Brother PT-H100

Brother PT-H100 manuale

(1)
  • ELECTRONIC LABELING SYSTEM
    Follow these guidelines to avoid the risk of fire, burns, injury,
    rupture, overheating, abnormal odor or smoke.
    Do not use the P-touch labeler in places of high humidity such as bathrooms.
    Do not allow the P-touch labeler/batteries to get wet, for example, by handling them
    with wet hands or spilling beverages on to them.
    Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,
    immediately rinse your eyes with a large amount of clean water, and then seek
    medical attention.
    Do not disassemble or modify the P-touch labeler/batteries.
    Do not allow a metal object to contact both the plus and minus ends of a battery.
    Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.
    Do not throw the batteries into fire or expose to heat.
    Remove batteries immediately and stop using the P-touch labeler if you notice
    abnormal odor, heat, discoloration, deformation or anything unusual while using or
    storing it.
    Do not use a damaged or leaking battery as the fluid may get on your hands.
    Do not use a deformed or leaking battery or one whose label is damaged. There is a
    possibility of generating heat.
    Follow these guidelines to avoid personal injury, liquid
    leakage, burns or heat.
    When the P-touch labeler is not being used, store it out of the reach of children. In
    addition, do not allow children to put the P-touch labeler parts or labels in their
    mouths. If any object has been swallowed, seek medical attention.
    Do not touch metal parts around the print head immediately after printing.
    Do not touch the cutter blade.
    If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with
    clean water.
    Remove the batteries if you do not intend to use the P-touch labeler.
    Do not use a battery other than that specified. Do not use combinations of old and
    new batteries or combinations of different types, different charging levels, different
    manufacturers or different models. Do not insert a battery with its plus and minus
    ends reversed.
    Do not drop or hit the P-touch labeler.
    Do not press on the LCD display.
    Do not put your finger inside the P-touch labeler when you close the cassette cover.
    Before using Ni-MH rechargeable batteries, carefully read the instructions for the
    batteries and battery charger, and be sure to use them correctly.
    When using Ni-MH rechargeable batteries, charge the batteries with a specialized
    battery charger before using the batteries.
    Depending on the location, material, and environmental conditions, the label may
    unpeel or become irremovable, the color of the label may change or be transferred
    to other objects. Before applying the label, check the environmental conditions and
    the material.
    Do not use the P-touch labeler in any way or for any purpose not described in this
    guide. Doing so may result in accidents or damage the P-touch labeler.
    Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not
    have the mark.
    Only use a soft, dry cloth to clean the labeler; never use alcohol or other organic
    solvents.
    Use a soft wipe to clean the print head; never touch the print head.
    Do not put any foreign objects into the tape exit slot or battery compartment, etc.
    Do not place the P-touch labeler/batteries in direct sunlight or rain, near heaters or
    other hot appliances, in any location exposed to extremely high or low temperatures
    (e.g., on the dashboard or in the back of your car) or high humidity, or in dusty
    locations.
    Do not apply excessive pressure to the cutter lever.
    Do not try to print if the cassette is empty; it will damage the print head.
    Do not pull the tape while printing or feeding; it will damage the tape and the P-touch
    labeler.
    Any data stored in memory will be lost due to failure or repair of the P-touch labeler,
    or if the battery expires.
    The P-touch labeler is not equipped with a charging feature for rechargeable
    batteries.
    The length of the printed label may differ from the displayed label length.
    A protective clear plastic sticker is placed over the display during manufacturing and
    shipping. This sticker should be removed prior to use.
    When power is disconnected for more than three minutes, all text, format settings and
    any text files stored in the memory will be cleared.
    Safety Precautions
    Indicates a potentially hazardous
    situation which, if not avoided,
    could result in serious injuries.
    WARNING
    Indicates a potentially hazardous
    situation which, if not avoided,
    may result in minor or moderate
    injuries.
