Freestyle Predator FS84997

Freestyle Predator FS84997 manuale

  • ENGLISH
    SHARK PREDATOR
    S1S4
    S5
    S2S3
    S1. Start/stop Button
    S2. Lap/reset Button
    S3. Mode Button
    S4. Light Button
    S5. Lap/reset Button
    DISPLAY MODES:
    The watch has seven display modes:
    HOME TIME, FOREIGN TIME (T2),
    ALARM 1 (AL1), ALARM2 (AL2),
    CHRONOGRAPH (CHR), PACER and
    TIMER (TMR).
    To change from one display mode to
    another, press S3 button once.
    NOTE: In any setting mode, if there is
    no manipulation for around 2 minutes,
    the watch will automatically save
    the entered data and exit the setting
    procedure.
    TO SET THE TIME AND CALENDAR:
    1. Press S3 button to select HOME
    TIME mode.
    2. Press and hold S2 button for
    around 3 seconds, the second digits
    will blink.
    3. Press S1 button to reset the second
    digits to 00. This will increase the
    time by 1 minute of the original
    setting is at 30 to 59 seconds.
    4. Press S3 button, the minute digits
    will blink.
    5. Press S1 button to set the minute
    digits. Holding down the button will
    speed up the process.
    6. Press S3 button, the hour digits will
    blink.
    7. Press S1 button to set the hour
    digits. Holding down the button will
    speed up the process.
    8. Follow the same pattern to set day
    (of the week), year, month and date.
    9. After nished making all the set-
    tings, press S2 button to conrm.
    NOTE: The year can be set within the
    range of 2000 to 2099.
    TO SET THE FOREIGN TIME:
    1. Press S3 button to select FOREIGN
    TIME mode.
    2. Press and hold S2 button for
    around 3 second. The hour digits
    will blink.
    3. Press S1 button to set the hour
    digits. Holding down the button will
    speed up the process.
    4. After nished making all the set-
    tings, press S2 button to conrm.
    NOTE: In FOREIGN TIME settings,
    only hour digits are open to setting.
    The minutes and seconds counts are
    synchronized between HOME TIME and
    FOREIGN TIME mode.
    TO SET THE HOUR FORMAT:
    In HOME TIME mode, press S2 button
    to toggle between 12-hour and 24-hour
    format. The A.M. and P.M. indicators
    will be displayed in 12-hour format.
    NOTE: The chosen hour format will
    apply to both HOME TIME mode and
    FOREIGN TIME mode.
    TO TURN ON/OFF THE HOURLY
    CHIME:
    In HOME TIME mode,
    1. Press S1 button to activate or
    deactivate the hourly chime func-
    tion.
    2. When the hourly chime function is
    activated, the hourly chime indica-
    tor
    will appear.
    TO SET THE DAILY ALARMS:
    1. Press S3 button to select ALARM1
    or ALARM2 mode to set.
    2. Press and hold S2 button for around
    3 seconds, the minute digits will
    blink.
    3. Press S1 button to set the minute
    digits. Holding down the button will
    speed up the process.
    4. Press S3 button, the hour digits will
    blink.
    5. Press S1 button to set the hour
    digits. Holding down the button will
    speed up the process.
    6. After nished making all the set-
    tings, press S2 button to conrm.
    TO TURN ON/OFF THE DAILY ALARMS:
    In ALARM1 or ALARM2 mode,
    1. Press S1 button to activate or
    deactivate the alarm function.
    2. While the alarm function is
    activated, the alarm indicator
    / will appear.
    WHEN AN ALARM GOES OFF:
    An alarm tune will be emitted at the
    designated time when the alarm is
    activated. To stop the tune, press any
    button.
    TO USE THE CHRONOGRAPH:
    Press S3 button to select CHRONO-
    GRAPH mode.
    1. The chronograph will then be
    displayed in its current state –
    reset, running, or stopped.
    2. To resume a counting, press S1
    button to resume from where it left
    off.
    3. To start a new counting, reset the
    stop watch to zero rst.
    4. Press S1 button to stop count-
    ing, then press S2 button to reset
    the counter to zero.
    For the measurement of elapsed time:
    In CHRONOGRAPH mode,
    1. Press S1 button to start counting.
    To stop counting, press S1 button.
    2. Press S1 button again to resume
    from where it left off.
    3. To reset to zero, press S1 button to
    stop counting and then press S2
    button.
    For the measurement of split time:
    In CHRONOGRAPH mode,
    1. Press S1 button to start counting.
    2. While the chronograph is running,
    press S2/S5 button to register a lap.
    The chronograph is still running in
    the background.
    After around 8 seconds, the
    currently accumulated time will be
    displayed.
    3. Repeat the last step until all the
    laps have been registered.
    4. To stop counting, press S1 button.
    Press S1 button again to resume
    from where it left off.
    5. To reset to zero, press S1 button to
    stop counting, then press S2 button
    to reset the counter to zero.
    NOTE: The chronograph can record
    up to a maximum of 10 laps. If you try
    to record more than 10 laps, the lap
    number will show a ashing “F” and
    the extra laps will not be recorded.
    NOTE: You can leave the chronograph
    running while switching over to other
    operating modes.
    NOTE: The chronograph will count up
    to 9 hours, 59 minutes and 59.99 sec-
    onds before starting from zero again.
    TO USE THE RECALL FUNCTION:
    1. Press S3 button to select RECALL
    mode.
    2. Press S1 button to scroll through
    the recorded individual lap and split
    time.
    NOTE: The recall function is available
    only when there is lap record stored.
    NOTE: The previous set of lap record
    will automatically be replaced by the
    next set of lap record.
    TO USE THE PACER:
    1. Press S3 button to select PACER
    mode.
    2. The pacer frequency will be dis
    played above the home time.
    3. Press S2 button to cycle among the
    pre-set values 40, 45, 50, 55, 60, 65,
    70, 75, 80, 85, 90, 95, 100, 110,
    120, 130, 140, 150 and 160 beeps
    per minute.
    4. After nished making all the
    settings, press S1 button to start
    the pacer.
    5. To stop the pacer, press S1 button
    again.
    TO SET THE TIMER:
    1. Press S3 button to select TIMER
    mode.
    2. Press and hold S2 button, the
    second digits will blink.
    3. Press S1 button to set the second
    digits. Holding down the button will
    speed up the process.
    4. Press S3 button, the minute digits
    will blink.
    5. Press S1 button to set the minute
    digits. Holding down the button will
    speed up the process.
    6. Press S3 button, the hour digits will
    blink.
    7. Press S1 button to set the hour
    digits. Holding down the button will
    speed up the process.
    8. After nished making all the set-
    tings, press S2 button to conrm.
    NOTE: The timer can be set up to a
    maximum of 9 hours, 59 minutes and
    59 seconds.
    TO USE THE TIMER:
    1. Press S3 button to select TIMER
    mode.
    2. The timer will be displayed in its
    current state – reset, running, or
    stopped.
    3. To resume a counting, press S1
    button to resume from where it left
    off.
    4. To start a new counting, reload the
    timer rst.
    Press S1 button to stop counting

