Brother P-touch 1000

Brother P-touch 1000 manuale

(2)
  • USER’S GUIDE
    1
    OOO
    / Español
    www.P-touch.com
    LN6001001
    Printed in China
    English
    FCC NOTICE
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
    this device may not cause harmful interference, and (2) this device must accept any interference
    received,including interference that may cause undesired operation.
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
    Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
    interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
    radio communications. However, there is no guarantee that interference will not occur in a particular
    installation. If this equipment does cause harmful interference to radio or television reception, which can be
    determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
    one or more of the following measures:
    - Reorient or relocate the receiving antenna.
    - Increase the separation between the equipment and receiver.
    - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
    - Consult the dealer or an experienced radio/TV technician for help.
    - Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s
    authority to operate the equipment.
    Patent numbers and patent publication numbers which are related to this product are as below:
    USP4839742 USP4976558 USP5009530 USP5120147
    USP4927278 USP4983058 USP5069557 USP5314256
    GENERAL PRECAUTIONS
    Use only Brother TZ tapes with this machine. Do not use tapes that do not have
    the mark.
    Do not pull on the tape being fed from the P-touch, otherwise the tape cassette
    may be damaged.
    Do not attempt to cut the tape while printing or feeding since this will damage the tape.
    Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
    cloth.
    Remove the batteries and disconnect the AC adapter if you do not intend to use the
    machine for an extended period of time.
    Note: If power is disconnected for more than three minutes, all text shown in the dis-
    play and any text files stored in the memory will be lost. Language and unit
    settings will also be cleared.
    Do not put any foreign objects into or heavy objects on the machine.
    Do not expose the machine to extremely high temperatures or high humidity. Never
    leave it on the dashboard or in the back of your car.
    Avoid using the machine in extremely dusty places. Keep it out of both direct sunlight
    and rain.
    Do not leave any rubber or vinyl on the machine for an extended period of time, oth-
    erwise the machine may be stained.
    Do not touch the print head mechanism. If the head is touched, clean it immediately
    with a soft wipe (e.g. a cotton swab) to avoid permanent damage.
    To avoid injuries, do not touch the cutter's edge.
    Use only the AC adapter designed exclusively for this machine. Use of any oth-
    er adapter may void the warranty.
    SPECIFICATIONS
    Dimensions: 4.32" (W) 7.84" (D) 2.2" (H)
    (108mm (W) 196mm (D) 55mm (H))
    Weight: 0.74 lbs. (335g) (without batteries and tape cassette)
    Power supply: Six AAA size alkaline batteries or optional AC adapter
    (model AD-30)
    Tape cassette: Brother TZ tape
    1/4" / 3/8" / 1/2" (width) (6mm, 9mm, 12mm (width))
    Cutter unit: TC-5 (replacement)
    POWER SUPPLY & TAPE CASSETTES
    a
    Remove the back cover by pressing in the rough area at the top end of the machine
    and then flip away from the machine.
    If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are
    already installed, remove them.
    b
    -1 Insert the batteries into the battery compartment with the positive end of the bottom
    three batteries pointing away from the cutter lever, and the positive end of the top
    three batteries pointing toward the tape cutter lever.
    Always replace all six batteries at the same time using brand new ones.
    b
    -2 Insert a tape cassette, making sure that it
    snaps into place.
    Make sure that the end of the tape feeds under
    the tape guides.
    Be sure to remove the paper tab when install-
    ing a new tape cassette.
    If the ink ribbon is loose, use your finger to
    wind the toothed wheel in the direction of the
    arrow on the cassette.
    Use only Brother TZ tapes with this machine.
    c
    Attach the back cover by inserting the two hooks at the bottom into the slots on the
    machine, then pushing down firmly on the cover until it snaps into place.
    After you have installed the tape, feed the tape (see FEEDING) once and then push in the
    tape cutter lever to cut the tape.
