Botex NETcon 1-3 manuale

Botex NETcon 1-3
7.5 · 1
PDF manuale
 · 1 pagina
Inglese
manualeBotex NETcon 1-3
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 451599_13.01.2020
EN

User manual

This manual contains important information on the safe operation of the product.
Read and follow the safety advice and instructions given. Retain the manual for future
reference. If you pass the product on to others please include this manual.

NETcon 13 Art-Net Node

For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.

Safety instructions

Intended use
This device is used to distribute ArtNet and Ethernet signals. Any other use or use
under other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages result-
ing from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! Never let children unattended use electrical devices.
Where to use the product
Never use the product
in conditions of extreme temperature or humidity
in extremely dusty or dirty areas
at locations where the unit can become wet
General handling
To prevent damage, never use force when handling the product.
Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.

Features

ArtNet / DMX converter
Bidirectional ArtNet Node for professional requirements
Conguration via built-in display directly on the device
RDM capable
Adjustable DMX repeat rate (1040Hz)
For 512 channels / one DMX universe
Converts either ArtNet to DMX or DMX to ArtNet
Black metal housing

Technical specications

Connections: 2×Ethernet RJ45 lockable
XLR 3-pin. DMX in and output
Power supply: via supplied power adapter: DC 5V /10W
Protective class: IP20
Dimensions (W×H×D): 167×130×110mm
Weight: 0.34kg

Using the product

Press MODE to enter the following menu, then use UP & DOWN to select the desired entry which you call up with SETUP:
1. IP address
2.x.x.x IP type 1, automatically generated, not editable
IP address setting for ArtNet must be made according to the setting
under IP type (4.).
10.x.x.x IP type 2, automatically generated, not editable
DHCP IP type 3, automatically generated, not editable
192.168.000.008 IP type 4, adjustable by user
2. Subnet mask
255.000.000.000 IP type 1, automatically generated, not editable
Subnet mask setting for ArtNet must be made according to the
setting under IP type (4.).
255.000.000.000 IP type 2, automatically generated, not editable
DHCP IP type 3, automatically generated, not editable
255.255.255.000 IP type, adjustable by user
3. Universe 000255
ArtNet universe setting must be made according to the setting under
IP type (4.).
4. IP type
2.x.x.x (Auto) IP address, automatically generated, not editable
Species the IP type for ArtNet.
10.x.x.x (Auto) IP address, automatically generated, not editable
DHCP IP address, automatically generated, not editable
Custom IP IP address adjustable by user
5. Unicast address xxx.xxx.xxx.xxx
For setting the ArtNet unicast address. The validity of a unicast ad-
dress requires the settings ‘DMX | DIR: IN’ and ‘unicast | ON’.
6. DMX Dir
In DMX input, conversion DMX -> ArtNet
For setting the ArtNet direction.
Out DMX input, conversion ArtNet -> DMX
7. Unicast
On, (Unicast on)
Mode Master Slave Notes:
The validity of the unicast setting requires the setting ‘DMX | DIR: IN’.
‘XXX’ means value irrelevant’.
The unicast address of master and IP address is the same as in uni-
cast mode. However, there is one special case, for example, the slave
IP address: 192.168.1.1, master unicast address: In addition to the
setting of 192.168.1.1, it can also be set to 192.168.1.255, where 255
is a general address. The last IP range of the slave is 0-254. Therefore,
we recommend not to use 255 as a special address.
IP address 192.168.1.0 192.168.1.1
Subnet mask 255.255.255.0 255.255.255.0
Universe 0 0
IP type 4) Custom IP 4) Custom IP
Unicast address 192.168.1.1 xxx.xxx.xxx.xxx
DMX Dir In Out
Unicast On O
O, (Unicast o), Broadcast
Mode Master Slave
IP address 192.168.1.0 192.168.1.1
Subnet mask 255.255.255.0 255.255.255.0
Universe 0 0
IP type 4) Custom IP 4) Custom IP
Unicast address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
DMX Dir In Out
Unicast O O
8. RDM Enable
On
To enable (On) or disable (O) the RDM function.
O
9. Frame Rate 1040(Hz) Sets the DMX repeat rate for ArtNet.
10. Settings
Lock
On
Enables (On) or disables (O) automatic display lock. To release the
display lock, keep [Mode] and [Setup] pressed for 3 sec.
O
Back light
On Enables (On) or disables (O) backlight auto-o function when not
in use.
O
Factory
Yes
Reset to delivery condition.
No
11. Exit To exit the menu.

Consulta qui gratuitamente il manuale per il Botex NETcon 1-3. Il manuale rientra nella categoria Non classificato ed è stato valutato da 1 persone con una media di 7.5. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Botex NETcon 1-3 o hai bisogno di aiuto? Fai la tua domanda qui

Ho bisogno di aiuto?

Hai una domanda relativa a Botex e la risposta non è nel manuale? Fai qui la tua domanda Fornisci una descrizione chiara e completa del problema e della tua domanda. Migliore sarà la descrizione del tuo problema e della domanda, più facile sarà per gli altri proprietari di Botex fornirti una buona risposta.

Numero di domande: 0

Generale
Botex
NETcon 1-3
Non classificato
Inglese
Scheda tecnica (PDF)

Non riesci a trovare la risposta alla tua domanda nel manuale? Puoi trovare la risposta alla tua domanda nelle FAQ sul Botex NETcon 1-3 che trovi di seguito.

La tua domanda non è elencata? Fai la tua domanda qui

Nessun risultato