    General Precautions
    CAUTION
    FCC NOTICE
    This device complies with Part 15 of the FCC Rules. Operation is subject to
    the following two conditions: (1) this device may not cause harmful
    interference, and (2) this device must accept any interference received,
    including interference that may cause undesired operation.
    This equipment has been tested and found to comply with the limits for a Class
    B digital device, pursuant to Part 15 of the FCC Rules. These limits are
    designed to provide reasonable protection against harmful interference in a
    residential installation. This equipment generates, uses, and can radiate radio
    frequency energy and, if not installed and used in accordance with the
    instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular
    installation. If this equipment does cause harmful interference to radio or
    television reception, which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the interference by one or more
    of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Consult the dealer or an experienced radio/TV technician for help.
    Important
    Changes or modifications not expressly approved by Brother Industries,
    Ltd. could void the user’s authority to operate the equipment.
    Power Supply and Tape Cassette
    Open the cassette cover by pressing the
    above indicated area at the top end of the
    machine.
    If a tape cassette is already installed, remove it by
    pulling it straight up. Also, if batteries are already
    installed, remove them.
    Make sure that the power is turned off when
    replacing batteries or tape cassettes.
    Insert six new AAA alkaline batteries
    (LR03) or fully charged Ni-MH batteries
    (HR03), making sure that their poles
    point in the correct directions.
    Users of alkaline batteries:
    Always replace all six batteries at the
    same time with brand new ones.
    Users of Ni-MH batteries:
    Always replace all six batteries at the
    same time with fully charged ones.
    NOTE
    Visit us at http://solutions.brother.com/ for the latest
    information about the recommended batteries.
    Insert a tape cassette, making sure that
    it snaps into place.
    Make sure that the end of the tape feeds under
    the tape guides.
    Use only Brother TZe tapes with this machine.
    Securely close the cassette cover, making
    sure that it snaps into place.
    1
    Tape cutter
    lever
    Cassette
    cover
    2
    Print head
    3
    Toothed
    wheel
    Cutter’s
    edge
    End of tape
    Tape
    exit slot
    Tape guide
    4
    NOTE
    The LCD shows one row of 12 characters; however, the text that
    you enter can be up to 80 characters in length.
    While selecting the settings, press the Space key to go back to
    the default item.
    LCD Display & Keyboard
    18
    19
    5
    6
    7
    20
    9
    1
    2
    3
    4
    21
    22
    12
    11
    10
    14 23
    13
    24
    25
    16
    17
    15
    8
    1. Size
    2. Cursor
    3. Caps
    4. Underline/Frame
    5. Width
    6. Style
    7. Label Length
    If a specific label length has been
    selected, also appears.
    8. Guidance (left, right)
    9. Power key
    10. Cursor key : Right
    11. Cursor key : Left
    12. Backspace key
    13. Size key
    14. Style key
    15. Character keys
    16. Caps key
    17. Symbol key
    18. Menu key
    19. Clear key
    20. Print key
    21. Enter key
    22. Auto Designs key
    23. Frame key
    24. Accent key
    25. Space key
    The print preview is a generated image of the label, and may
    differ from the actual label when printed.
    Label length shown on LCD may slightly differ from the actual
    label length when printed.
    1 Start your machine.
    Supply power by using six AAA batteries, and then press
    .
    2 Set the language.
    3 Set the unit of measurement.
    The default setting is [inch].
    NOTE
    The machine automatically turns off if no keys are pressed within
    five minutes.
    To cancel any operation, press .
    Initial Settings
    / [Language] /
    [English/Español/Français/Hrvatski/Italiano/Magyar/
    Nederlands/Norsk/Polski/Português/Portug. (BR)/
    Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/
    Čeština/Dansk/Deutsch] .
    / [Unit]
    / [inch/mm] .
    Troubleshooting
    X Error message X What to do when...
    Message Cause/Remedy
    Low Battery!
    The batteries are weak.
    If using AAA alkaline batteries: Replace them with new
    ones.
