Big Agnes Rattlesnak SL4 mtnGLO manuale

(1)
  • Numero di pagine: 2
  • Tipo di file: PDF
Cut here to remove. Do Not Tear!

RATTLESNAKE SL mtnGLO

TM

SET UP INSTRUCTIONS

1. Remove contents from stu sack. Spread the tent body out at on the ground
2. Stake out the four corners of the tent body.
3. Assemble the two poles: One main pole with two hubs and one short straight cross-
over pole. To ensure each pole section is fully seated insert each pole section into
the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled pole set on top of the tent body. SL1 & SL2: Align the nar-
rower end of the main pole set with the silver webbing at the end of the tent and
the wider end of the pole set with the green webbing at the head end of the tent.
SL3 & SL4: the main pole has equal length pole sections so the pole tips may be
inserted at either end.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. Place the crossover pole across the top of the ridge pole. Clip the ends of the cross-
over pole into the clear plastic Ball Cap clips that are located above the doors on the
tent body.
8. Drape the rainy over the tent body aligning the silver and green webbing of the
tent body to the silver and green webbing of the y. Note: There are SQ rings on the
underside of the rainy above both doors that are used in the Fast Fly set up.
9. Make sure the webbing at the corners of the rainy is completely slackened. Attach
the buckles of the rainy to those on the tent body.
10. Stake out the vestibules.
11. Evenly tension the webbing on each corner as needed to keep the rainy taut.
12. Stake out all guylines.
Separate 6”, large diameter pole segment included for emergency
eld repair. Slide repair pole over the break to act as a splint.

FAST FLY SET UP INSTRUCTIONS

If you purchase the optional Big Agnes footprint for your Rattlesnake SL tent, it will en-
able you to pitch a shelter while leaving the tent body behind. The Fast Fly conguration
requires the footprint, rainy, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. Assemble the two poles: One main pole with two hubs and one short straight cross-
over pole. To ensure each pole section is fully seated insert each pole section into
the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled pole set on top of the tent body. SL1 & SL2: Align the nar-
rower end of the main pole set with the silver webbing at the end of the footprint
and the wider end of the pole set with the green webbing at the head end of the
footprint. SL3 & SL4: the main pole has equal length pole sections so the pole tips
may be inserted at either end.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. Drape the rainy over the pole structure, aligning the silver and green webbing of
the y with the silver and green webbing of the footprint.
6. Climb in and place the crossover pole across the middle of the ridge pole, inserting
the tips into the SQ rings located on the underside of the y.
7. Make sure the webbing at the corners of the rainy is completely slackened. Attach
the buckles of the rainy to those on the tent body.
8. Evenly tension the webbing on each corner as needed to keep the rainy taut.
9. Stake out all guylines.

Ball Cap

Hardware:

Rattlesnake SL1 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL3 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL2 mtnGLO
TM
Tent Body and Fly
Rattlesnake SL4 mtnGLO
TM
Tent Body and Fly

The mtnGLO™ tent light technology by Big Agnes

lets you light up the backcountry

How to use it:

1. Take the mtnGLO™ logo controller out of the pocket. Insert 3 AAA batteries in the

controller (batteries not included)

2. Put the controller back in the pocket and connect to the tent light USB

3. Push the button on the controller - one click is for full power, second click will

adjust the light to 50% power and the third click will turn it o.

4. Always disconnect the controller before packing your tent to save battery life

Ball Cap AssemblySQ Ring

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Big Agnes Rattlesnak SL4 mtnGLO o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Big Agnes Rattlesnak SL4 mtnGLO rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Big Agnes Rattlesnak SL4 mtnGLO. Il manuale rientra nella categoria Tende ed è stato valutato da 1 persone con una media di 9.1. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Big Agnes Rattlesnak SL4 mtnGLO o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Big Agnes Rattlesnak SL4 mtnGLO

Generale
Marca Big Agnes
Modello Rattlesnak SL4 mtnGLO
Prodotto Tenda
Lingua Inglese
Tipo di file PDF

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Big Agnes Rattlesnak SL4 mtnGLO .

La tua domanda non è elencata? Fai la tua domanda qui