Siemens SR 26T291 manuale
6.7 · 1
Manuale
Consulta qui gratuitamente il manuale per il Siemens SR 26T291. Il manuale rientra nella categoria Lavastoviglie ed è stato valutato da 1 persone con una media di 6.7. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Siemens SR 26T291 o hai bisogno di aiuto? Fai la tua domanda qui
Indice
- *9000870123*
- 9000870123 en (9302) 440MG
- ( Safety instructions 4
- 7 Protection of the environment 8
- * Getting to know your appliance 9
- + Water softening system/ Special salt 10
- , Rinse aid 11
- - Utensils 13
- . Detergent 16
- / Overview of programmes 18
- 0 Additional options 19
- 1 Operating the appliance 20
- 2 Cleaning and maintenance 23
- 3 Fault, what to do? 25
- 4 Customer service 34
- 5 Installation and connection 34
- 8 Intended use
- Intended use
- ( Safety instructions
- Children from 8 years of age or people whose physical, sensory or mental abilities or their lack of experience or knowledge prevent them from using the appliance safely must not use this appliance without supervision or instruction by a responsible p...
- Please read the operating and installation instructions carefully. They contain important information on how to install, use and maintain the appliance.
- Retain all documents for subsequent use or for the next owner.
- Delivery
- Installation
- In daily use
- Childproof lock (door lock)Door lock *
- Childproof lock (button lock)Button lock
- You can secure your appliance from being unintentionally the programme terminated (e.g. improper operation by children).
- Activating the button lock:
- If any button is pressed while the programme is running, this ’– is indicated on the digital display. It is not possible to end (Reset) the programme.
- Deactivating the button lock:
- When the programme ends (‹:‹‹ on the digital display), the button lock is cancelled. If there is a power failure, the button lock is retained. Whenever a programme is restarted, the button lock must be reactivated.
- You can secure your appliance from being unintentionally the programme terminated (e.g. improper operation by children).
- Damage
- Disposal
- 7 Protection of the environment
- Protection of the environment
- Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials.
- Please dispose of the individual parts separated according to type.
- Please ask your dealer or inquire at your local authority about current means of disposal.
- All plastic parts of the appliance are identified with internationally standardised abbreviations (e.g. >PS< polystyrene). Therefore, plastic waste can be sorted out when the appliance is being disposed of.
- Please follow the safety instructions under “Delivery”.
- Old appliances
- Protection of the environment
- * Getting to know your appliance
- Getting to know your appliance
- Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front.
- Individual positions are referred to in the text.
- ON/OFF switch
- Programme buttons **
- Display “Check water supply”
- Salt refill indicator
- Rinse aid refill indicator
- Door opener
- Timer programming *
- Additional options **
- START button
- Programme sequence indicator
- Digital display
- * depending on model
- ** Number depending on model
- Appliance interior
- Overview of menu
- Getting to know your appliance
- + Water softening system/Special salt
- Water softening system/Special salt
- To ensure good washing results, the dishwasher requires soft water, i.e. containing low amounts of lime, otherwise white limescale will be deposited on the utensils and inner container.
- Tap water above 1.2 mmol/l must be softened. The water is softened with special salt (regeneration salt) in the water softening system of the dishwasher.
- The setting and therefore the required amount of salt depends on the degree of hardness of your tap water (see table).
- The amount of salt dispensed can be set from •:‹‹ to •:‹ˆ.
- Salt is not required at the set value •:‹‹.
- Water hardness table
- Using special salt
- Using detergents with salt componentDetergents with salt component
- Switching off salt refill indicator/water softening systemSwitching off water softening system
- Water softening system/Special salt
- , Rinse aid
- Rinse aid
- As soon as the rinse-aid refill indicator H is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes. Refill with rinse aid.
- The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers.
- Combined detergents with rinse-aid component may be used up to a water hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l) only. If the water hardness is over 21° dH, rinse aid must be used.
- The amount of rinse aid can be set from §:‹‹ to §:‹‡. Please set rinse aid on §:‹… to obtain very good drying results (§:‹… is already set in factory).
- Do not change the amount of rinse aid unless streaks (select lower setting) or water stains (select higher setting) are left on the utensils.
- Switching off rinse aid refill indicator
- Rinse aid
- - Utensils
- Utensils
- Not suitable
- Aluminium and silver parts have a tendency to discolour and fade during the wash cycle. Even some types of glass (e.g. crystal glass objects) may turn cloudy after many wash cycles.
- Glass and utensil damage
- Loading the dishwasher
- Unloading the dishwasher
- To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up.
- Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled.
- To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up.
- Cups and glasses
- Pans
- Cutlery drawer
- Folding spikesFolding spikes *
- Small accessories holder *Small accessories holder
- Adjusting the height of the basket
- The height of the upper utensils basket 12 can be adjusted in 3 stages to create more space either in the upper or lower basket.
