Motorola C1001L

Motorola C1001L manuale

(5)
  • Switch on the mains power.
    Installing and charging the handset
    1. Remove the battery cover from the back of the handset and insert the
    rechargeable Ni-MH battery cells supplied. Please note the ’+’ and
    ’-’ markings inside the battery compartment and insert in the correct
    direction.
    2. Slide the battery cover back into place.
    3. If you are charging the batteries for the rst time, place the handset
    on the base to charge for at least 24 hours continuously.
    4. When the handset is fully charged,
    icon will appear steady on
    the display. Plug the other end of the telephone line cord (make sure
    that one end is already plugged into the base) into the telephone
    wall socket.
    Connecting the handset and charger
    (for multi-pack only)
    If you have purchased a multiple pack, you will need to carry out this
    process for all the handsets and chargers.
    1. Plug the power adaptor into the socket marked
    on the underside
    of the charger and plug the other end into the mains power wall
    socket.
    2. Remove the battery cover from the back of the handset and insert
    the 2 x AAA NiMH rechargeable batteries supplied. Please note the
    ’+’ and ’-’ markings inside the battery compartment and insert in the
    correct direction.
    3. Slide the battery cover back into place.
    4. If you are charging the batteries for the rst time, place the handset
    on the charger to charge for at least 24 hours continuously.
    5. When the handset is fully charged,
    icon will appear steady on the
    display. The display will show
    HANDSET
    and handset number (e.g. 2) to
    indicate that it is registered to the base.
    You can set different ringer melodies for your internal and external calls.
    Choose from 5 different ringer melodies.
    You will hear a sample ring as you scroll to each ring melody.
    1. Press
    , scroll to
    HANDSET
    and press .
    2. Press
    or to select
    INT MELODY
    or
    EXT MELODY
    and press .
    3. Press
    or to select the ringer melody (1 - 5).
    4. Press
    to conrm or to return to the previous menu.
    NOTE
    If you subscribe to your network providers caller ID service, calls from the
    numbers that you have stored in the phonebook will ring using the ringer
    melody you have set when you store the entry.
    5.3 Auto answer
    Your phone is set to answer calls by lifting the handset off the base or
    charger. You can switch this feature off so that calls can only be answered
    by pressing .
    1. Press
    , scroll to
    HANDSET
    and press .
    2. Scroll
    to
    AUTO ANSWER
    and press .
    3. Press
    or to select
    ON
    or
    OFF
    and press to conrm.
    5.4 Handset name
    If you are using more than one handset with your C1L base, you can set a
    personalized name for each handset to easily distinguish between them.
    A name can be up to 10 characters long.
    1. Press
    , scroll to
    HANDSET
    and press .
    2. Scroll
    to
    NAME
    and press .
    3. Enter the new handset name and press
    to conrm.
    Delete the current name by pressing
    .
    NOTE
    The handset name will only be displayed for approximately 20 seconds
    when no button is pressed. If you make a mistake, press
    to delete
    the last character or digit.
    6. Press
    to delete the number if required, then enter the new
    number
    and press
    .
    7. Scroll
    or to select a new ringer melody and press . The
    display
    shows
    ADD ENTRY
    .
    8. Enter the next name and number entry you wish to store in your
    phonebook or press
    twice to return to standby.
    4.4 Delete an entry
    1. Press . The display shows
    PHONEBOOK
    .
    2. Press
    . The display shows
    ADD ENTRY
    .
    3. Scroll
    to
    DELETE ENTRY
    and press .
    4. Scroll
    or to the entry you want to delete, or search
    alphabetically
    and press
    . The display shows
    CONFIRM ?
    .
    5. Press
    to conrm or to cancel.
    5. Handset settings
    5.1 Handset ringer volume
    You can adjust the ringer volume and set different volume levels for your
    internal and external calls. Choose from 5 volume levels or Off.
    1. Press
    , scroll to
    HANDSET
    and press .
    2. Press
    or to select
    INT RING VOL
    or
    EXT RING VOL
    and press .