    If using Ni-MH batteries: Charge them fully.
    Battery Dead
    The installed batteries are running low.
    Invalid!
    An invalid number was entered as the label length.
    (This is not displayed in Auto Designs function.)
    No Text!
    You tried to print a text file when there is no data
    stored in the memory.
    is pressed when no text is entered.
    You tried to select Text Preview or Cable Label when
    no text is entered.
    was pressed when no text was entered while
    using the DECO MODE or Auto Designs function.
    Line Limit!
    You tried to enter a 3rd line by pressing .
    You tried to print or preview two lines of text while
    0.13" (3.5mm) or 0.23" (6 mm) tape is installed. Install
    tape of a larger size.
    No Cassette!
    You tried to print a label when there is no cassette
    installed.
    Cutter Error
    The tape cutter lever was used during the printing
    process.
    Text Full!
    The maximum number of characters (80 characters*)
    have already been entered.
    *50 characters - for Auto Designs function and DECO
    MODE
    Text Limit!
    With the DECO MODE function:
    Since the number of entered characters exceeds the
    label length, reduce the text.
    All other functions:
    Since the number of entered characters exceeds the
    label length, reduce the text, or select [Auto] as the
    label length.
    No Frame OK?
    Printing on 0.13" (3.5mm) tape with invalid Frame
    setting ON. (Select to print with no Frame,
    to cancel.)
    OK to Feed?
    Feeding tape after printing when [Chain Print] is
    selected. Refer to “Setting Margin”.
    Insert 0.47"
    Only 0.47"(12mm) tapes are available for use with
    DECO MODE function.
    Wrong Tape!
    Use a tape cassette with the mark.
    Message Cause/Remedy
    Problem Solution
    The display stays blank
    after you have turned on
    the machine.
    Check that the batteries are correctly
    inserted.
    If the batteries are weak, replace them.
    When the label is printed
    out, the margin(space) is
    too large on both sides of
    the text.
    See “Setting Margin” in this users guide
    and select [Half] or [Narrow] to have
    smaller margins for your label.
    The machine does not
    print, or the printed
    characters are not formed
    properly.
    Check that the tape cassette has been
    inserted correctly.
    If the tape cassette is empty, replace it.
    Check the cassette cover is properly
    closed.
    The setting has cleared
    on its own.
    The batteries may be weak. Replace
    them.
    When power is disconnected for more
    than three minutes, all text & formats in
    the display will be lost. Language and Unit
    settings will also be cleared.
    A blank horizontal line
    appears through the
    printed label.
    There maybe some dust on the print
    head. Remove the tape cassette and use
    a dry cotton swab to gently wipe the print
    head with an up-and-down motion.
    The machine has “locked
    up” (i.e., nothing happens
    when a key is pressed,
    even though the machine
    is on.)
    Refer to “Resetting the P-touch”.
    The power turns off when
    you try to print.
    The batteries may be weak. Replace
    them.
    Check that the batteries are correctly
    inserted.
    The tape does not feed
    properly or the tape gets
    stuck inside the machine.
    Check that the end of the tape feeds
    under the tape guides.
    The cutter lever is used while printing. Do
    not touch the cutter lever during printing.
    All text and format
    settings need to be
    cleared to create a new
    label.
    Press and select [Text&Format].
    The LCD is set to an
    incorrect language.
    Refer to “Initial Settings”.
    Problem Solution
    BASIC USAGE
    X Switching Upper Case/Lower Case
    Upper case ( ON) Lower case ( OFF)
    X Making Two Lines of Text
    To make two lines of text, do one of following:
    a)
    Enter the text for the first line and then press for the
    second line.
    b)
    Move the cursor to where the second line starts and press
    .
    Use either 0.35" (9mm) or 0.47" (12mm) wide tape for two line text.
    NOTE
    Do not press after the second line; otherwise the “Line Limit!
    error message will appear.