- Appliance height 81.5 cm
- 14 cm
- 30 cm
- 16 cm
- 28 cm
- 19 cm
- 25 cm
- 1. Pull out the top basket 12 out.
- 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping.
- 3. To raise the basket, hold the basket on the sides of the upper edge and lift it up.
- 4. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit.
- 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping.
- Appliance height 81.5 cm
- Utensils
- . Detergent
- Detergent
- You can use tablets as well as powder or liquid detergents for dishwashers, but never use washing up liquid. The dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling. Tablets contain an adequately l...
- Adding detergent
- Combination detergent
- Apart from conventional detergents (Solo), a number of products are offered with additional functions. These products contain not only the detergent but also rinse-aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5i...
- As soon as combined detergents are used, the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result.
- Apart from conventional detergents (Solo), a number of products are offered with additional functions. These products contain not only the detergent but also rinse-aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5i...
- Detergent
- Intended use
- / Overview of programmes
- Overview of programmes
- The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia.
- Programme selection
- Information for test institutes
- Test institutes receive the information for comparability tests (e.g. according to EN60436).
- These are the conditions for conducting the tests, however these are not the results or consumption values.
- Request by e-mail to:
- dishwasher@test-appliances.com
- The product number (E no.) and the production number (FD) are required which you can find on the rating plate 92 on the appliance door.
- Test institutes receive the information for comparability tests (e.g. according to EN60436).
- 0 Additional options
- Additional options
- * depending on model
- Additional options can be set with the buttons `.
- This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display )*. To obtain optimum cleaning results at a reduced running time, water and ...
- Half load§ Half load *
- · Hygiene *Hygiene
- Ï Intensive zone *Intensive zone
- ¿ Extra drying *Extra drying
- Additional options
- 1 Operating the appliance
- Operating the appliance
- Programme data
- The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result...
- Aqua sensorAqua sensor *
- * depending on model
- The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.
- The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drai...
- * depending on model
- Switching on the appliance
- Programme sequence indicatorProgramme sequence indicator )"
- Remaining running time display
- When the programme is selected, the remaining running time of the programme is indicated on the digital display )*.
- The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme).
- When the programme is selected, the remaining running time of the programme is indicated on the digital display )*.
- Timer programmingTimer programming *
- * depending on model
- You can delay the start of the programme in 1-hour steps up to 24 hours.
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Press button X + until the digital display )* jumps to œ:‹‚.
- 4. Press X + or – button until the displayed time corresponds with your requirements.
- 5. Press START button h, timer programming is activated.
- 6. To delete timer programming, press the X + or – button until )* œ:‹‹ is indicated on the digital display.
- 2. Switch on ON/OFF switch (.
- * depending on model
- End of programme
- Automatic switch off after end of programme or interior light*Automatic switch off / interior light
- * depending on model
- To save energy, the dishwasher can be automatically switched off 1 min or 120 min after the programme ends.
- The setting can be selected from ˜:‹‹ to ˜:‹ƒ.
- Appliance does not switch off automatically.
- The interior light 1" comes on when the door is opened irrespective of whether the ON/OFF switch ( is switched on or off. When the door is closed the light is off. If the door is open for longer than 60 min., the light switches off automatically. The...
- Appliance switches off after 1 min.
- Appliance switches off after 120 min.
- * depending on model
- Switching off the appliance
- Interrupting the programme
- Terminating the programmeTerminating the programme (Reset)
- Changing the programme
- Intensive drying
- Operating the appliance
- 2 Cleaning and maintenance
- Cleaning and maintenance
- A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems.
- If you find such deposits:
- Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers.
- Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any consequential damage.
- Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces.
- Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time.
- Special salt and rinse aid
- Filters
- Spray arms
- Cleaning and maintenance
- 3 Fault, what to do?
- Fault, what to do?
- Experience has shown that you can rectify most faults which occur in daily operation yourself. This ensures that the machine is quickly available to you again. In the following overview you can find possible causes of malfunctions and helpful informa...
- Waste water pump
- Large food remnants or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.
- In this case:
- 1. First always disconnect the appliance from the power supply.
- 2. Take out top basket 12 and bottom basket 1b.
- 3. Remove the filters 1Z.
- 4. Scoop out water, use a sponge if required.
- 5. Prise out the white pump cover (as illustrated) using a spoon. Grip the cover on the crosspiece and lift diagonally inwards. Remove cover completely.
- 6. Check impeller wheel and remove any foreign objects.
- 7. Place cover in the original position and press down until it engages (click).
- 8. Install filters.
- 9. Re-insert baskets.
- Fault table
- 2. Take out top basket 12 and bottom basket 1b.
- Large food remnants or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.
- Fault, what to do?
- 4 Customer service
- Customer service
- If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be found on the back of these...
- Rely on the competence of the manufa cturer. Contact us. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts for your domestic appliances.
- Customer service
- 5 Installation and connection
- Installation and connection
- The dishwasher must be connected correctly, otherwise it will not function properly. The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragr...