    3. Press
    or to select the volume (1 -5 or OFF) .
    4. Press
    to conrm or to return to the previous menu.
    NOTE
    When the phone is ringing, you can adjust the ringer volume by pressing
    or .
    5.2 Handset ringer melody
    Press three times to enter O.
    Press
    once to enter M.
    WRITING TIPS
    Press
    to delete the last character or digit.
    Press
    or to move between characters.
    Press
    to insert a space.
    Use
    twice to insert a dash.
    4.2 View or dial an entry
    1. Press .
    icon is displayed.
    2. Scroll
    or to the entry you want.
    OR
    Enter the rst letter of the name to search alphabetically.
    The rst name that starts with this letter or the nearest letter in the
    alphabet will be displayed. Scroll or to the entry you want.
    3. Press
    to dial or to return to standby.
    NOTE
    When the name is displayed, you can switch between the name and
    number by pressing
    .
    4.3 Edit a name and number
    1. Press . The display shows
    PHONEBOOK
    .
    2. Press
    . The display shows
    ADD ENTRY
    .
    3. Scroll
    to
    MODIFY ENTRY
    and press .
    4. Scroll
    or to the entry you want to edit, or search alphabetically
    and press . The existing name is displayed.
    5. Press
    to delete the name if required, then enter the new name
    and press . The existing number is displayed.
    1. Press
    on the base. All handsets registered to the base will ring.
    2. To stop the ringing, press
    on the base again or press any button
    on the handset.
    4. Phonebook
    You can store up to 50 names and numbers in the phonebook. Names
    can be up to 12 characters long and numbers up to 24 digits. You can also
    select different ringer melodies for the phonebook entries.
    4.1 Store a name and number
    If the C1L is connected to a switchboard, you may need to enter a pause in
    a stored number. This gives the switchboard time to nd an outside line.
    A pause is normally stored after the switchboard access code (e.g. 9).
    When storing a number, press and hold until the display shows P.
    You can then continue storing the phone number.
    If you have subscribed to Caller ID Service and wish to display the name
    of your caller instead of the number, save the full telephone number
    including the area code to your phonebook.
    You can store multiple entries with the same number. However, to prevent
    unnecessary duplicated entries, you can only store the same name once.
    1. Press
    . The display shows
    PHONEBOOK
    .
    2. Press
    . The display shows
    ADD ENTRY
    .
    3. Press
    . The display shows
    NAME ?
    .
    4. Enter the name and press
    . The display shows
    NUMBER ?
    .
    5. Enter the number and press
    . The display shows
    MELODY 1
    .
    6. Press
    or to select the ringer melody you want and press .
    The display shows
    ADD ENTRY
    .
    7. Enter the next name and number entry that you wish to store in your
    phonebook or press
    twice to return to standby.
    ENTERING NAMES
    Use the keypad letters to enter names, e.g. to store TOM:
    Press
    once to enter T.
    4. Press
    again. The display shows
    NAME ?
    .
    5. Enter the name and press
    . The number is displayed.
    6. Edit the number if necessary, then press
    .
    7. Press
    or to select the ringer melody you want and press .
    The number is stored.
    3.6.3 Delete an entry
    1. Press
    to open the Redial list.
    2. Scroll
    or to the entry you want and press . The display
    shows
    DELETE ?
    .
    3. Press
    to conrm or to cancel.
    3.64 Delete the entire Redial list
    1. Press
    to open the Redial list.
    2. Press and hold
    . The display shows
    DELETE ALL ?
    .
    3. Press
    to conrm or to cancel.
    3.7 Lock / unlock the keypad
    You can lock the keypad so that it cannot be operated accidentally while
    carrying it around.
    NOTE
    When the keypad is locked, you can still answer incoming calls and
    operate the handset as normal during the call. When the call ends, the
    keypad lock comes on again.
    1. Press and hold
    .
    icon is displayed.
    2. To unlock the keypad, press any key on your handset. The display
    shows
    PRESS *
    .