    Optional AC adapter (model AD-30)
    a
    Insert the plug on the adapter cord into the adapter jack on the bottom end of the
    machine.
    b
    Plug the other end of the adapter to the nearest standard electrical outlet.
    Cutter unit (replacement)
    If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, re-
    place with new cutter unit (stock no. TC-5) by obtaining from an authorized brother dealer.
    Tape cutter lever
    Tape exit slot
    Print head
    Cutter unit
    KEYBOARD & LCD
    The LCD shows one row of 8 characters; however,
    the text that you enter can be up to 55 characters in length.
    Power On/Off
    Press a to turn the machine on and off.
    The machine automatically turns off if no key is pressed
    within 5 minutes.
    Print key
    Function key
    Enter key
    Backspace / Cancel
    key
    Caps key
    Space key
    LCD indicators
    Power key
    Cursor key
    Num keys/Function shortcuts
    Character keys
    Accent key
    Symbol key
    Function
    Style
    Upper case/Lower case
    Cursor
    Size
    Underline/Frame
    GETTING STARTED
    a
    Start your machine
    Supply power by using six AAA batteries or the optional AC adapter,
    and then press a.
    b
    Set the language (English/French/German)
    Choose a language with b and press e.
    Check the display and press e. (To cancel, press d.)
    c
    Set the unit (mm/inch)
    Choose a unit with b and press e.
    Check the display and press e. (To cancel, press d.)
    NOTE: You can also display the languages and units by pressing the cor-
    responding Num keys (1-3).
    The available accented characters depend on the language setting.
    NOTE:
    To cancel operations, press d.
    To delete entries backward, press d.
    To initialize the settings, turn off the machine and then while hold-
    ing down f and d, press a to turn the machine back on.
    Finally, release f and d.
    MAKING TEXT
    Switching UPPER CASE/LOWER CASE
    " j
    Upper case Lower case
    Making A TWO LINE LABEL
    Move the cursor to where the second line starts and press e.
    NOTE: Use either 9 mm or 12 mm wide tape for two line labels.
    Display Label image
    Entering SYMBOLS
    " h > B > b > e
    NOTE: You can also display the symbols by pressing h / b.
    To go to the next group, press h.
    To skip to a different group, press the corresponding character key of the group.
    You can also scroll the symbols in each group by pressing the corresponding character
    key of the group repeatedly.
    Group Symbols Group Symbols
    AF
    BG
    CH
    DI
    E
    ABC
    abc
    ABC
    abc
    ABC
    DEF
    Entering ACCENTED CHARACTERS
    " g > E > b > e
    NOTE: You can also display the characters by pressing g / b.
    To go to the next letter group, press g.
    To skip to a different letter group, press the corresponding charac-
    ter key.
    You can also scroll the characters in each letter group by pressing
    the corresponding character key repeatedly.
    Letter Accented characters Letter Accented characters
    Aa
    Cc
    Ee
    Ii
    Nn
    Oo
    Uu
    y
    DESIGNING LABELS
    Setting FONT (f+1)
    " f > f/b > e > f/b > e
    HELSINKI OKLAHOMA
    Setting SIZE (f+2)
    " f > f/b > e > f/b > e
    AUTO automatically adjusts the text size according to the tape width.
    SIZE1 SIZE2 SIZE3
    SIZE4 SIZE5
    NOTE: Two line labels are printed in SIZE1 regardless of the setting.
    Only AUTO, SIZE1 and SIZE2 can be used on 1/4” tapes.
    Setting STYLE (f+3)
    " f > f/b > e > f/b > e
    NORMAL BOLD OUTLINE SHADOW
    ITALIC I+BOLD (ITALIC + BOLD) I+OUTL (ITALIC + OUTLINE)
    I+SHADOW (
    ITALIC + SHADOW
    ) VERTICAL MIRROR
    NOTE: Two line texts are printed in NORMAL regardless of the setting.
