Cateye Strada RD300

Cateye Strada RD300 manuale

(1)
  • 5
    8
    7
    2
    3
    1
    6
    4
    Tire circumference
    reference table
    12 x 1.75
    14 x 1.50
    14 x 1.75
    16 x 1.50
    16 x 1.75
    18 x 1.50
    18 x 1.75
    20 x 1.75
    20 x 1-3/8
    22 x 1-3/8
    22 x 1-1/2
    24 x 1
    24 x 3/4
    Tubular
    24 x 1-1/8
    24 x 1-1/4
    24 x 1.75
    24 x 2.00
    24 x 2.125
    26 x 7/8
    26 x 1
    (
    59
    )
    26 x 1
    (
    65
    )
    26 x 1.25
    26 x 1-1/8
    26 x 1-3/8
    26 x 1-1/2
    26 x 1.40
    26 x 1.50
    26 x 1.75
    26 x 1.95
    26 x 2.00
    26 x 2.10
    26 x 2.125
    26 x 2.35
    26 x 3.00
    27 x 1
    27 x 1-1/8
    27 x 1-1/4
    27 x 1-3/8
    650 x 20C
    650 x 23C
    650 x 35A
    650 x 38A
    650 x 38B
    700 x 18C
    700 x 19C
    700 x 20C
    700 x 23C
    700 x 25C
    700 x 28C
    700 x 30C
    700 x 32C
    700C Tubular
    700 x 35C
    700 x 38C
    700 x 40C
    29 x 2.1
    29 x 2.3
    935
    1020
    1055
    1185
    1195
    1340
    1350
    1515
    1615
    1770
    1785
    1753
    1785
    1795
    1905
    1890
    1925
    1965
    1920
    1913
    1952
    1953
    1970
    2068
    2100
    2005
    2010
    2023
    2050
    2055
    2068
    2070
    2083
    2170
    2145
    2155
    2161
    2169
    1938
    1944
    2090
    2125
    2105
    2070
    2080
    2086
    2096
    2105
    2136
    2146
    2155
    2130
    2168
    2180
    2200
    2288
    2326
    Tire size L (mm)
    CATEYE STRADA WIRELESS
    CYCLOCOMPUTER CC-RD300W
    U.S. Pat. Nos. 5236759/6957926 Pat./Design Pat. Pending
    Copyright© 2011 CATEYE Co., Ltd.
    CCRD3W-110930 066600542 6
    L mm
    SEN
    SOR
    ZONE
    5
    4
    5 mm
    5 mm
    5 mm
    S
    EN
    S
    O
    R
    ZO
    N
    E
    4
    5
    Install the sensor and magnet
    Sensor zone
    Inside of right front fork
    Max
    70 cm
    YES! NO!
    A
    The distance between the computer
    and the sensor must not exceed the
    transmission range of 70 cm. The back
    of the computer must face the sensor.
    B
    The magnet
    must pass
    through the
    sensor zone.
    C
    The clearance
    between the
    sensor surface
    and the magnet
    must not
    exceed 5 mm.
    5
    SENSOR
    ZONE
    4
    6
    8
    SENSOR
    ZONE
    3
    4
    1
    2
    Click
    1
    2
    2
    1
    7
    7
    3
    2
    *
    For wing type handlebar or oversized
    stem, bracket can be mounted using
    the Bracket Holder and nylon ties.
    (Option)
    Caution:
    Make sure that the back of the computer faces the sensor.
    * The computer may not function appropriately on some
    stem if its back does not face the sensor as shown in
    A
    .
    When attaching the bracket to the stem
    Spoke
    Toward the
    sensor zone
    Install the magnet
    While supporting it by hand,
    Handlebar
    Cut
    Attach the bracket to the stem or handlebar
    Remove/install the
    computer
    Caution:
    Round off the cut edge
    of the bracket band to
    prevent injury.
    Install the sensor
    Inside of right front fork
    * After installation, rotate the front wheel gently to check that the speed is displayed on the
    computer. If the speed is not displayed, check that conditions
    A
    ,
    B
    , and
    C
    , above, have
    been done appropriately.
    Stem
    Pull
    securely
    * Install the sensor as close to the upper
    part of the front fork as possible.
    push it out as if lifting the front up
    When attaching the bracket to the handlebar
    How to install the unit on your bicycle
    1 Bracket band
    2 Bracket
    3
    Nut
    4 Speed sensor
    5 Magnet
    6 Sensor rubber pad
    7 Bracket rubber pad
    8 Nylon ties (x2)
    ENG
    Before using the computer, please thoroughly read this manual and keep it for
    future reference.
    WARNING / CAUTION
    Do not concentrate on the computer while riding. Ride safely!
    Install the magnet, sensor, and bracket securely. Check these periodically.
    If a child swallows a battery, consult a doctor immediately.