    3. Press
    within 5 seconds.
    3.8 Paging / Find handset
    You can alert a handset user that they are wanted or locate a
    missing handset.
    Paging calls cannot be answered by a handset.
    NOTE
    If there is no answer from the other handset and you wish to return
    to your external caller, press
    .
    Your external call resumes automatically after 30 seconds if there is
    no answer.
    3.5.4 3-way conference call
    You can hold a 3-way conference call between 2 internal callers and 1
    external caller.
    During a call with an external caller:
    1. Press
    followed by the handset number (1-5) that you want to
    establish a conference call.
    2. When the other handset answers, press
    to connect all three
    callers to begin the conference call. icon is displayed.
    3. If there is no answer from the other handset, press
    to return to
    your external caller.
    4. Press
    to end the call.
    3.6 Redial
    The last 10 entries dialled are stored in the redial list.
    3.6.1 View or dial an entry
    1. Press
    to open the Redial list.
    2. Scroll
    or to the entry you want.
    3. Press
    to dial the displayed entry or press to return to
    standby.
    NOTE
    If the caller’s number exactly matches an entry stored in the
    phonebook, the name is displayed. Press
    to see the caller’s number.
    3.6.2 Copy a Redial list number to the phonebook
    1. Press
    to open the Redial list.
    2. Scroll
    or to the entry you want.
    3. Press
    . The display shows
    ADD ?
    .
    2. Getting to know your phone
    Overview of your handset
    Flashes when battery is almost fully discharged.
    1
    This feature is dependent on your Network Service provider supporting
    the service. A subscription fee may be payable.
    2
    For this feature to work, you must subscribe to Caller ID Service from
    your network operator. A subscription fee may be payable.
    Underside of the base
    A
    A Page
    In standby mode, press to ring the handset(s).
    Press and hold to enter registration mode when registering handsets.
    Navigating the menus
    Your C1L has an easy to use menu system.
    Each menu has a list of options, which you can see on the menu map on
    the following page.
    When the handset is switched on and in standby:
    1. Press
    to open the main menu.
    2. Then use
    or buttons to scroll through the available options.
    3. Press
    to select an option. To return to the previous menu level,
    press
    . To exit the menu and return to standby, press .
    NOTE
    If no buttons are pressed for 20 seconds, the handset returns to standby
    automatically.
    Handset LCD Display
    Flashes to indicate an incoming external call.
    External call in progress.
    Flashes to indicate an incoming internal call.
    Internal call in progress.
    3-way call in progress or transfer an external call to another C1L
    handset registered to the base.
    Eco mode is ON.
    Flashes to indicate new voicemail messages received. Off when you
    have no voicemail messages.
    1
    Indicates signal strength.
    Flashes when handset is not registered to the base or if you go out of
    range.
    Menu is opened.
    Phonebook is opened.
    Flashes to indicate new calls list entries received.
    2
    Answered call (when viewing the Calls list).
    2
    Unanswered call (when viewing the Calls list).
    2
    Keypad is locked.
    Displayed number is longer than 12 digits.
    The approximate power levels of your battery are indicated as follows:
    Battery is fully charged.
    Battery is partially charged.
    Battery is running low.
    Menu map
    PHONEBOOK HANDSET DATE -- TIME
    ADD ENTRY BEEP DATE SET
    MODIFY ENTRY INT RING VOL CLOCK SET
    DELETE ENTRY EXT RING VOL ALARM SET
    SETUP INT MELODY REGISTER
    DEL HANDSET EXT MELODY SELECT BASE
    PIN CODE AUTO ANSWER REG BASE
    DIAL MODE NAME
    RECALL LANGUAGE
    DEFAULT KEYLOCK ?
    ECO MODE
    3. Using the phone
    NOTE
    Your handset will automatically time the duration of all external calls. The
    call timer will display after the rst 15 seconds of your call. When the call
    ends, the total duration of your talk time is shown for 5 seconds.
    3.1 Switch the handset on / off
    Press and hold to switch the handset on or off.
