Sony DS11iP manuale

Sony DS11iP
  • Numero di pagine: 2
  • Tipo di file: PDF
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned
The nameplate and important information concerning safety are located on the bottom exterior.CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with the same type.Notice for customers: the following information is only applicable to equipment sold in countries applying EU directivesThe manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Operate the unit on the power source specified in “Specifications.”
Since a strong magnet is used for the speaker, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet.
Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc.) or near materials (a curtain) which might block the ventilation holes.
Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.
To clean the casing, use a soft cloth dampened with a mild detergent solution.
Never touch the wire of the external FM aerial during a thunderstorm. Furthermore, immediately disconnect the AC power cord from the radio.NOTES ON LITHIUM BATTERY
Wipe the battery with a dry cloth to assure a good contact.
Be sure to observe the correct polarity when installing the battery.
Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.Applicable accessory: Remote Commander.Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.
Compatible with iPod/iPhone
Wake or Sleep to iPod/Radio/Buzzer
Easy to set A-B alarm
2-5-7day alarm
LCD Brightness control
MEGA Xpand
Wireless Remote Commander
Time display24-hour systemSection for iPodDC out: 5VMAX: 500mARadio sectionFrequency rangeBand Frequency Channel
FM 87.5 MHz – 108 MHz 0.05 MHzAM 531 kHz – 1 602 kHz 9 kHzGeneralSpeakerApprox. 5.7 cm (2
inches) dia. 6 ΩInputAUDIO IN jack (ø 3.5 mm stereo minijack)Power output3.5 W + 3.5 W (at 10% harmonic distortion)Power requirements230 V AC, 50 HzFor clock back up: 3V DC, CR2032 battery (1)DimensionsApprox. 290.5 mm × 152.0 mm × 139.5 mm (w/h/d)
inches × 5
inches × 5
inches) including projecting parts and controls
Approx. 2.0 kg (4 lb 7 oz) including power supply
Supplied accessoriesRemote commander (1)AM loop aerial (1)Audio connecting cable (1)Universal Dock Adapter for iPhone (1)Universal Dock Adapter for iPhone 3G & iPhone 3GS (1) Universal Dock Adapter for iPhone 4 (1)Design and specifications are subject to change without notice.Compatible iPod/iPhone modelsCompatible iPod/iPhone models are as follows. Update your iPod/iPhone to use the latest software before you use it.
iPod touch
1st generation
iPod nano
3rd generation
5th generation
iPod classic
iPhone 3GS
iPod touch
3rd generation
iPod nano
5th generation
(video camera)
iPod nano
2nd generation
4th generation
(color display)
iPod mini
iPhone 3G
iPod touch
2nd generation
iPod nano
4th generation
iPod nano
1st generation
4th generation
iPhone 4
In these Operating Instructions, “iPod” is used as a general reference to functions of iPod on an iPod or iPhone, unless otherwise specified by the text or illustrations.
The connector of the unit is for sole use with an iPod. If you use devices that do not match with the connector, connect to the AUDIO IN jack of this unit with the supplied audio connecting cable.
Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using an iPod connected to this unit.
Should any problem persist after you have made the following checks, consult your nearest Sony dealer.The clock flashes “0:00” due to a power interruption.
The battery is low. Replace the battery. Remove the old battery and install a new one.The alarm of radio, iPod or buzzer does not sound at the preset alarm time.
Check that alarm “A” or alarm “B” is properly displayed. The alarm of radio or iPod is activated but no sound comes on at the preset alarm time.
Check the alarm volume setting.There is no sound from the iPod.
Make sure the iPod is securely connected.
Adjust the VOLUME.The iPod cannot be operated with this unit.
Make sure the iPod is securely connected.The iPod cannot be charged.
Make sure the iPod is securely connected.4-150-697-42(1)Notes
Do not attempt to charge the battery.
If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion.
About the backup
To keep accurate time, this unit contains a CR2032 battery as a backup power source.The battery keeps the clock and the alarm operating in the event of a power interruption.Note for customers in EuropeThe clock is preset at the factory, and its memory is powered by the preinstalled Sony CR2032 battery. If the “0:00” appears in the display when the unit is connected to AC outlet for the first time, the battery may be weak. In this case, consult a Sony dealer. The preinstalled CR2032 battery is considered part of the product, and is covered by the warranty. You are required to show “Note for customers in Europe” (in this instruction) to a Sony dealer in order to validate the warranty for this product.To know when to replace the batteryWhen the battery becomes weak, “” appears in the display.If a power interruption occurs while the battery is weak, the current time and alarm will be erased.Replace the battery with a Sony CR2032 lithium battery. Use of another battery may cause a fire or explosion.To replace the battery1 Keep the AC plug connected to the AC outlet, remove the screw that secures the battery compartment lid at the bottom of the unit using a screwdriver, and open the lid (see Fig. ).2 Insert a new battery in the battery compartment with the side facing up (see Fig. ).3 Close the battery compartment lid and secure it with the screw (see Fig. ).
4 Press iPod & iPhone , RADIO
BAND, AUDIO IN or SNOOZE/DATE/SLEEP OFF to turn “” off in the display.
When you replace the battery, do not disconnect the plug from the AC outlet. Otherwise, the calendar, current time, alarm and station presets will be erased.
Reset buttonCR2032When Daylight Saving Time (summer time) begins, the clock does not employ the Daylight Saving Time automatically.
Make sure the clock is set correctly.
Press and hold CLOCK and SNOOZE/DATE/SLEEP OFF simultaneously for at least 2 seconds to activate the Automatic DST function.
Connecting the aerial
To connect the AM loop aerialThe shape and the length of the aerial is designed to receive AM signals. Do not dismantle or roll up the aerial.1 Remove only the loop part from the plastic stand.2 Set up the AM loop aerial.3 Insert the AM aerial terminal into the AM ANTENNA jack on the rear of the unit.To remove the AM loop aerialPull the AM aerial terminal while pushing up the terminal clamp.Adjusting the AM loop aerialFind a place and an orientation that provide good reception.
Do not place the AM loop aerial near the unit or other AV equipment, as noise may result.
Adjust the direction of the AM loop aerial for best AM broadcast sound.
Preparing the remote
Before using the remote commander for the first time, remove the insulation film.To know when to replace the battery With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with a new one.CR2025
If the time in the display is incorrect after the battery is changed (Reset)Press the reset button with a pointed device. The reset button is in the small hole located in the battery compartment (see Fig. ). ©2010 Sony Corporation Printed in China