    Do not leave the computer in direct sunlight for unnecessary or extended periods.
    Do not disassemble the computer.
    Do not drop the computer. Doing so may result in a computer malfunction or damage.
    When using the computer installed on the bracket, change the MODE by pressing on the three dots
    below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.
    Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracket
    threads.
    When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.
    Dispose of used batteries according to local regulations.
    LCD screen may be distorted when viewed through polarized sunglass lenses.
    Wireless Sensor
    The sensor was designed to receive signals within a maximum range of 70 cm, to reduce chance of
    interference.
    When adjusting the wireless sensor, note the following:
    Signals cannot be received if the distance between the sensor and the computer is too great.
    The transmission distance may be shorter due to low temperature or low battery.
    Signals can be received only when the back of the computer is facing the sensor.
    Interference may occur, resulting in incorrect data, if the computer is:
    Near a TV, PC, radio, motor, or in a car or train.
    Close to a railroad crossing, railway tracks, TV stations and/or radar base.
    Using with other wireless devices in close proximity.
    This device complies with Part 15 of the FCC Rules.Operation is subject to the following
    two conditions:(1)This device may not cause harmful interference,and (2)this device
    must accept any interference received,including interference that may cause undesired
    operation.
    Modifications The FCC requires the user to be notified that any changes or modifications
    made to this device that are not expressly approved by CatEye Co.,Ltd.May void the user
    s authority to operate the equipment.
    AC
    MENU
    MODE
    MENUMENU
    MODEMODE
    MENU
    MENU
    MENU
    MODEMODE
    MODE
    MODE
    MODE
    MODE
    MODE
    MODE
    MENUMENU
    MODEMODE
    AC
    1
    2
    3
    4
    km/h mph
    Increase
    Move digits
    (by pressing
    & holding)
    Register the
    setting
    Register
    the setting
    Clear all data (initialization)
    Press the AC button on the back.
    Select the desired speed units
    Select “ ” or “ ”.
    Enter the tire circumference
    Enter the tire circumference of your bicycle in mm.
    * Refer to the tire circumference reference table.
    Set the clock
    When MODE is pressed and held, “Displayed
    time”, “Hour”, and “Minute” will appear, in
    this order.
    24h 12h,
    or increase
    the value
    Switch the
    screen or
    move digits
    (by pressing
    & holding)
    Preparing the computer
    Battery case cover
    Push!
    When the computer is
    mounted on the bracket
    : Speed unit
    : Wheel size icon
    : Sensor signal reception icon
    Measure wheel circumference
    (L) of your bike
    To get the most accurate
    calibration do a wheel roll out.
    With the valve stem
    perpendicular to the ground,
    mark the pavement at the valve
    stem. With the riders weight on
    the bike, roll the wheel one tire
    revolution in a straight line and
    mark the ground when the
    valve stem is perpendicular to
    the ground again. Measure the
    distance in millimeters. This is
    the most accurate wheel
    calibration number.
Cateye Strada RD300

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Cateye Strada RD300 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Cateye Strada RD300 rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Cateye Strada RD300. Il manuale rientra nella categoria Ciclocomputer ed è stato valutato da 1 persone con una media di 7.7. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Cateye Strada RD300 o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Cateye Strada RD300

Generale
Marca Cateye
Modello Strada RD300
Prodotto Ciclocomputer
EAN 4990173017577, 4990173021000
Lingua Inglese
Tipo di file PDF

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Cateye Strada RD300 .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più