    3.2 Calls
    3.2.1 Make a call
    1. Press
    .
    2. When you hear the dial tone, dial the number.
    3.2.2 Preparatory dialling
    1. Dial the number rst. If you make a mistake press
    to delete the
    last digit.
    2. Press
    to dial.
    3.2.3 End a call
    Press
    , or place the handset back on the base or charger.
    3.2.4 Receive a call
    When you receive an external call, the phone rings and
    icon ashes
    on the display.
    1. If the handset is off the base then press
    to answer the call, or if
    the handset is on the base simply lift the handset to answer the call.
    NOTE
    If you prefer to press
    when you lift up the handset to answer a call,
    you will need to switch Auto answer off.
    3.3 Adjust the earpiece volume
    During a call, press or to increase or decrease the volume. There are
    5 levels to choose from.
    3.4 Mute
    You can mute your handset so that you can talk to someone nearby
    without your caller hearing.
    1. During a call, press
    . The display shows
    MUTE
    and your caller
    cannot hear you.
    2. Press
    again to resume your call.
    3.5 Intercom
    3.5.1 Make an internal call
    If you have more than one handset registered to the base, you can make
    internal calls between two handsets.
    icon is displayed to indicate an internal call.
    1. Press
    followed by the number (1-5) of the handset you want
    to call.
    3.5.2 Receive an internal call
    When you receive an internal call,
    icon ashes and the handset
    number that is calling you is displayed.
    1. Press
    to answer the call.
    3.5.3 Transfer a call
    You can transfer an external call to another handset registered to the base.
    During an external call:
    1. Press
    followed by the handset number (1-5) that you want to
    transfer to.
    2. When the other handset answers, press
    to complete the transfer.
    1. Getting started
    IMPORTANT
    Do not place your C1L in the bathroom or other humid areas.
    Location
    You need to place your C1L base within 1.5 metres of the mains power
    and telephone wall socket so that the cables will reach. The socket-outlet
    should be installed near the equipment and should be easily accessible.
    Make sure that it is at least 1 metre away from other electrical appliances
    to avoid interference. Your C1L works by sending radio signals between
    the handset and base. The strength of the signal depends on where you
    place the base. Placing it as high as possible ensures the best signal.
    HANDSET RANGE
    The unit has a range of up to 300 metres outdoors when there is a clear
    line of sight between the base and handset. Any obstruction between the
    base and handset will reduce the range signicantly. With the base indoors
    and the handset either indoors or outdoors, the range will normally be up
    to 50 metres. Thick concrete and stone walls can severely affect the range.
    SIGNAL STRENGTH
    The
    icon on your handset indicates that you are within range of the
    base. When out of range of the base, the icon ashes. If you are on a
    call, you will hear a warning beep.
    The line will hang up if the handset moves out of range of the base. Move
    closer to the base. The handset will automatically reconnect to the base.
    Setting up
    IMPORTANT
    The base station must be plugged into the mains power at all times. Do
    not connect the telephone line cord into the wall socket until the handset
    is fully charged. Use only the power adaptor and telephone line cord
    supplied with the product.
    Connecting the base
    1. Plug the telephone line cord into the socket marked on the
    underside of the base.
    2. Plug the power adaptor into the socket marked
    on the underside
    of the base and plug the other end into the mains power wall socket.
    This user guide provides you with all the information you
    need to get the most from your phone.
    To set up your phone, follow the simple instructions in
    ‘Getting Started’, on the next few pages.
    IMPORTANT
    Only use the telephone line cord supplied.
    Got everything?
    • C1L base & cordless handset
    • 2 x rechargeable Ni-MH battery cells
    • Power adaptor for the base
    • Telephone line cord
    If you have purchased a C1L multiple pack you will also have the
    following additional items:
    • Cordless handset & charger
    • 2 x rechargeable Ni-MH battery cells
    • Power adaptor for the charger
    ECOMOTO: a convergence of efforts by marketing, design, research,
    engineering and supply chain management that leads to better
    products for everyone. A holistic view that focuses on both social and
    environmental responsibility. A passion and a shared point of view.
