Electrolux PD91-8SSM

Electrolux PD91-8SSM manuale

(1)
  • 1 32 4
    2www.electrolux.com
    13 14
    17
    16 18
    5 876
    9
    1211
    2625
    19 20
    22
    21
    15
    10
    23
    24
    3www.electrolux.com
    ENGLISH
    Thank you for choosing Electrolux PURED9 vacuum cleaner. Always
    use original accessories and spare parts to get the best results. This
    product is designed with the environment in mind. All plastic parts are
    marked for recycling purposes.
    BEFORE STARTING
    • Read this manual carefully.
    • Check that all parts described are included.
    • Pay special attention to the safety precautions!
    DESCRIPTION OF PURED9 VACUUM CLEANER
    A. Display (see versions later)
    B. Exhaust lter lid
    C. Exhaust lter
    D. Parking slots
    E. Power cord
    F. Motor lter
    G. Motor lter holder
    H. S-bag®
    I. S-bag® holder
    J. Dust compartment cover
    K. AeroPro 3in1 tool
    L. AeroPro hose
    M. AeroPro handle (see versions
    later)
    N. AeroPro telescopic tube
    O. Parking clip
    P. Display for models with rotary
    knob manual control*
    Q. Display for models with remote
    control*
    R. Display for models with remote
    control and AUTO function*
    S. AeroPro Classic handle*
    T. AeroPro Ergo handle*
    U. AeroPro Remote Control
    handle*
    V. AeroPro FlowMotion nozzle*
    W. AeroPro PureVision nozzle
    (with front lights)*
    X. AeroPro Turbo nozzle*
    Y. AeroPro Mini Turbo nozzle*
    Z. ParkettoPro nozzle*
    AA. AeroPro FlexProPlus nozzle*
    AB. AeroPro Long crevice nozzle*
    * Certain models only
    HOW TO USE THE VACUUM CLEANER
    1 Open the dust compartment cover by pulling the S-BAG button. Check
    that the dust bag (s-bag) is in place.
    2 Insert the hose into the cleaner (to remove it, press the lock buttons
    and pull). Insert the hose into the hose handle until the lock button
    clicks (to release it, press the lock button
    and pull).
    3 Attach the telescopic tube to the nozzle. Attach the telescopic tube to
    the hose handle (to remove it, press the lock button and pull).
    4 Adjust the telescopic tube by holding the lock with one hand and
    pulling the handle with the other hand.
    START/STOP THE VACUUM CLEANER AND ADJUST SUCTION POWER
    5 Pull out the power cord and plug it into the mains. Press the ON/
    OFF button to turn the cleaner on/o. Indicators light up, MIN/MAX
    indicator lights up from left to right and back (auto function models).*
    Models with remote control can also be operated by the ON/OFF
    button on the handle.*
    6 Adjust suction power (manual control models): Turn the rotary knob on
    the cleaner or use the air valve on the handle.*
    7 Adjust suction power (remote control models): Press +/- button on the
    handle. MIN/MAX and symbols indicators on display will show level of
    power.*
    8 Adjust suction power (remote control models with AUTO): The cleaner
    starts in AUTO mode (automatic power regulation). AUTO indicator is
    illuminated on the display and MIN/MAX indicator pulses. To regulate
    power manually press +/- button on handle. Press AUTO button to
    return to auto-function.*
    9 After cleaning, push the REWIND button to rewind the cable.
    PARKING POSITIONS
    10 Use parking position on the side (A) or underneath (C) to carry and
    store the cleaner. At the back (B) when you pause (save your back).
    REPLACING THE DUSTBAG, SBA
    11 Replace the s-bag when
    - P* Models with rotary knob: S-BAG indicator lights up in red
    - Q* Models with remote control: S-BAG symbol lights up red.
    - R* Models with remote control and AUTO: S-BAG indicator lights up
    in red (green light: bag is OK, yellow light: soon time to replace bag).
    NB: Always change the s-bag when S-BAG indicator is illuminated or
    has red light even if the s-bag is not full (it may be blocked) and after
    using carpet cleaning powder. For best possible performance, use the
    Ultra Long Performance bag which is especially developed for your
    cleaner. Other synthetic s-bags can also be used. Do not use paper dust
    bags! www.s-bag.com
    12 Pull the S-BAG button to open the dust compartment. The handle of
    the s-bag holder goes up. Pull the handle to remove the s-bag with
    holder. Do not press the release button.
    13 Hold the s-bag with holder over a dust bin. Press the button to release
    the s-bag. Insert a new s-bag to the holder by inserting the cardboard
    at the back of the holder.
    14 Insert the s-bag with holder by pushing it straight down in its tracks.
    Make sure the s-bag is not stuck under the holder. Close the lid. If the
    s-bag is not properly placed or is missing, the lid will not close.
    NB: When you start the cleaner after s-bag replacement, It takes 10
    seconds before the S-BAG indicator turns o (P* Models with rotary
    knob and Q* Models with remote control) or turns green (R* Models
    with remote control and AUTO).
    REPLACING THE FILTERS
    15 Replace/clean** the lter when (**washable lter only)
    - P* Models with rotary knob: you have changed the s-bag 5 times
    - Q* Models with remote control: FILTER symbol lights up in red
    - R* Models with remote control and AUTO: lter indicator lights up
    in red. Green light indicates that the lter is ok. It lights up briey when
    you start the vacuum cleaner.
    16 Pull the FILTER button to open the lter lid. Use original s-lters.
    Remove the lter and check the reference on the frame to dene type.
    Replace with a new lter or clean it**. Rinse the inside (dirty side) in
    lukewarm tap water. Tap the lter frame to remove the water. Repeat
    the process four times. (*
    *washable lter only)
    NB: Do not use cleaning agents. Avoid touching the lter surface.
    Let the lter dry completely (min. 24 h in room temperature) before
    putting back ! Change the washable lter at least once a year or when it
    is very dirty or damaged. Do not remove the L-shaped foam under the
    lter.
    17 After replacing the lter, close the lter lid until it is clicked back into
    place. If the lter lid comes o, position the hinges at the bottom and
    push the lter lid until it is clicked back into place.
    NB: When you start the cleaner after lter replacement, It takes 10
    seconds before the FILTER indicator turns green (models with remote
    control and AUTO function) or turns o (remote control models).*
    18 Replace the motor lter when dirty or after every 5th s-bag. Push the
    lter holder down and pull it out. Exchange the lter and close the lid.
    VACUUMING WITH THE UNIVERSAL NOZZLE V*, W*
    19 Change nozzle setting with the pedal. Icon illustrates recommended
    oor type.
    20 PureVision nozzle*: Move the nozzle forward. The front light turns on
    automatically after a few seconds. When the nozzle is not used, the
    light turns o automatically after a few seconds.
    CLEANING THE UNIVERSAL NOZZLE V*, W**
    21 Disconnect the nozzle from the tube. Clean with the hose handle.
    CLEANING THE TURBO NOZZLE X*
    22 Disconnect the nozzle from the tube and remove entangled threads etc
    by snipping them away with scissors. Use the hose handle to clean the
    nozzle. *
    3IN1 ACCESSORY TOOL
    23 Pull the textile tab to take out 3in1 tool. The tool has 3functions, see
    pictures on next page.
    24 After usage, put it back in its place.
    2www.electrolux.com
    GB
    FR
    AR
    BG
    GR
    NO
    CZ
    HR
    PL
    DE
    HU
    PT
    DK
    IT
    RO
    EE
    LT
    RU
    ES
    LV
    SE
    SL
    FI
    NL
    SK
    SR
    TR
    UA
Electrolux PD91-8SSM

