Lexar Professional USB 3.0

Lexar Professional USB 3.0 manuale

(1)
  • • SuperSpeed USB 3.0 interface speed up
    to 500MB/s* (transfers up to 5 times
    faster than USB 2.0*)
    • Supports the latest UDMA
    CompactFlash
    ®
    , SDXC
    TM
    **, and SD
    UHS-I cards
    • Backwards compatible with standard
    CF, SD, and SDHC cards, as well as
    USB 2.0 devices
    • Enables concurrent and card-to-card
    file transfers
    • A sleek, compact design for the
    mobile professional
    • Innovative, pop-up mechanism designed
    to protect card slots when not in use
    • LED activity light lets you know when
    transfer is complete
    Package Contents
    • Lexar Professional USB 3.0
    Dual-Slot Reader
    • USB 3.0 Cable
    Connection
    • USB 3.0 port
    Operating System Requirements
    • Windows
    ®
    7/Vista
    TM
    /XP
    • Mac OS 10+
    A Quick Look at the Reader
    Connecting the Reader
    This section describes how to connect the
    Lexar Professional USB 3.0 Dual-Slot Reader.
    To connect the reader to your computer:
    1. Plug the USB cable into the port on the
    back of the reader.
    2. Plug the other end of the USB cable into
    an available USB port on your computer.
    To open the reader:
    1. Hold the reader in the palm of your
    hand with the reader facing forward,
    with your thumb and middle finger
    pressing the side buttons, while securing
    the reader with your index finger in
    the back.
    2. As it is positioned in your hand as
    described in the previous step, gently
    squeeze the side buttons, allowing the
    reader to pop open
    to expose the
    card slots.
    To Insert Cards:
    • Place the reader on a flat surface and
    hold the front and back of the reader
    with your thumb and index fingers.
    Then, with your free hand, insert you
    SD, SDHC, SDXC, CF, or UDMA CF
    card into the appropriate slot.
    To Remove Cards:
    • After the LED activity light stops blinking,
    it is safe to remove the card. Place your
    hands back onto the reader as previously
    described to open the reader. To remove
    the inserted card, eject the card in the
    same manner you would eject a disk
    drive from your computer.
    WARNING: Do not remove the card from
    the reader when the LED activity light is
    on or blinking or you may lose data or
    damage the card. You should follow the
    steps listed above to safely eject
    the card from the reader.
    LED Activity Light
    The reader’s LED activity light was
    specifically designed to safeguard the files
    stored on your memory card, prevent
    interrupted file transfers, and reduce the risk
    of data loss or card damage. The light acts
    as a status indicator to help ensure proper
    use of the reader.
    LED Indicators:
    LED off: The reader
    is plugged into the
    computer but does not
    have a card inserted.
    LED on: The reader is
    plugged into the computer
    and has recognized that a memory card has
    been inserted. This also means that no
    data is being transferred.
    LED blinks twice on initial card insertion:
    The reader has detected the memory card.
    LED blinks continuously: The reader is
    transferring data between the memory
    Dual-Slot Reader
    USB 3.0
    For UDMA CompactFlash
    ®
    , SDXC
    TM
    ,
    and SD UHS-I (SD 3.0) cards
    Quick Start
    Guide
    The highest speed offering in the Lexar
    ®
    Professional reader line, the Lexar
    ®
    Professional USB 3.0 Dual-Slot Reader is an excellent solution for professional
    photographers and videographers looking to maximize their workflow with
    blazing-fast transfer speeds. Features include:
    SD Card slot
    Activity LED
    CompactFlash
    slot
    Side buttons
    USB 3.0 port
    Connectors
    *Results may vary based on system configuration
    and card speed.
    **Not supported on all operating system platforms.

Vuoi sapere di Lexar Professional USB 3.0?

manual_questions_numberofquestions 0

Chiedi la domanda che hai sul Lexar Professional USB 3.0 semplimente ad altri proprietari di prodotto qui. Assicurati di fornire una descrizione chiara ed asauriente del problema e della tua domanda. Migliore è la descrizione del tuo problema e della domanda, più facile è per gli altri proprietari del Lexar Professional USB 3.0 fornirti una buona risposta.

Visualizza qui il manuale gratuito del Lexar Professional USB 3.0. Hai letto il manuale, ma risponde alla tua domanda? Quindi fai la tua domanda su questa pagina ad altri proprietari del Lexar Professional USB 3.0

Specifiche

Marca Lexar
Modello Professional USB 3.0
Prodotto Lettori di memoria
EAN 5053313948816, 5053460604733, 5053460916775, 650590165254, 6505901652548
Lingua Italiano, Olandese, Inglese, Tedesco, Francese, Spagnolo, Portoghese, Polacco, Russo, Slovacco, Ungherese
Tipo di file PDF
Prestazione
Tipi schede di memoria CF, SDXC
Interno
Colore del prodotto Nero
Connettività
Tipo interfaccia USB 3.2 Gen 1 (3.1 Gen 1)
Quantità porte USB 3.2 Gen 1 (3.1 Gen 1) 0

In vendita su

    Relaterade produkter

    Lettori di memoria Lexar

    manual_uploadmanual_title

    manual_uploadmanual_description