Lelit Anita PL042 Emi manuale

Lelit Anita PL042 Emi
(1)
  • Numero di pagine: 4
  • Tipo di file: PDF

Pag. 2

COMPONENTS :
1. Cold water tank
2. Cup warmer
3. Steam/coffee pilot light
4. Steam/hot water knob
5. Strainer holder retaining ring
6. Steam/hot water tube
7. Removable cup rest
8. Strainer holder
9. Single cup strainer
10. Two cup strainer
11. On/off switch
12. Steam switch
13. Coffee/hot water switch
14. Indicator light: machine on
15. Coffee press
17. Coffee beans container
18. Filter for pods
19. Removable water drainage tray
20. Removable ground coffee tray
21. Ground coffee switch
22. Grinding degree scale
23. Grinding regulation knob
24. Ground coffee distributor
25. Manometer
USER INSTRUCTIONS
Starting the machine:
1. Remove the machine from its packing and make sure all packing parts have been taken off (including the
protection bags).
2. Lay the machine on a flat and steady surface far away from hot places and from the water taps.
3. Remove the water tank cover on the back of the machine and take out the water tank (1) paying attention not
to damage the water tubes inside it.
4. Fill the tank (1) with cold water.
5. Replace the water tank back in the machine and check that the water tubes are not bent and that the filter is
well set on one of them.
6. Plug in the machine in the mains. Make sure that the wall socket is of the right voltage.
7. Place the filter holder (8) under the brewing group (5) and turn it from the left to the right. Leave it there so
that it can get warm and it gets ready for use.
8. Switch the machine on by pressing the on/off switch (11). The built-in light (14) comes on to confirm the power
supply.
9. Open the steam/hot water knob (4).
10. Press the steam switch (12) and the coffee/hot water switch (13).
11. When water comes out of the steam spout (6), press the coffee/hot water switch (13) and the steam switch
(12) again and close the steam/hot water knob (4).
12. After completing all these operations, leave the machine on.
Grinding adjustment:
13. As a reference for the grinding degree, a grinding degree scale (20) has been placed on the coffee beans
container (19): “7.6.5.4.3.2.1”
14. By taking as a point of reference the tally mark in the machine frame and by turning grinding regulation knob
(23), the grinding degree scale will turn accordingly.
15. Choose higher degrees to get coarse-ground coffee, or smaller degrees to get fine-ground coffee.
16. A correct grinding degree (taking into consideration the various coffee blends) is essential to get a good cup of
coffee. We suggest degree 3 to get a medium grinding.
Preparing an espresso coffee:
17. Check that the tank (1) contains water.
18. Press the on/off switch (11). The light (14) and the pilot light (3) will come on. Do this operation only if the
machine is off. If it’s on pass to the following point.
19. As soon as the pilot light (3) goes off, the machine is ready for use.
20. Place the single cup strainer (9) or the two cup strainer (10) in the strainer holder (8) as described in point 4.
21. Drop the bean coffee in the bowl (17)
22. Press the button (21) with the strainer holder (8) to activate the coffee grinder. When you have got the desired
coffee quantity, take the strainer holder (8) off.
23. Pack the coffee in the strainer against the press (15).
24. Insert the strainer holder (8) in the retaining ring (5) and turn it hard to the right; place the cups on the
removable cup rest (7).
25. Press the coffee/hot water switch (13).
26. When you have got the right quantity of coffee, press the switch coffee/hot water again (13).
27. Remove the strainer holder (8) and throw away the coffee grounds.
Preparing an espresso with the use of coffee pods:
28. Check that the water tank (1) has been filled in with water.
29. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee ready (3)
will come on. Do this operation only if the machine is off. If it’s on pass to the following point.
30. As soon as the indicator light: steam/coffee ready (3) goes off, the machine is ready for use.
31. Fit the pod filter (18) into the filter holder (8) that has been warmed up by leaving it attached to the brewing
group as described in point 4.
32. Open the single packed pod not damaging the pod.
33. Place the pod in its filter (18).
Lelit Anita PL042 Emi

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Lelit Anita PL042 Emi o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Lelit Anita PL042 Emi rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Lelit Anita PL042 Emi. Il manuale rientra nella categoria Macchina per il caffè ed è stato valutato da 1 persone con una media di 8.9. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Lelit Anita PL042 Emi o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Lelit Anita PL042 Emi

Generale
Marca Lelit
Modello Anita PL042 Emi
Prodotto Macchine da caffè
Lingua Inglese
Tipo di file PDF

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Lelit Anita PL042 Emi .

La tua domanda non è elencata? Fai la tua domanda qui