Vuoi sapere di Freestyle Predator FS84997?

Chiedi la domanda che hai sul Freestyle Predator FS84997 semplimente ad altri proprietari di prodotto qui. Assicurati di fornire una descrizione chiara ed asauriente del problema e della tua domanda. Migliore è la descrizione del tuo problema e della domanda, più facile è per gli altri proprietari del Freestyle Predator FS84997 fornirti una buona risposta.

Visualizza qui il manuale gratuito del Freestyle Predator FS84997. Hai letto il manuale, ma risponde alla tua domanda? Quindi fai la tua domanda su questa pagina ad altri proprietari del Freestyle Predator FS84997

Specifiche

Marca Freestyle
Modello Predator FS84997
Prodotto Orologio
EAN 31112145952, 38461005685
Lingua Inglese, Tedesco, Francese, Spagnolo, Italiano, Portoghese, Cinese, Giapponese
Tipo di file PDF
Dettagli tecnici
Tipo di meccanismo Elettronico
Cronografo
Tipo di quadrante dell'orologio Quadrante LCD
Resistente all'acqua
Impermeabile fino a 100
Antiurto -
Cronometro
Funzione di allarme
Calendario
Retroilluminazione a LED
Conto alla rovescia
Design
Tipo Orologio da polso
Genere consigliato -
Materiale della scocca -
Colore struttura Verde
Materiale cinturino Nylon
Colore cinturino Verde
Tipo di vetro -
Fattore di forma Rotondo
Colore dell'orologio Verde
Stile dell'indicatore di ora Numerazione araba
Design Sport

In vendita su

    Relaterade produkter

    Orologio Freestyle