AMX MVP-9000i manuale

AMX MVP-9000i
(1)
  • Numero di pagine: 2
  • Tipo di file: PDF
  • Installation Guide

    MVP-9000i

    Modero Wireless Touch Panel with Intercom

    Overview
    The AMX MVP-9000i-XX Modero Wireless Touch Panel is a mobile device that communicates with a NetLinx Master via a standard 802.11a/b/g Wireless Access Point. Panel to panel communication is enabled via a full duplex VoIP intercom interface with SIP integration. The MVP-9000i utilizes a 9" Color Active LCD to display a 800 x 480 pixel image using over 16.7M colors, offers control via four programmable capacitive touch buttons and a capacitive touch directional pad in addition to its touch screen, and features programmable firmware that can be upgraded via the device’s mini-USB port. The MVP-9000i
    comes in black (MVP-9000i-GB, FG5967-01) and white (MVP-9000i-GW,
    FG5967-02).For detailed installation, configuration, programming, file transfer, and operating
    instructions, refer to the MVP-9000i Operation/Reference Guide, available
    on-line at www.amx.com.
    Specifications
    Connector Locations
    With the unit facing you, the MicroSD card slot (for loading files such as photos), the mini-AB USB port (for programming and downloading firmware) and the DC power jack are located on the lower left side of the device. The connector for the Docking Stations is located on the bottom of the device. The MVP-9000i may be operated while docked in a Table Docking Station or Wall Docking Station, connected via the included power supply, or through battery power.The MVP-9000i supports an Ethernet over USB driver for panel downloads and firmware updates through its mini-USB port instead of through a standard Ethernet port. The mini-USB port may also be used, with an adaptor, with USB memory sticks and USB headphones.
    Warning: Although firmware upgrades can be done over wireless Ethernet; it is
    strongly recommended that firmware KIT files be transferred over a direct USB connection, or with the unit in the docking station using the wired ENET option, and only when the panel is connected to a power supply. If battery power or wireless connection fails during a firmware upgrade, the panel flash file system may become corrupted.
    FIG. 1 MVP-9000i-GB Touch Panel components
    MVP-9000i Specifications (FG5967-01/02)
    Dimensions (HWD): 7.62” x 10.98” x 1.06" (19.35 cm x 27.89 cm x 2.69 cm)
    Weight: 3.60 lbs (1.63 kg)
    Power Requirement
    (without charging):
    Constant current draw: 1.1 A @ 12 VDC
    Startup current draw: 1.2 A @ 12 VDC
    If panel is mounted onto a TDS or WDS, add 0.1 A to the
    above figures.
    Power Requirement
    (while charging):
    Panel while charging battery:
    Constant current draw: 2.0 A @ 12VDC
    If panel is mounted onto a TDS or WDS, add 0.1 A to the
    above figures.
    Minimum power
    supply required:
    PS3.0 Power Supply (FG423-30)
    PS-POE-AT High Power PoE Injector (FG423-81) through
    the Table Docking Station and Wall Docking Station
    Power Modes: ON: All necessary modules are powered up and device
    remains online with the NetLinx Master.
    ASLEEP: Only the backlight will be turned off after the user
    selectable time of inactivity has elapsed. Panel resumes
    the ON mode in ~ 1 second after being touched.
    STANDBY: Power to all components other than the touch
    screen is turned off after the user selectable time of
    inactivity has elapsed. Device will turn back on by touching
    the screen. Re-acquiring a WAP connection may require
    up to 10 seconds.
    SHUTDOWN: Power to all peripherals and components is
    turned off. The system remains in this mode until it is
    rebooted.
    Battery Duration: On: 5 hours; Sleep: 10 hours; Standby: 3 days
    Certifications: FCC Class B
    •CE
    •IC
    VCCI
    •C-Tick
    Memory: 4GB internal MicroSD (3.1GB accessible to user)
    Docking Station interface connector
    Speaker
    Directional pad
    Capacitive touch buttons (4)
    Microphone
    Mini-USB
    connector
    Stylus
    MicroSD
    card slot
    DC power
    jack
    memory
    Status LED
    MVP-9000i Specifications (Cont.)
    Screen Properties: Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh
    rate
    Aspect ratio: 16 x 9
    Brightness (luminance): 400 cd/m2
    Channel transparency: 8-bit Alpha blending
    Contrast ratio: 900:1 max.
    Display colors: 16.7M colors (24-bit color depth)
    Dot/pixel pitch: 0.246 mm
    Panel type: TFT Color Active-Matrix (IPS technology)
    Active Screen Area: 7.75” x 7.40” (196.80 mm x 188.08 mm)
    9" (22.86 cm) diagonal
    Viewing Angle: Up/Down/Left/Right: 85/85/85/85
    Audio: Mono speaker: 4 Ohm, 2 Watts 300Hz cutoff frequency
    Infrared
    Communication:
    IR Transmit only, including AMX 38KHz, AMX 455KHz, and
    3rd party IR.
    Operating/Storage
    Environments:
    Operating Temperature: 0° C (32° F) to 40° C (104° F)
    Battery Charging Temperature: 0° C (32° F) to 30° C (86° F)
    Operating & Battery Charging Humidity: 20% to 85% RH
    Storage Temperature: -10° C (-14° F) to 60° C (140° F)
    Storage Humidity: 5% - 85% RH
    Included
    Accessories
    PS3.0 Power Supply (FG423-30)
    Stylus (pre-installed onto the left side of the device)
    Other AMX
    Equipment:
    MVP-TDS-9-GB Black Table Docking Station (FG5967-10)
    MVP-TDS-9-GW White Table Docking Station (FG5967-11)
    MVP-WDS-9-GB Black Wall Docking Station (FG5967-12)
    MVP-WDS-9-GW White Wall Docking Station (FG5967-13)
    CC-MINIUSB Mini USB to PC Cable Adapter (FG5967-20)
    MicroSD card - 4GB (FG2116-81)
    MicroSD card - 8GB (FG2116-82)
    MVP-BP-9 Replacement Battery Pack (FG5967-21)
    PS-POE-AT High Power PoE Injector (FG423-81)
    MVP-STYLUS-52-XX Replacement Stylus, pack of 3
    (Black: FG5966-21; White: FG5966-22)
    FIG. 2
    MVP-9000i-GW Kickstand View, showing connector locations
    Mini-USB port
    DC power jack
    Stylus
    Kickstand
    MiicroSD
    card slot
    memory
AMX MVP-9000i