Personal Audio

Docking System

Operating Instructions


Sony DS11iP

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Sony DS11iP o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Sony DS11iP rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Sony DS11iP. Il manuale rientra nella categoria Postazione di ricarica ed è stato valutato da 1 persone con una media di 7.5. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Sony DS11iP o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Sony DS11iP

Marca Sony
Modello DS11iP
Prodotto Postazioni di ricarica
EAN 5704327838494
Lingua Inglese
Tipo di file PDF
Sistema audio 2.0 canali
Potenza in uscita (RMS) 7 W
Range di frequenza - Hz
Diametro dell'unità 57 mm
Connessione cuffia -
Bluetooth No
Jack DC-in
Radio FM
Quantità stazioni preimpostate 30
Bande del sintonizzatore AM,FM
Tipologia display LCD
Altre caratteristiche
Visualizzazione Ora/Data
Dimensioni (LxPxA) 290.5 x 139.5 x 152 mm
Controllo luminosità
Riproduzione MP3
Compatibilità per i dock di Apple iPhone,iPod
Controllo livello dei bassi
Funzione snooze
Timer di spegnimento
Equalizzatore -
Gestione energetica
Caricatore incorporato
Tipologia alimentazione AC,Battery
Numero di batterie 1
Batteria inclusa
Tensione di ingresso AC 230 V
Frequenza di ingresso AC 50 Hz
Tipo batteria CR2032
Voltaggio della batteria 3 V
Controllo del volume Digitale
Colore del prodotto Nero
Dimensioni e peso
Peso 2000 g
Profondità 139.5 mm
Altezza 152 mm
Larghezza 290.5 mm
Contenuto dell'imballo
Batterie incluse
Mostra di più

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Sony DS11iP .

La tua domanda non è elencata? Fai la tua domanda qui