NETGEAR RangeMax™ NEXT Wireless-N Access Point WN802T
Start Here
Follow these instructions to set up your wireless-N access point. You can also consult the
documentation links on the Resource CD or the NETGEAR knowledge base at
http://kbserver.netgear.com. Please consult the Resource CD or the Documentation link on
the user interface to access the NETGEAR RangeMax NEXT Wireless-N Access Point
WN802T Reference Manual for instructions on advanced configuration options.
Estimated Completion Time: 20 minutes.
Tip: Before mounting the WN802T Wireless-N Access Point in a high location, first set
up and test the WN802T to verify wireless network connectivity.
First, Set Up the WN802T
1.CONNECTTHE WIRELESS-N ACCESS POINT TO YOUR COMPUTER
a.Unpack the box and verify the contents.
b.Prepare a computer with Internet access and an Ethernet adapter. If this computer
is already part of your network, record its TCP/IP configuration settings.
Configure the computer with a static IP address of 192.168.0.210 and
255.255.255.0 as the Subnet Mask.
c.Connect an Ethernet cable from the
WN802T to the PC.
d.Securely insert the other end of the cable
into the WN802T Ethernet port.
e.Connect the NETGEAR Switching
Power Supply from the wireless-N
access point to an AC power outlet.
Note: Only connect your wireless-N
access point using the switching power
supply provided with the WN802T.
f.Check the lights on the front of the wireless-N access point:
•Power: The green power light should be
lit. If the power light is not lit, check the
connections and check to see if the power
outlet is controlled by a wall switch that is
turned off.
•Ethernet: The Ethernet (LAN) light
should be lit (amber for 10/100 Mbps and green
for 1000 Mbps) indicating that a connection
has been made. If not, make sure the Ethernet
cable is securely attached at both ends.
• WLAN: The blue wireless light should
be lit and blinking indicating that it is sending a
signal.
2.CONFIGURE LAN AND WIRELESS ACCESS
a.Configure the WN802T Ethernet port for LAN access.Connect to the WN802T
by opening your browser and entering http://192.168.0.233 in the address field.
A login window will display.
b.When prompted, enter
admin for the
user name and
password for the
password, both in lower case letters.
The NETGEAR RangeMax™
NEXT Wireless-N Access Point
WN802T user interface will display.
c.Select Wireless Settings under the
Setup menu on the left navigation pane and configure your wireless interface for
wireless access.
d.Then select WEP/WPA Settings under Security and configure the level of data
encryption security for your network.
See the online help or the online Reference Manual for full instructions.
http://192.168.0.233
e.Finally, select Basic Settings under the Setup menu on the left navigation pane
and configure the IP Settings for your network.
Note: If you change the default subnet of the LAN IP address, you will be
disconnected from the WN802T Wireless-N Access Point user interface. To
reconnect, reconfigure your computer with a static IP address within the new
LAN IP subnet.
Tip: Before you deploy your wireless-N access point, reserve an IP address
(based on the WN802T’s MAC address) on the DHCP server. That way, you can
configure the wireless-N access point with a static IP address which you can
always use to log in to make future configuration changes.
3.TESTWIRELESSCONNECTIVITY
Using a computer with a wireless adapter configured according to the wireless
settings you just set in the WN802T, establish a wireless connection to the WN802T.
Deploy the WN802T
Now that you have finished the setup steps, you are ready to deploy the WN802T in your
network. If needed, you can now reconfigure the PC you used in step 1 back to its original
TCP/IP settings.
Warning: To allow for proper ventilation, always install the unit vertically using the
included stand. Do not lay the unit flat.
1.Disconnect the WN802T from the computer and place it where you will deploy it.
The best location is elevated, such as wall mounted or on the top of a cubicle, at the
center of your wireless coverage area, and within line of sight of all the mobile
devices. The WN802T should be positioned vertically.
2.Connect an Ethernet cable from your WN802T wireless-N access point to a LAN port
on your router, switch, or hub.
3.Connect the power adapter to the wireless-N access point and plug the power adapter
in to a power outlet. The Power, WLAN and Ethernet lights should light up.
Note: A wall mount kit is included with theWN802T. Instructions for installing the
brackets and mounting the WN802Tare in the online NETGEAR RangeMax NEXT
Wireless-N Access Point WN802T Reference Manual.
Whatsapp
Mail
Facebook
Ho bisogno di aiuto?
Numero di domande: 0
Hai domande sul Netgear WN802T o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Netgear WN802T rispondere correttamente alla tua domanda.