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul AMX MVP-9000i o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di AMX MVP-9000i rispondere correttamente alla tua domanda.

Specifiche AMX MVP-9000i

Non è necessario acquistare altoparlanti esterni per un avere un audio eccezionale. Con gli altoparlanti integrati, ques...
Generale
Marca AMX
Modello MVP-9000i
Prodotto Monitor
EAN 718878009222, 7188780092224
Lingua Inglese
Tipo di file PDF
Display
Dimensioni schermo 9 "
Tempo di risposta - ms
Luminosità schermo 400 cd/m²
Rapporto di contrasto 900:1
Tipo di display LCD
Risoluzione del display 800 x 480 Pixel
Angolo di visualizzazione (orizzontale) 85 °
Angolo di visualizzazione (verticale) 85 °
Formato 16:9
Area di visualizzazione effettiva 118 x 197 mm
Colori del display 16,78 milioni di colori
Prestazione
Tipologia touch screen Multi utente
OmniTapps Multitouch compatibility -
Altoparlanti incorporati
Potenza in uscita (RMS) 2 W
Altre caratteristiche
Intervallo temperatura di funzionamento 32 - 104 °F
Dimensioni (LxPxA) 279 x 27 x 194 mm
Dimensioni e peso
Peso (senza supporto) 1630 g
Condizioni ambientali
Intervallo di temperatura -20 - 60 °C
Intervallo temperatura di funzionamento 0 - 40 °C
Range di umidità di funzionamento 20 - 85 %
Umidità 5 - 85 %
Ergonomia
Montabile a parete -
Design
Colore del prodotto Nero

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo AMX MVP-9000i .

La tua domanda non è elencata? Fai la tua domanda qui