DeWalt DW304PK

DeWalt DW304PK manuale

(1)
  • General Power Tool Safety Warnings
    WARNING! Read all safety warnings and all instructions. Failure to follow the warnings
    and instructions may result in electric shock, fire and/or serious injury.
    Save all warnings and instructions for future reference.
    The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
    battery-operated (cordless) power tool.
    1) Work area safety
    a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
    b) Do not operate power tools in explosive atmospheres, such as in the presence of
    flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
    c) Keep children and bystanders away while operating a power tool. Distractions can cause
    you to lose control.
    2) Electrical safety
    a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
    adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
    reduce risk of electric shock.
    b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
    and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
    c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
    increase the risk of electric shock.
    d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
    tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
    increase the risk of electric shock.
    e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
    Use of a cord suitable for outdoor use reduces the risk of electric shock.
    f) If operating a power tool in a damp location is unavoidable, use a residual current device
    (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
    NOTE: The term “residual current device (RCD)” may be replaced by the term “ground fault circuit
    interrupter (GFCI)” or “earth leakage circuit breaker (ELCB)”.
    3) Personal safety
    a) Stay alert, watch what you are doing and use common sense when operating a power
    tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
    medication. A moment of inattention while operating power tools may result in serious personal
    injury.
    b) Use personal protective equipment. Always wear eye protection. Protective equipment such
    as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions
    will reduce personal injuries.
    c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting
    to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
    your finger on the switch or energising power tools that have the switch on invites accidents.
    d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
    left attached to a rotating part of the power tool may result in personal injury.
    e) Do not overreach. Keep proper footing and balance at all times. This enables better control
    of the power tool in unexpected situations.
    f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
    gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
    parts.
    g) If devices are provided for the connection of dust extraction and collection facilities,
    ensure these are connected and properly used. Use of dust collection can reduce dust-related
    hazards.
    4) Power tool use and care
    a) Do not force the power tool. Use the correct power tool for your application. The correct
    power tool will do the job better and safer at the rate for which it was designed.
    b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
    cannot be controlled with the switch is dangerous and must be repaired.
    c) Disconnect the plug from the power source and/or the battery pack from the power tool
    before making any adjustments, changing accessories, or storing power tools. Such
    preventive safety measures reduce the risk of starting the power tool accidentally.
    d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
    with the power tool or these instructions to operate the power tool. Power tools are dangerous
    in the hands of untrained users.
    e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
    parts and any other condition that may affect the power tool’s operation. If damaged, have
    the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
    f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
    are less likely to bind and are easier to control.
    g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
    taking into account the working conditions and the work to be performed. Use of the power
    tool for operations different from those intended could result in a hazardous situation.
    5) Service
    a) Have your power tool serviced by a qualified repair person using only identical replace-
    ment parts. This will ensure that the safety of the power tool is maintained.
    DW304PK
    (MAR10) Part No. N055726 Copyright @ 2008, 2010
DeWalt DW304PK

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul DeWalt DW304PK o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di DeWalt DW304PK rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il DeWalt DW304PK. Il manuale rientra nella categoria Sega ed è stato valutato da 1 persone con una media di 9.7. Il manuale è disponibile nelle seguenti lingue: Inglese, Cinese. Hai domande sul DeWalt DW304PK o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche DeWalt DW304PK

Generale
Marca DeWalt
Modello DW304PK
Prodotto Seghe
EAN 5035048943366
Lingua Inglese, Cinese
Tipo di file PDF
Gestione energetica
Potenza ingresso 1050
Alimentazione AC
Potenza ingresso 1050
Alimentazione AC
Caratteristiche
Applicazioni multi-strumento Tagliare
Colore del prodotto Black, Yellow
Colore del prodotto Black, Yellow
Prestazione
Velocità di oscillazione a vuoto (max.) 2800
Dimensioni e peso
Profondità 435
Altezza 178
Peso 3500
Profondità 435
Altezza 178
Peso 3500

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo DeWalt DW304PK .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più