    X To Clear
    By pressing , the letters will be deleted one by one.
    To delete all text and settings :
    To delete text only :
    X Entering Accented Characters
    To cancel the current operation, press .
    The order of accented characters differs depending on the
    selected LCD language.
    X Changing Label Length
    NOTE
    After the label is printed, cut along the printed dots (:) with
    scissors so that the label length matches the machine setting.
    If a specific label length has been selected, also appears in
    the LCD.
    X Preview
    You can preview the text before printing.
    Only the text can be previewed, not the size, font or any
    additional features.
    X Feeding (Tape Feed)
    X Printing
    If you need only 1 copy of the label, press without
    selecting the number of copies.
    The number of copies can also be specified by pressing a
    number key.
    To prevent damage to the tape, do not touch the cutter lever
    while the message "Printing..." or "Feeding..." is displayed.
    To cut off the label, push in the tape cutter lever on the upper-
    right corner of the machine.
    Peel the printed label from the backing and apply the label.
    You can print up to 9 copies of each label.
    X Setting Margin
    [Full]/[Half]/[Narrow]
    For leaving equal margins on both sides of the text.
    [Chain Print]
    For creating a label containing text in various styles.
    1. Enter text.
    2. Press , then [Copies: ] appears.
    3. Press / or enter number with number keys to
    select the number of copies.
    4. Press . Printing will start, and then the message "OK
    to Feed?" appears.
    5. Press to enter more text.
    6. Clear the text, enter the text for the next label, and then
    press .
    7. When the message "OK to Feed?" appears after the last
    label is printed, press .
    8. After the tape is fed, press the cutter lever to cut off the
    chain of labels.
    NOTE
    When [Half] or [Narrow] is set, the displayed label length is the
    length from the printed dots ( ) to the end of the label.
    To print more than 1 copy of a label with minimum margin, set
    the margin to [Narrow].
    When [Chain Print] is set, feed the tape before using the cutter
    otherwise a part of the text may be cut off. Also, cut along the
    printed dots ( ) with scissors so the text is centered in the label.
    *Feed the tape before using the cutter.
    Do not pull the tape since this may damage the tape cassette.
    You can save up to 9 labels and recall them for printing at a later
    date. A maximum of 80 characters can be saved per file, a
    maximum total of 720 characters for the total memory. You can
    also edit and overwrite the stored label.
    X Print
    X Save
    X Open
    NOTE
    If you try to store a label when there is already a label stored to that
    number, a message “Overwrite?” will appear. Press to save
    your new label. Press to cancel.
    If the cutter blade becomes dull after repetitive use and the tape cannot
    be cut cleanly, replace with a new cutter (stock no. TC-4). You may
    obtain this item from an authorized Brother reseller.
    X Replacing the Cutter Unit
    1. Pull out the two sections of the cutter unit (green) in the
    direction of the arrows shown in the illustration.
    2. Install a new cutter unit. Push it in until it snaps into place.
    You can reset the P-touch labeler when you want to initialize the
    settings, or in the event the P-touch labeler is not working properly.
    1
    Turn off the P-touch labeler, hold down and
    and then press to turn the P-touch back on.
    2 Release and .
    The P-touch labeler turns on with the internal memory reset.
    NOTE
    All text, settings and stored files are cleared.
    Entering Text
    LCD display Label image
    / [Text&Format]
    / [Text Only]
    - / /
    Aa
    CDc d
    Ee
    GIg i
    KLk l
    NRn r
    Oo
    STs t
    Uu
    YZy z
    / [Label Length]
    / [Auto/1.2"-12.0" (30-300 mm)]
    Printing Labels
    / [Preview]
    / [Feed]
    [Copies: 1] / / -
    / [Margin]
    / [Full/Half/Narrow/Chain Print]
    LCD display Label image
    Full
    Half
    Narrow
    1"
    0.16"0.16"
    1"
    ABC ABC
    0.47" 0.47"
    (4 mm)
    (25 mm)
    (12 mm)
    ABC
    Full
    Half
    Narrow
    2.7"
    (67 mm)
    ABC
    1.6"
    (41 mm)
    ABC
    1"
    (25 mm)
    ABC
    Saving Label Files
    / [File] / [Print]
    /
    [Copies: ] / -
    / [File] / [Save]
    /
    / [File] / [Open]
    /
    Accessories
    Tape Cassettes: See the included “Supplies and
    Accessories Guide”.