    The right thing to do.
    • Meets and / or exceeds EMEA environmental regulatory
    requirements.
    • Eco friendly packaging with a minimum 20% post consumer recycled
    content.
    • Phone housing is built with a minimum of 25% post consumer
    recycled content plastic.
    • Energy efcient charger that meets EU Code of Conduct
    requirements.
    • ECO mode function which reduces the transmitted power and energy
    consumption.
    Welcome...
    to your new Motorola C1L Digital Cordless
    Telephone!
    • All handsets are fully cordless for locating anywhere within range.
    • 50 Name and Number phonebook.
    • Caller ID shows you who’s calling and see details of the last 40 callers
    in a Calls list.1
    • Redial up to 10 of the last numbers called.
    • Register up to 5 handsets to a single base and register each handset
    with up to 4 different bases.
    • Make internal calls and transfer external calls between handsets.
    • Choose from 5 different ringtones for internal and external calls as
    well as numbers stored in the phonebook.
    Please note that this equipment is not designed for making
    emergency telephone calls when the power fails. Alternative
    arrangements should be made for access to emergency services.
    Need help?
    If you have any problems setting up or using your C1L, please
    contact Customer Services on XXXX XXXXXXX.
    Alternatively, you may nd the answer in the ‘Help’ section at the
    back of this guide.
    1
    You must subscribe to your network providers Caller ID or Call
    Waiting service for these features to work. A subscription fee may
    be payable.
    Technical Information
    How many telephones can I have?
    All items of telephone equipment have a Ringer Equivalence Number
    (REN), which is used to calculate the number of items which may be
    connected to any one telephone line. Your C1L has a REN of 1. A total
    REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may
    not ring. With different telephone types, there is no guarantee of ringing,
    even when the REN is less than 4.
    Any additional handsets and chargers that you register have a REN of 0.
    Connecting to a switchboard
    This product is intended for use within Europe for connection to the
    public telephone network.
    Recall
    You may need to use the recall function if you are connected to a switch.
    Contact your PABX supplier for further information.
    Manufactured, distributed or sold by Suncorp Technologies Ltd., ofcial
    licensee for this product. MOTOROLA and the Stylized M Logo are
    trademarks or registered trademarks of Motorola Trademark Holdings,
    LLC. and are used under license. All other trademarks are the property
    of their respective owners. © 2012 Motorola Mobility LLC. All rights
    reserved.
    Version 3 (EU)
    IMPORTANT
    Warning! Use only the approved rechargeable Ni-MH battery cells (2 x
    AAA Ni-MH 300mA rechargeable batteries) supplied with your C1L.
    BATTERY LOW WARNING
    If
    icon ashes on the display and you hear a warning beep every
    minute during a call, you will need to recharge the handset before you
    can use it again.
    When charging,
    icon will scroll on the display.
    BATTERY PERFORMANCE
    In ideal conditions, fully charged batteries should give up to 6.5 hours talk
    time or up to 135 hours standby time on a single charge.
    1
    Note that new batteries do not reach their full capacity until they have
    been put to normal use for several days.
    To keep your batteries in the best condition, leave the handset off the
    base for a few hours at a time.
    Running the batteries right down at least once a week will help them last
    as long as possible.
    The charge capacity of rechargeable batteries will reduce with time as
    they wear out, giving the handset less talk / standby time. Eventually they
    will need to be replaced.
    After charging your handset for the rst time, subsequent charging time is
    about 6–8 hours a day. Batteries and handset may become warm during
    charging. This is normal.
    1
    All talk and standby times are approximate and depend on features
    selected and usage pattern.
    Date and time
    If you have subscribed to a Caller ID Service, the date and time is set
    automatically for all handsets when you receive your rst call.
    If you do not have a Caller ID service, you can set the date and time
    manually, see section “7. Clock & Alarm”.
    Your C1L is now ready for use.
    EarpieceDisplay
    Up
    During a call, press to
    increase earpiece volume.
