Pioneer VSX-522 manuale

Pioneer VSX-522
8.5 · 19
PDF manuale
 · 39 pagine
Inglese
manualePioneer VSX-522

Basic playback

4
4
23

Playing a USB device

It is possible to listen to two-channel audio using the USB
interface on the front of this receiver.
Important
Pioneer cannot guarantee compatibility (operation and/or
bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may
occur when connected to this receiver.
Note
This includes playback of WMA/MP3/MPEG-4 AAC files
(except files with copy-protection or restricted playback).
Compatible USB devices include external magnetic hard
drives, portable flash memory (particularly keydrives) and
digital audio players (MP3 players) of format FAT16/32. It is
not possible to connect this receiver to a personal
computer for USB playback.
With large amounts of data, it may take longer for the
receiver to read the contents of a USB device.
If the file selected cannot be played back, this receiver
automatically skips to the next file playable.
When the file currently being played back has no title
assigned to it, the file name is displayed in the OSD instead;
when neither the album name nor the artist name is
present, the row is displayed as a blank space.
Note that non-roman characters in the playlist are
displayed as ‘*’.
Make sure the receiver is in standby when disconnecting
the USB device.
1
Switch on the receiver and your TV.
See Connecting a USB device on page 17.
2
Switch the TV input so that it connects to the receiver.
Switch the TV input to the input that connects this
receiver to the TV through the corresponding
composite cable.
3
Press
iPod/USB
on the remote control to switch the
receiver to the iPod/USB input.
Loading appears in the OSD as this receiver starts
recognizing the USB device connected. After the
recognition, a playback screen appears in the OSD and
playback starts automatically.
Basic playback controls
This receiver’s remote control buttons can be used for basic
playback of files stored on USB devices.
Press
iPod/USB
to switch the remote control to the iPod/
USB operation mode.
Important
If a USB Error message lights in the display, try following the
points below:
Switch the receiver off, then on again.
Reconnect the USB device with the receiver switched off.
Select another input source (like BD), then switch back to
iPod/USB.
Use a dedicated AC adapter (supplied with the device) for
USB power.
For more information on error messages, see USB messages
on page 36.
If this doesn’t remedy the problem, it is likely your USB device
is incompatible.
Compressed audio compatibility
Note that although most standard bit/sampling rate
combinations for compressed audio are compatible, some
irregularly encoded files may not play back. The list below
shows compatible formats for compressed audio files:
MP3 (MPEG-1/2/2.5 Audio Layer 3) – Sampling rates:
32 kHz/44.1 kHz/48 kHz; Bit rates: 32 kbps to 320 kbps
(128 kbps or higher recommended); File extension: .mp3
WMA (Windows Media Audio) – Sampling rates: 32 kHz/
44.1 kHz/48 kHz; Bit rates: 48 kbps to 192 kbps (128 kbps or
higher recommended); File extension: .wma; WMA9 Pro
and WMA lossless encoding: No
AAC (MPEG-4 Advanced Audio Coding) – Sampling rates:
32 kHz/44.1 kHz/48 kHz; Bit rates: 16 kbps to 320 kbps
(128 kbps or higher recommended); File extension: .m4a;
Apple lossless encoding: No
Other compatibility information
VBR (variable bit rate) MP3/WMA/MPEG-4 AAC playback:
Yes (Note that in some cases playback time will not be
displayed correctly.)
DRM (Digital Rights Management) protection compatible:
Yes (DRM-protected audio files will not play in this
receiver.)
About MPEG-4 AAC
Advanced Audio Coding (AAC) is at the core of the MPEG-4
AAC standard, which incorporates MPEG-2 AAC, forming the
basis of the MPEG-4 audio compression technology. The file
format and extension used depend on the application used to
encode the AAC file. This receiver plays back AAC files
encoded by iTunes
®
bearing the extension ‘.m4a’. DRM-
protected files will not play, and files encoded with some
versions of iTunes
®
may not play.
Apple and iTunes are trademarks of Apple Inc., registered in the
U.S. and other countries.
About WMA
WMA is an acronym for Windows Media Audio and refers to
an audio compression technology developed by Microsoft
Corporation. This receiver plays back WMA files encoded
using Windows Media
®
Player bearing the extension ‘.wma’.
Note that DRM-protected files will not play, and files encoded
with some versions of Windows Media
®
Player may not play.

Manuale

Consulta qui gratuitamente il manuale per il Pioneer VSX-522. Il manuale rientra nella categoria Ricevitore ed è stato valutato da 19 persone con una media di 8.5. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Pioneer VSX-522 o hai bisogno di aiuto? Fai la tua domanda qui

Indice

Ho bisogno di aiuto?

Hai una domanda relativa a Pioneer VSX-522 e la risposta non è nel manuale? Fai qui la tua domanda Fornisci una descrizione chiara e completa del problema e della tua domanda. Migliore sarà la descrizione del tuo problema e della domanda, più facile sarà per gli altri proprietari di Pioneer VSX-522 fornirti una buona risposta.

Numero di domande: 0

Specifiche Pioneer VSX-522

Di seguito troverai le specifiche del prodotto e le specifiche del manuale di Pioneer VSX-522.

Generale
Marca Pioneer
Modello VSX-522
Prodotto Ricevitori
EAN 0884938163545
Lingua Inglese
Tipo di file Manuale d'uso (PDF)

Domande frequenti

Non riesci a trovare la risposta alla tua domanda nel manuale? Puoi trovare la risposta alla tua domanda nelle FAQ sul Pioneer VSX-522 che trovi di seguito.

La tua domanda non è elencata? Fai la tua domanda qui

Nessun risultato