Even before we started working on this product we thought of it as a
companion piece to our previous wireless products, a sequel of sorts
- The next chapter.
We knew it had to be special so we worked hard. And then we worked
even harder. Sharing this journey with you all has been the gift of a
lifetime and I hope you can see and experience our gratitude within this
product. Thank you!
Best Regards,
Andreas Vural, founder of Happy Plugs
CONNECT AND USE
Activate Bluetooth on your phone or device.
Remove the Air 1 earbuds from the charge case, and select “Air 1 by
Happy Plugs” on your phone/device to pair. Keep the earbuds within
20 cm / 7 inches apart from each other.
Insert the Air 1 earbuds into your ears. Adjust the angle to nd
your perfect t.
When inserting the Air 1 into your ears - make sure not to
touch the touch control surface. A four second touch turns the
earbud o.
CHARGING THE CASE
Charge your Air 1 case by connecting the included Micro-USB cable to
a USB power source. When the Air 1 case LED is turned on, the case is
charging. When the light turns o your Air 1 case is fully charged.
CHARGING THE EARBUDS
To charge the Air 1 earbuds place them in the charging case. When the
Air 1 earbud LED is turned on, the earbud is charging. Once the lights
turns o you Air 1 earbud is fully charged.
LED GUIDE
The Air 1 earbuds & case LEDs are lit up while charging. When fully
charged the light turns o. When removing the Air 1 from the case, the
earbuds’ LED will blink slowly while pairing to your bluetooth source
and blink fast while connecting to each other.
CALLS
Using the Air 1 for phone calls, both earbuds are active, but only the
right (R) earbud has dual microphones. This means that you need to
use the right (R) earbud when using just one earbud for phone calls.
To get the most out of your new Air 1 when used together with an
Apple Device; while your Air 1 is paired go into Settings > General
> Accessibility, scroll down to Call Audio Routing and select
Bluetooth Headset.
TOUCH CONTROLS
Both earbuds have a touch sensor (see illustration). Tap it with your
nger to control your calls and music according to the guide.
SIRI OR GOOGLE ASSISTANT
Control your calls and music with Siri or Google Assistant by pressing
2 sec on right (R) earbud.
To use Siri on your iPhone while it is locked, go into
Settings > Touch ID & Passcode, scroll down to Allow Access
when locked and enable Siri.
RESET TO FACTORY SETTINGS
If you need to reset your earbuds and terminate any previous bluetooth
pairing:
Delete Air 1 by Happy Plugs from your Bluetooth devices list.
Make sure the charge case is charged. Put the Earphones in the
charge case.
Touch and hold the touch sensors on both left and right earphones
for 10 seconds until the earphone LEDs blink 3 times.
Take the earphones out from the charge case and hold them close
together (within 10 cm) until the LED on the left earphone stops
blinking.
Connect to your Device.
HAPPY PLUGS AIR 1 USER MANUAL
TOUCH CONTROLS
Left (L) & Right (R) Earbud
Power On Hold 2 Seconds
Power O Hold 4 Seconds
Reset (In the case) Hold 10 Seconds
Left (L) Earbud
Volume Up Single Touch
Volume Down Double Touch
Right (R) Earbud (Music Controls)
Play / Pause Single Touch
Next Track Double Touch
Previous Track Triple Touch
Right (R) Earbud (Phone Call Controls)
Call Answer / Call End Single Touch
Reject Call Double Touch
Switch Call Hold 2 Seconds
Right (R) Earbud
Siri / Google Assistant Hold 2 Seconds
YOUR HAPPY PLUGS AIR 1
1. Air 1 Earbud
2. Air 1 Charge & Storage Case
3. Earbud Touch Control Sensor
4. Earbud LED
5. Microphone
6. Earbud Charge Cradle
7. Charging Pin
8. Charge Case LED
9. Charge Case Micro-USB Connection
10. Easy Opening Cut-Out
FULL INSTRUCTIONS & FAQ AVAILABLE AT:
HELP.HAPPYPLUGS.COM
Whatsapp
Mail
Facebook
Ho bisogno di aiuto?
Numero di domande: 1
Hai domande sul Happy Plugs AIR 1 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Happy Plugs AIR 1 rispondere correttamente alla tua domanda.
Marcello,
23-12-2020 12:00:32
1 Commento
uno dei due speaker non funziona. Funziona solo dx. Si caricano entrambi. Quando li indosso, quello di sx, dice è connesso ma non su sente.
D,
28-12-2020 17:41:27
Segui la guida per il reset degli auricolari, io ho risolto così. https://happyplugs.zendesk.com/hc/en-us/articles/360013743620-Air-1-Go-How-to-Reset
Rispondi a questa domanda
Riguardo a Happy Plugs AIR 1
+7
Consulta qui gratuitamente il manuale per il Happy Plugs AIR 1. Il manuale rientra nella categoria Headset ed è stato valutato da 3 persone con una media di 8.7. Il manuale è disponibile nelle seguenti lingue: Engels. Hai domande sul Happy Plugs AIR 1 o hai bisogno di aiuto? Fai la tua domanda qui
Di seguito, troverai le domande più frequenti riguardo Happy Plugs AIR 1 .