    When the phone is
    ringing, press to increase
    the handset ringer
    volume.
    Press to scroll through
    the menu options, redial
    list, calls list and
    phonebook entries.
    Menu / OK / Mute
    Press to open the
    Menu.
    Press to select menu
    options and to
    conrm a displayed
    option.
    During a call, press to
    turn mute on / off.
    Talk
    Press to make and
    receive calls.
    Keypad lock / * /
    Switch from Pulse to
    Tone
    Press and hold to lock
    the keypad.
    To unlock, press any
    key and follow the on
    screen instructions.
    Dial a *.
    During a call, press
    and hold to switch
    from pulse dialling to
    tone dialling.
    Recall
    Use with switchboard /
    PABX services and some
    network services.
    Redial
    In standby mode,
    press to open the
    redial list.
    Phonebook / Delete / Back
    In standby mode, press to
    open the phonebook menu.
    In editing mode, press to
    delete characters and digits.
    Go back to the previous
    menu level.
    Calls list / Down
    In standby mode, press to
    open the calls list.
    During a call, press to
    decrease earpiece volume.
    When the phone is ringing,
    press to decrease the
    handset ringer volume.
    Press to scroll through the
    menu options, redial list,
    calls list and phonebook
    entries.
    End Call / Exit / Switch
    Handset on / off
    Press to end a call.
    When viewing the redial /
    calls list / phonebook or
    when in the menu, press to
    exit and return to standby.
    Press and hold for 3
    seconds to switch the
    handset on / off.
    Pause / #
    Press and hold to enter
    a pause (P) when
    pre-dialling or storing
    numbers.
    Dial a #.
    Intercom
    Used to make internal
    calls and transfer calls
    to other C1L handsets
    registered to the base.
    Microphone
    Battery
    status
    Scrolls
    when
    charging
    Time or Handset name
    In standby mode, press and hold to switch handset
    0
    idle screen between handset name or time.
    Eco mode
    Circle around
    appears when
    Eco mode is ON
    Warning:
    Charge the handset for 24 hours before use.
    Motorola C1L
    For C1001L, C1002L, C1003L and C1004L
    Digital Cordless Telephone
Motorola C1001L

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Motorola C1001L o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Motorola C1001L rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Motorola C1001L. Il manuale rientra nella categoria Telefono DECT / VoIP ed è stato valutato da 5 persone con una media di 7.8. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Motorola C1001L o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Motorola C1001L

Generale
Marca Motorola
Modello C1001L
Prodotto Telefoni DECT / VoIP
EAN 5055374792063, 5055374792216, 5055374792506, 5055374792513, 5055374793305, 5055374793312, 5055374793329, 5055374794029, 5055374794036, 5055374794203, 5055374795248, 5055374795347
Lingua Inglese
Tipo di file PDF
Prestazione
Tipo Telefo✗ DECT
Segreteria telefonica
Intercom
Design
Colore del prodotto Nero
Tipo di montaggio Scrivania
Telefono per persone anziane
Numero di tasti 21
Caratteristiche del telefono
Telefono con vivavoce
Funzionalità multiricevitore -
Capacità rubrica 50
Gestione chiamata
Identificatore di chiamata
Chiamata in attesa
Capacità elenco ricomposizione 10
Caratteristiche di gestione
Tasti di navigazione
Controllo del volume Digitale
Supporto lingue Multi
Indicazione
Indicatore della capacità della batteria
Indicatore di ricarica della batteria
Display
Display incorporato
Tipologia display LCD
Connettività
Collegamenti wireless
Jack DC-in
Gestione energetica
Tipo batteria Mini Stilo AAA
Tempo di conversazione 10
Tempo di stand-by 200
Tecnologia batteria Nichel-Metallo Idruro (NiMH)
Numero di batterie 2
Certificati di sicurezza
Certificazione Energy Star -
Contenuto dell'imballo
Manuale dell'utente
Numero di cornette incluse 1

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Motorola C1001L .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più