    Cutter Unit: TC-4 (replacement)
    Do not touch the cutter blade directly with your fingers.
    Resetting the P-touch
    Declaration of Conformity
    (Europe/Turkey only)
    We, BROTHER INDUSTRIES, LTD
    15-1, Naeshiro-cho, Mizuho-ku,
    Nagoya, 467-8561, Japan
    declare that this product is in compliance with the essential
    requirements and other relevant provisions of Directives
    2004/108/EC.
    The Declaration of Conformity (DoC) is on our Web site.
    Please go to http://solutions.brother.com -> choose region
    (eg. Europe) -> choose country -> choose your model ->
    choose “Manuals”-> choose Declaration of Conformity
    (*Select Language when required).
    USING TEMPLATES
    The designed labels shown below are preset in the machine.
    Using these templates, you can create decorative labels easily by
    inputting text.
    Example:
    If [Surprise!] is selected, a frame, style and pictographs are selected randomly.
    This function allows you to create unique labels by using built-in templates.
    Example:
    NOTE
    Depending on the format you have selected, the entire contents of your text may
    not be printed. For example, if you selected a fixed Label Length and the text is too
    long, the "Text Limit!" error message will appear. (Only for DECO MODE function)
    The template designs cannot be edited.
    Only the highlighted symbols in “Symbol Key” can be used in DECO MODE.
    To clear all text, press , and “Clear?” appears. Press to clear. Press
    to cancel.
    When you access DECO MODE or Auto Designs, your most recently printed
    DECO MODE or Auto Designs text and label length will be recalled.
    Press to return to the previous step.
    To exit DECO MODE or Auto Designs and return to the text input screen, press
    / to select [Cancel], and then press when [Print] is displayed.
    The DECO MODE features are only available when using 0.47" (12mm) tape
    cassettes.
    The maximum label length is 7.8" (200mm) for the DECO MODE.
    When [Surprise!] is selected in the Auto Designs function, label length will not be
    displayed in the text input screen.
    When [Auto] is selected for “Label Length”, the label will automatically adjust to the
    correct length for the text.
    Press to return to the [Auto] setting for “Label Length” mode.
    Press to select the frame design.
    NOTE
    Frames cannot be printed on 0.13" (3.5mm) tape.
    NOTE
    With the Cable Label function, [Auto] is automatically selected for
    the label length and [Full] for the margins.
    USEFUL FUNCTION KEYS
    1 Press or or + to select the
    settings to enter the text.
    2 Press / to select the settings.
    Press to select various symbols.
    To enter Basic symbols :
    Only the highlighted symbols can be used in DECO MODE.
    To enter Pictograph symbols :
    The selected symbol is displayed as "A1" in the text input screen.
    For example, a car is displayed as in the screen.
    To print all pictographs :
    NOTE
    Press to return to the previous step.
    Auto Designs
    [Category] / [Pets]
    [Input text] Rusty's Food [Print]
    Congrats Sports
    People Fashion
    Pets Flower
    Kitchen Space
    Business Surprise!
    DECO MODE
    / [Deco mode]
    [Design X] (X:1-12)
    [Input Text] ABCDEF
    [Label Length] / [Auto/1.2"-7.8"(30-200mm)]
    [Print]
    17
    28
    39
    410
    511
    612
    Frame Key
    / Select a frame
    2
    47
    58
    369
    Cable Label
    This function allows you to create cable labels
    as below with 2 lines of text wrapping around
    cable. We recommend using Brother Flexible
    ID tape when wrapping.