Quando è troppo forte il mio suono?
Un suono superiore a 80 decibel può essere dannoso per l'udito. Quando il suono supera i 120 decibel, possono verificarsi anche danni diretti. La probabilità di danni all'udito dipende dalla frequenza e dalla durata dell'ascolto.
Posso effettuare chiamate in vivavoce con il mio Headset?
I nuovi Headset generalmente hanno un piccolo microfono incorporato che consente di chiamare.
Che cos'è la cancellazione del rumore?
La cancellazione del rumore assicura che il rumore ambientale sia ridotto.
Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.
DEAR CUSTOMEREven before we started working on this product we thought of it as acompanion piece to our previous wireless products, a sequel of sorts- The next chapter.We knew it had to be special so we worked hard. And then we workedeven harder. Sharing this journey with you all has been the gift of alifetime and I hope you can see and experience our gratitude within thisproduct. Thank you!Best Regards,Andreas Vural, founder of Happy PlugsCONNECT AND USEActivate Bluetooth on your phone or device.Remove the Air 1 earbuds from the charge case, and select “Air 1 byHappy Plugs” on your phone/device to pair. Keep the earbuds within20 cm / 7 inches apart from each other.Insert the Air 1 earbuds into your ears. Adjust the angle to ndyour perfect t.When inserting the Air 1 into your ears - make sure not totouch the touch control surface. A four second touch turns theearbud o.CHARGING THE CASECharge your Air 1 case by connecting the included Micro-USB cable toa USB power source. When the Air 1 case LED is turned on, the case ischarging. When the light turns o your Air 1 case is fully charged.CHARGING THE EARBUDSTo charge the Air 1 earbuds place them in the charging case. When theAir 1 earbud LED is turned on, the earbud is charging. Once the lightsturns o you Air 1 earbud is fully charged.LED GUIDEThe Air 1 earbuds & case LEDs are lit up while charging. When fullycharged the light turns o. When removing the Air 1 from the case, theearbuds’ LED will blink slowly while pairing to your bluetooth sourceand blink fast while connecting to each other.CALLSUsing the Air 1 for phone calls, both earbuds are active, but only theright (R) earbud has dual microphones. This means that you need touse the right (R) earbud when using just one earbud for phone calls.To get the most out of your new Air 1 when used together with anApple Device; while your Air 1 is paired go into Settings > General> Accessibility, scroll down to Call Audio Routing and selectBluetooth Headset.TOUCH CONTROLSBoth earbuds have a touch sensor (see illustration). Tap it with yournger to control your calls and music according to the guide.SIRI OR GOOGLE ASSISTANTControl your calls and music with Siri or Google Assistant by pressing2 sec on right (R) earbud.To use Siri on your iPhone while it is locked, go intoSettings > Touch ID & Passcode, scroll down to Allow Accesswhen locked and enable Siri.RESET TO FACTORY SETTINGSIf you need to reset your earbuds and terminate any previous bluetoothpairing:Delete Air 1 by Happy Plugs from your Bluetooth devices list.Make sure the charge case is charged. Put the Earphones in thecharge case.Touch and hold the touch sensors on both left and right earphonesfor 10 seconds until the earphone LEDs blink 3 times.Take the earphones out from the charge case and hold them closetogether (within 10 cm) until the LED on the left earphone stopsblinking.Connect to your Device.HAPPY PLUGS AIR 1 USER MANUALTOUCH CONTROLSLeft (L) & Right (R) EarbudPower On Hold 2 SecondsPower O Hold 4 SecondsReset (In the case) Hold 10 SecondsLeft (L) EarbudVolume Up Single TouchVolume Down Double TouchRight (R) Earbud (Music Controls)Play / Pause Single TouchNext Track Double TouchPrevious Track Triple TouchRight (R) Earbud (Phone Call Controls)Call Answer / Call End Single TouchReject Call Double TouchSwitch Call Hold 2 SecondsRight (R) EarbudSiri / Google Assistant Hold 2 SecondsYOUR HAPPY PLUGS AIR 11. Air 1 Earbud2. Air 1 Charge & Storage Case3. Earbud Touch Control Sensor4. Earbud LED5. Microphone6. Earbud Charge Cradle7. Charging Pin8. Charge Case LED9. Charge Case Micro-USB Connection10. Easy Opening Cut-OutFULL INSTRUCTIONS & FAQ AVAILABLE AT:HELP.HAPPYPLUGS.COM
uno dei due speaker non funziona. Funziona solo dx. Si caricano entrambi. Quando li indosso, quello di sx, dice è connesso ma non su sente.
Segui la guida per il reset degli auricolari, io ho risolto così. https://happyplugs.zendesk.com/hc/en-us/articles/360013743620-Air-1-Go-How-to-Reset