    Use clear tape in MIRROR, so the labels appear on the other side when stuck on glass,
    windows or other transparent surfaces.
    Setting UNDERLINE/FRAME (f+4)
    " f > f/b > e > f/b > e
    OFF UNDL (Underline) ROUND
    BANNER WOODEN VINE
    NOTE: No underline or frame is set to texts in VERTICAL style.
    Setting TAB (f+5)
    You can make aligned texts by setting tabs.
    Example: To set a tab between “abc” and “d”
    " b > f > f/b > e
    Label image
    NOTE: The cursor should be positioned where you set a tab.
    Setting TAB LENGTH (0.0" - 4.0") (f+6)
    " f > f/b > e > b > e
    NOTE: You can also select the length by entering the length with Num keys.
    Setting LABEL LENGTH
    (AUTO/1.6
    "
    - 11.8
    "
    )
    (f+7)
    " f > f/b > e > b > e
    NOTE: You can also select the length by entering the length with Num keys.
    To return to AUTO, press any alphabet key or i.
    Using AUTO FORMAT (f+8)
    You can choose label length from six formats to create labels for various ap-
    plications.
    " f > f/b > e > f/b > e
    To CLEAR (f+0)
    All text and settings will be cleared.
    " f > f/b > e
    Tab
    abcd
    LCD Application Length LCD Application Length
    VCR VHS
    VCR VHS 5.5"
    FILE TAB
    File Tab 2.8"
    FD 3.5" 3.5" Floppy Disk 2.7" AUDIO Audio Cassette 3.5"
    CD CASE
    CD 3.9" VIDEO 8 VCR 8mm (Video 8) 3.6"
    PRINTING
    TEXT PREVIEW (f+c)
    You can preview the text before printing.
    " f > f/b > e
    NOTE: The LCD shows the whole text and the label length (mm/inch), then returns to the original
    text.
    Only the text can be previewed, but not the font, style, size, underline/frame or any addi-
    tional features.
    FEEDING (TAPE FEED) (f+i)
    " f > f/b > e
    PRINTING
    " c
    NOTE: To cut off the label, push in the tape cutter lever on the upper-right corner of the machine.
    To prevent damage to the tape, do not try to cut while the message PRINT or FEED is
    displayed.
    TAPE MARGIN (f+.)
    " f > f/b > e > f/b > e
    FULL/HALF/NARROW is for leaving equal margins on both sides of the text.
    NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.
    FULL HALF NARROW
    CHAIN is for printing more than 1 copy of a label with minimum margin
    <e.g. 1>. You can also create a label containing texts in various styles; print
    a text in one style, and before feeding, enter the second text in another style
    <e.g. 2>.
    NOTE: FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise
    A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may
    damage the tape cassette.
    CHAIN
    <e.g. 1> <e.g. 2>
    Print Option/REPEAT PRINTING (f+,)
    You can print up to 9 copies of each label.
    " f > f/b > e > f/b >
    e > f/b > e
    NOTE: When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
    (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
    not try to pull the tape since this may damage the tape cassette.
    When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
    scissors to separate the labels.
    Print Option/NUMBERING (f+,)
    You can print many copies of the same text while increasing a selected num-
    ber by 1 after each label is printed.
    Example: To print copies of a label containing a serial number (0123, 0124 and 0125)
    " b > f > f/b > e >
    f/b > e > f/b
    > e
    NOTE: The last number that will be printed must be larger than the number selected in the text,
    otherwise the message ERROR appears.
    When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
    (see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
    not try to pull the tape since this may damage the tape cassette.
    When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
    scissors to separate the labels.
    1" 1" 1/2" 1/2" 1/6" 1/6"
    (feed&cut)
    ABCABCABC
    (feed&cut)
    ABC
    ABC
    DEF
    MEMORY (F+9)
    You can store up to 9 frequently used text files and recall them to create labels more
    quickly and easily. (Total memory size: about 300 characters.)