Vuoi sapere di Electrolux PD91-8SSM?

manual_questions_numberofquestions 0

Chiedi la domanda che hai sul Electrolux PD91-8SSM semplimente ad altri proprietari di prodotto qui. Assicurati di fornire una descrizione chiara ed asauriente del problema e della tua domanda. Migliore è la descrizione del tuo problema e della domanda, più facile è per gli altri proprietari del Electrolux PD91-8SSM fornirti una buona risposta.

Visualizza qui il manuale gratuito del Electrolux PD91-8SSM. Hai letto il manuale, ma risponde alla tua domanda? Quindi fai la tua domanda su questa pagina ad altri proprietari del Electrolux PD91-8SSM

Specifiche

Marca Electrolux
Modello PD91-8SSM
Prodotto Aspirapolvere
EAN 7332543568826
Lingua Italiano, Olandese, Rumeno, Arabo, Ucraino, Croato, Sloveno, Ungherese, Greco, Slovacco, Turco, Norvegese, Finlandese, Inglese, Russo, Polacco, Danese, Portoghese, Svedese, Spagnolo, Francese, Tedesco, Bulgaro
Tipo di file PDF

Relaterade produkter

Aspirapolvere Electrolux

manual_faq_title

manual_faq_description

manual_faq_add-manual manual_question_cta

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più