Riguardo a Netgear WN802T
Consulta qui gratuitamente il manuale per il Netgear WN802T. Il manuale rientra nella categoria Punto di accesso ed è stato valutato da 1 persone con una media di 7.1. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Netgear WN802T o hai bisogno di aiuto? Fai la tua domanda qui
Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.
)NSTALLATION'UIDENETGEAR RangeMax™ NEXT Wireless-N Access Point WN802TStart HereFollow these instructions to set up your wireless-N access point. You can also consult thedocumentation links on the Resource CD or the NETGEAR knowledge base athttp://kbserver.netgear.com. Please consult the Resource CD or the Documentation link onthe user interface to access the NETGEAR RangeMax NEXT Wireless-N Access PointWN802T Reference Manual for instructions on advanced configuration options.Estimated Completion Time: 20 minutes.Tip: Before mounting the WN802T Wireless-N Access Point in a high location, first setup and test the WN802T to verify wireless network connectivity.First, Set Up the WN802T1. CONNECT THE WIRELESS-N ACCESS POINT TO YOUR COMPUTERa. Unpack the box and verify the contents.b. Prepare a computer with Internet access and an Ethernet adapter. If this computeris already part of your network, record its TCP/IP configuration settings.Configure the computer with a static IP address of 192.168.0.210 and255.255.255.0 as the Subnet Mask.c. Connect an Ethernet cable from theWN802T to the PC.d. Securely insert the other end of the cableinto the WN802T Ethernet port.e. Connect the NETGEAR SwitchingPower Supply from the wireless-Naccess point to an AC power outlet.Note: Only connect your wireless-Naccess point using the switching powersupply provided with the WN802T.f. Check the lights on the front of the wireless-N access point:• Power: The green power light should belit. If the power light is not lit, check theconnections and check to see if the poweroutlet is controlled by a wall switch that isturned off.• Ethernet: The Ethernet (LAN) lightshould be lit (amber for 10/100 Mbps and greenfor 1000 Mbps) indicating that a connectionhas been made. If not, make sure the Ethernetcable is securely attached at both ends.• WLAN: The blue wireless light shouldbe lit and blinking indicating that it is sending asignal.2. CONFIGURE LAN AND WIRELESS ACCESSa. Configure the WN802T Ethernet port for LAN access.Connect to the WN802Tby opening your browser and entering http://192.168.0.233 in the address field.A login window will display.b. When prompted, enteradmin for theuser name andpassword for thepassword, both in lower case letters.The NETGEAR RangeMax™NEXT Wireless-N Access PointWN802T user interface will display.c. Select Wireless Settings under theSetup menu on the left navigation pane and configure your wireless interface forwireless access.d. Then select WEP/WPA Settings under Security and configure the level of dataencryption security for your network.See the online help or the online Reference Manual for full instructions.http://192.168.0.233e. Finally, select Basic Settings under the Setup menu on the left navigation paneand configure the IP Settings for your network.Note: If you change the default subnet of the LAN IP address, you will bedisconnected from the WN802T Wireless-N Access Point user interface. Toreconnect, reconfigure your computer with a static IP address within the newLAN IP subnet.Tip: Before you deploy your wireless-N access point, reserve an IP address(based on the WN802T’s MAC address) on the DHCP server. That way, you canconfigure the wireless-N access point with a static IP address which you canalways use to log in to make future configuration changes.3. TEST WIRELESS CONNECTIVITYUsing a computer with a wireless adapter configured according to the wirelesssettings you just set in the WN802T, establish a wireless connection to the WN802T.Deploy the WN802TNow that you have finished the setup steps, you are ready to deploy the WN802T in yournetwork. If needed, you can now reconfigure the PC you used in step 1 back to its originalTCP/IP settings.Warning: To allow for proper ventilation, always install the unit vertically using theincluded stand. Do not lay the unit flat.1. Disconnect the WN802T from the computer and place it where you will deploy it.The best location is elevated, such as wall mounted or on the top of a cubicle, at thecenter of your wireless coverage area, and within line of sight of all the mobiledevices. The WN802T should be positioned vertically.2. Connect an Ethernet cable from your WN802T wireless-N access point to a LAN porton your router, switch, or hub.3. Connect the power adapter to the wireless-N access point and plug the power adapterin to a power outlet. The Power, WLAN and Ethernet lights should light up.Note: A wall mount kit is included with theWN802T. Instructions for installing thebrackets and mounting the WN802Tare in the online NETGEAR RangeMax NEXTWireless-N Access Point WN802T Reference Manual.