    " f > f/b > e
    To STORE;
    " f/b > e > b > e
    To RECALL;
    " f/b > e > b > e
    To DELETE;
    " f/b > e > b > e
    NOTE: When the memory is full, delete one or more files and then store the new file.
    You can also choose a file number by pressing the corresponding Num key (1-9).
    FUNCTION SHORTCUTS (F+...)
    In addition to the basic steps to search for a function, PT-1000 provides you with function
    shortcuts so you can easily jump to a frequently used function just by pressing
    f and the
    shortcut key shown in the table below. To confirm, press
    e (or the shortcut key again).
    NOTE: PRINT OP contains two functions, REPEAT PRINTING and NUMBERING.
    For PREVIEW and FEED, press e to preview/feed after the LCD message appears.
    Key
    LCD message
    Function
    Key
    LCD message
    Function
    1
    FONT Character font
    8
    A/F Auto Format
    2
    SIZE Character size
    9
    MEMORY Memory
    3
    STYLE Print style
    0
    CLEAR Clear text + style
    4
    UNDL/FRM Underline/Frame
    .
    MARGIN Tape margin
    5
    TAB Tab setting
    ,
    PRINT OP Repeat/Numbering
    6
    TAB LEN Tab length
    c
    PREVIEW Text preview
    7
    LENGTH Label length
    i
    FEED Tape feed
    NOTE: You can also refer to the chart engraved on the back of the machine.
    STORE
    RECALL
    DELETE
    ERROR MESSAGE LIST
    TROUBLESHOOTING
    ERROR An error occurred.
    BATTERY The batteries are weak.
    B
    A T T E R Y The batteries are empty.
    FULL
    The maximum number of characters (55 characters)
    have already been entered or the memory is full.
    LONG TXT The text length exceeds the selected label length.
    Problem Solution
    The display stays blank after you
    have turned on the machine.
    Check that the batteries are correctly inserted.
    If the batteries are weak, replace them.
    Check that the adapter is correctly connected.
    The machine does not print, or the
    printed characters are blurred.
    Check that the tape cassette has been inserted
    correctly.
    If the tape cassette is empty, replace it.
    Check that the character size is appropriate for the
    width of the tape that is used.
    The printed characters are not
    formed properly.
    If the batteries are weak, replace them.
    Striped tape appears. The tape cassette is empty. Replace it.
    The memory has cleared on its own. The batteries may be weak. Replace them.
    A blank horizontal line appears
    through the printed label.
    There may be some dust on the print head.
    Remove the tape cassette and use a dry cotton
    swab to gently wipe the print head with an up-and-
    down motion.
    The machine has “locked up” (i.e.,
    nothing happens when a key is
    pressed, even though the machine is
    on).
    Turn off the machine, and then while holding down
    f and d, press a to turn the machine back
    on. Finally, release
    f and d.
    Note: The text and formats in the display and all
    text files stored in the memory are erased.
    Also, the language and unit settings will be
    cleared.
Brother P-touch 1000

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Brother P-touch 1000 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Brother P-touch 1000 rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Brother P-touch 1000. Il manuale rientra nella categoria Macchina etichettatrice ed è stato valutato da 2 persone con una media di 9. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Brother P-touch 1000 o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Brother P-touch 1000

Generale
Marca Brother
Modello P-touch 1000
Prodotto Macchine etichettatrici
EAN 4977766658607
Lingua Inglese
Tipo di file PDF
Velocità di stampa
Velocità di stampa 10
Design
Struttura tastiera ABC
Colore del prodotto Blu
Dimensioni e peso
Larghezza 108
Profondità 196
Altezza 55
Peso 335
Gestione energetica
Numero di batterie 6
Tipo batteria Mini Stilo AAA
Tecnologia batteria Alcali✗
Prestazione
Tipo nastro TZ

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Brother P-touch 1000 .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più