Pyle PLMRA430BT manuale

  • Numero di pagine: 26
  • Tipo di file: PDF
  • Elite Series Waterproof Amplifiers
    If the unit is likely to undergo excess vibration through use, your must properly install the unit securely. Damage
    caused by insufficient support is not covered by the warranty. To prevent damage to the unit's panels, always
    use protective plastic cups or washers before tightening mounting bolts.
    PLEASE NOTE: Users must ensure that any type of smoke and related substances are not allowed to
    enter the amplifier. Smokey air is corrosive and prolonged exposure will cause irreparable damage to
    your amplifier. Take precaution before reconnecting to a power supply. Be aware that when any
    equipment is taken from a cold to humid location, condensation may occur inside. Always allow time
    for the equipment to attain the same temperature as its environment before reconnecting to a
    power supply.
    Read these instructions and keep them for future reference.
    Carefully follow instructions and follow directions carefully.
    Keep the amplifier dry, as some liquids may contain minerals that corrode electronics circuitry.
    Clean amplifier housing only with a slightly damp cloth. No chemicals or solutions.
    Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
    Do not install near any heat source such as radiators, stoves, or other electrical devices that produce heat.
    Prevent any cables, wired or power cord from being walked on, bent, stretched or pinched, particularly at
    the plug or at the point where connects to the amplifier.
    When uncertain about specifications, please first consult the Pyle Audio website and see the FAQs.
    Ensure this unit is placed on a stable and flat surface and can accommodate the weight of this unit.
    Unplug this unit during lightning storms or when it is unused for an extended period of time.
    Do not leave this device unattended when powered on.
    Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged
    or malfunctions in any manner. This would include damage to the power supply cord or plug.
    Service may be obtained from an authorized Pyle Audio service center. Contact Pyle Audio and
    make sure you have a receipt as proof of purchase along with the defective unit. You will be then
    instructed to send or deliver the malfunctioning unit to an authorized center. They will handle the
    necessary paperwork and repair. Remember to transport your unit in the original factory packaging.

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Pyle PLMRA430BT o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Pyle PLMRA430BT rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Pyle PLMRA430BT. Il manuale rientra nella categoria Ricevitore ed è stato valutato da 1 persone con una media di 7.5. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Pyle PLMRA430BT o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Pyle PLMRA430BT

Marca Pyle
Modello PLMRA430BT
Prodotto Ricevitori
EAN 68888759311
Lingua Inglese
Tipo di file PDF
Picco massimo per canale 1000 W
Sistema audio - canali
Classe dell'amplificatore A/B
Distorsione armonica totale (THD) 0.04 %
Rapporto segnale/rumore (SNR) 95 dB
Bass boost 0 - 18 dB
Impedenza ingresso 10000 Ω
Sensibilità ingresso 250 mV
Dettagli tecnici
Interrutore On/Off
Quantità di canali 4 canali
Colore del prodotto Black,Blue
Utilizzo Barca
Tecnologia di connessione Con cavo e senza cavo
Controllo del volume Manopola
Gestione energetica
Voltaggio input DC 12 V
Tipo di connettività degli altoparlanti RCA
Indicatori LED
Dimensioni e peso
Larghezza 276.86 mm
Profondità 304.8 mm
Altezza 68.5 mm

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Pyle PLMRA430BT .

La tua domanda non è elencata? Fai la tua domanda qui