Comar AIS-2-USB manuale

  • Numero di pagine: 2
  • Tipo di file: PDF


The AIS-2-USB Receiver is not waterproof and should be
mounted in a dry location. The unit can be fixed by the 4
mounting holes in the end flanges.
It will require connection to a marine VHF antenna via the
BNC socket at the rear or with a BNC to VHF adaptor socket.
Connect the Receiver to your computer via the supplied USB
cable. Switch on the computer and load the Drivers as
detailed on the CD. This will create a Virtual Com Port that
will enable the AIS data sent via USB to be displayed on
a compatible AIS computer program.
The output Baud rate is set to 38,400, if you wish to change
this to 4800 baud, disconnect the power, unscrew the two
screws to release the front cover and move the jumper
located in the middle to the 4800 position.


On applying power the Green LED will light and the two
Channel Red LEDs will come on continuously for
approximately 10 seconds then extinguish. If you are within
range of vessels transmitting AIS data the two channels Red
LEDs will flash intermittently indicating reception of a AIS
messages which will be sent as NMEA data via the USB
connection to the computer.

Limited Warranty:

Comar Systems Ltd warrants this product to be free from
defects in materials and manufacture for one year from the date
of purchase. Comar Systems Ltd will, at its sole option, repair or
replace any components that fail in normal use. Such repairs or
replacement will be made at no charge to the customer for parts
and labour. The customer is, however, responsible for any
transportation costs incurred in returning the unit to Comar
Systems Ltd.
This warranty does not cover failures due to abuse, misuse,
accident or unauthorized alteration or repairs.
The above does not effect the statutory rights of the consumer.

Note: Every effort has been made to ensure that all information

contained in this manual is accurate at the time of going to

press. However AIS is a new technology and the legislation is

subject to change. We therefore cannot take any responsibility

for the content of this manual and advise that you take normal

steps to ensure that the information is at its most current when

you are reading this manual.

Product Support

Comar Systems Limited
Unit 7, Medina Court
Arctic Road
Isle of Wight, PO31 7XD
United Kingdom
Telephone: +44 (0) 1983 282400 Fax: +44 (0)1983 280402
Internet: |

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Comar AIS-2-USB o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Comar AIS-2-USB rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Comar AIS-2-USB. Il manuale rientra nella categoria Non classificato ed è stato valutato da 1 persone con una media di 5.4. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Comar AIS-2-USB o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Comar AIS-2-USB

Marca Comar
Modello AIS-2-USB
Prodotto Non classificato
Lingua Inglese
Tipo di file PDF

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Comar AIS-2-USB .

La tua domanda non è elencata? Fai la tua domanda qui