- Install the appliance in the correct sequence:
- If you have any complaints, contact the dealer where you purchased the appliance or our customer service.
- * depending on model
- Safety instructions
- Delivery
- Technical specifications
- Weight:
- max. 45 kg
- Voltage:
- 220–240 V, 50 Hz or 60 Hz
- Connected load:
- 2.0–2.4 kW
- Fuse:
- 10/16 A (UK 13A)
- Power input:
- switched off 0.1 W
- not switched off 0.1 W
- Water pressure:
- at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.
- Inlet rate:
- minimum 10 litres/minute
- Water temperature:
- cold water; hot water max. temperature 60 °C.
- Weight:
- Installation
- Waste-water connection
- Fresh water connection
- 1. Connect the fresh-water connection to the tap according to the installation instructions with the enclosed parts.
- Water pressure:
- at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.
- Inlet rate:
- minimum 10 litres/minute
- Water temperature:
- cold water preferred; hot water max. temperature 60 °C.
- Warm water connection *Warm water connection
- * depending on model
- The dishwasher can be connected to cold or hot water up to max. 60 °C.
- Connection to hot water is recommended if the hot water can be supplied by energetically favourable means and from a suitable installation, e.g. solar heating system with circulation line.
- This will save energy and time.
- The hot water setting ‘:‹‚ allows you to adjust your appliance optimally to operation with hot water.
- It is recommended to have a water temperature (temperature of the incoming water) of at least 40 °C and no more than 60 °C.
- It is not recommended to connect the appliance to hot water if the water is supplied from an electric boiler.
- * depending on model
- Electrical connection
- Removing the appliance
- Transportation
- Empty the dishwasher and secure loose parts.
- Drain the appliance according to the following steps:
- 1. Turn on the tap.
- 2. Close the door.
- 3. Switch on ON/OFF switch (.
- 4. Select programme with the highest temperature.
- 5. Press START button h.
- 6. After approx. 4 minutes press the START button h until ‹:‹‚ is indicated on the digital display.
- 7. Switch off ON/OFF switch (.
- 8. Turn off the tap, disconnect supply hose and drain water.
- 2. Close the door.
- Drain the appliance according to the following steps:
- Transport appliance upright only.
- (This prevents residual water from running into the machine control and damaging the programme sequence.)
- Protection against frostProtection against frost (Emptying the appliance)
- Installation and connection
- Overview of programmes
- *9000870123*
- 9000870123 en (9302) 440MG
Specifiche Siemens SR 26T291
Di seguito troverai le specifiche del prodotto e le specifiche del manuale di Siemens SR 26T291.
Generale
| Marca | Siemens |
| Modello | SR 26T291 |
| Prodotto | Lavastoviglie |
| Lingua | Inglese |
| Tipo di file | Manuale d'uso (PDF) |
Domande frequenti
Non riesci a trovare la risposta alla tua domanda nel manuale? Puoi trovare la risposta alla tua domanda nelle FAQ sul Siemens SR 26T291 che trovi di seguito.
Cosa devo fare con una lavastoviglie puzzolente?
Con una lavastoviglie puzzolente, si può intervenire come in seguito:
- Pulire i filtri
- Pulire i bracci di spruzzo
- Pulire le gomme della porta
- Eseguire un programma di lavaggio caldo
- Accendere la macchina vuota con un detergente per lavastoviglie.
Si deve risciacquare i piatti?
Si sconsiglia di sciacquare i piatti sporchi prima di metterli nelle lavastoviglie.
Per il ciclo vitale della macchina, è meglio mettere tutto sporco in lavastoviglie.
Il grasso sui piatti sporchi è il lubrificante per la pompa della macchina.
Quanto detersivo per piatti devo usare?
La quantità mediocre utilizzata è di circa 25 grammi di detersivo per piatti. Si consiglia di seguire le indicazioni riportate sulla confezione.
Come si riempie il sale ammorbidente nella lavastoviglie?
Ogni lavastoviglie ha uno scomparto separato per il sale ammorbidente. Si apre ruotando la manopola dello scomparto. Il sale ammorbidente può poi essere versato nello scomparto con l'aiuto di un imbuto.
Il manuale del Siemens SR 26T291 è disponibile in Italiano?
Sfortunatamente, il manuale per il Siemens SR 26T291 non è disponibile in Italiano. Il presente manuale è disponibile in Inglese.
La tua domanda non è elencata? Fai la tua domanda qui
Nessun risultato
Ho bisogno di aiuto?
Hai una domanda relativa a Siemens SR 26T291 e la risposta non è nel manuale? Fai qui la tua domanda Fornisci una descrizione chiara e completa del problema e della tua domanda. Migliore sarà la descrizione del tuo problema e della domanda, più facile sarà per gli altri proprietari di Siemens SR 26T291 fornirti una buona risposta.
Numero di domande: 0