    Refer to the insertion sheet included with
    Flexible ID tape about the recommended
    conditions for use.
    [Input text] ABC 159 / [Cable]
    [Print OK?] [Copies: 1] / / -
    ABC
    159
    ABC
    159
    Text Keys / / +
    or or + / Select an item
    Size
    Large
    Medium
    Small
    Style
    Normal
    Bold
    Outline
    Shadow
    Italic
    I+Bold
    I+Outline
    I+Shadow
    Vertical
    Width
    +
    Normal
    × 2
    × 1/2
    Short Cut Keys
    Width
    Label Length
    Margin
    File
    Cable
    Deco mode
    Preview
    Feed
    Unit
    Language
    Symbol Key
    / [Basic] / Choose a symbol
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    / [Pictograph] / Select category
    / Choose a symbol
    123456789
    A
    B
    C
    D
    E
    F
    G
    H
    I
    J
    K
    L
    / [Print List] [Print OK?]
    With your PT-H100, you can create labels for multiple
    applications. Select from the many frames, character sizes and
    styles to design beautiful custom labels. In addition, the variety
    of tape cassette available allows you to print labels with different
    widths and exciting colors.
    Read this manual carefully before you begin and keep the
    manual in a handy place for future reference.
    Printed in China
    LAA204001
    English
    Español
    User’s Guide
    *
    1
    Visit us at http://solutions.brother.com/ for the latest
    information about the recommended batteries.
    Specifications
    Dimensions:
    (W x D x H)
    Approx. 4.4" × 8.2" × 2.4"
    (Approx.110(W) × 208(D) × 59(H)mm)
    Weight: Approx. 0.9 lb. (Approx. 390 g)
    (without batteries and tape cassette)
    Power supply: Six AAA alkaline batteries (LR03)
    Six AAA Ni-MH batteries (HR03)*
    1
    Tape cassette: Brother TZe tape (width)
    0.13" (3.5mm), 0.23" (6mm),
    0.35" (9mm), 0.47" (12mm)
    Should you encounter any problems with your product,
    please do not return your product to the store!
    After referring to the User's guide, if you still need
    assistance, call Brother Customer Service at:
    Voice: 1-877-BROTHER
    Web: www.brother-usa.com
    Fax: 1-901-379-1210
    If you need to locate a service center, please call
    1-877-BROTHER or visit us at www.brother-usa.com
Brother PT-H100

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Brother PT-H100 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Brother PT-H100 rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Brother PT-H100. Il manuale rientra nella categoria Macchina etichettatrice ed è stato valutato da 1 persone con una media di 8.2. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Brother PT-H100 o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Brother PT-H100

Generale
Marca Brother
Modello PT-H100
Prodotto Macchine etichettatrici
EAN 12502632962, 4977766722582, 650791015556
Lingua Inglese
Tipo di file PDF
Velocità di stampa
Risoluzione massima 180 x 180
Tecnologia di stampa Trasferimento termico
A colori
Velocità di stampa 20
Colori di stampa Nero
Stampa verticale
peso massimo di stampa 9
Connettività
Collegamento ethernet LAN
Wi-Fi
Connesso al PC
Altre caratteristiche
Rete pronta
Memoria etichetta 9
Tasti di navigazione
Dimensioni e peso
Larghezza 109.2
Profondità 58.42
Altezza 208.3
Peso 408.2
Gestione energetica
Numero di batterie 6
Tipo batteria Mini Stilo AAA
Tecnologia batteria Alcali✗
Certificazione Energy Star -
Contenuto dell'imballo
Batterie incluse
Design
Tipologia display LCD
Colore del prodotto Grey, White
Prestazione
Numero di stili 9
Numero di fonts 1
Numero massimo di linee 2
Tipo nastro TZe

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Brother PT-H100 .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più