Sony MDR-RF810RK manuale

Sony MDR-RF810RK
7.4 · 2
PDF manuale
 · 2 pagine
Inglese
manualeSony MDR-RF810RK

Wireless Stereo

Headphone System

4-170-753-14(1)

Welcome!

Thank you for purchasing the Sony MDR-RF810RK
Wireless Stereo Headphone System. Before operating the
unit, please read this manual thoroughly and retain it for
future reference.
Some features are:
Wireless system that allows you to listen to a programme
free from the restriction of a cord.
High fidelity sound reproduction.
13 hours of continuous use with supplied rechargeable
battery.
Easy connection with TV and HiFi Audio system
equipment.
Up to 100 metres reception range.
Volume control function on the headphones.

Notes on receiving

performance

This system utilises very high frequency signals in the 800
MHz band so the receiving performance may deteriorate
due to the surroundings. The following examples illustrate
conditions that may reduce the reception range or cause
interference.
Inside a building with walls containing steel beams.
An area with many steel file cabinets, etc.
An area with many electrical appliances capable of
generating electromagnetic fields.
The transmitter is placed on a metal instrument.
An area facing a roadway.
Noise or interfering signals exist in the surroundings due
to radio transceivers in trucks, etc.
Noise or interfering signals exist in the surroundings
owing to wireless communication systems installed along
roadways.
Getting started

Unpacking

Check that you have the following items:
The headphones (1)
The transmitter (1)
Note
If the aerial cover come off from the transmitter, put the cover back
into the transmitter.
AC power adaptor (1)
Rechargeable nickel-metal hydride battery BP-HP550-11 (1)
Card warranty (1)
Operating Instructions (1)

English

WARNING

To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the apparatus.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
As the main plug of AC power adaptor is used to disconnect
the AC power adaptor from the mains, connect it to an
easily accessible AC outlet. Should you notice an
abnormality in it, disconnect it from the AC outlet
immediately.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Do not expose batteries or apparatus with battery-installed
to excessive heat such as sunshine fire or the like.
Trademark, manufacturer and model number are located on
the bottom of the unit.
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Hereby, Sony Corp. declares that this equipment is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. For details,
please access the following URL:
http://www.compliance.sony.de/
Disposal of Old Electrical & Electronic
Equipment (Applicable in the
European Union and other European
countries with separate collection
systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for
the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of
this product, please contact your local Civic Office, your
household waste disposal service or the shop where you
purchased the product.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical symbols
for mercury (Hg) or lead (Pb) are added if the battery
contains more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for the
environment and human health which could otherwise be
caused by inappropriate waste handling of the battery. The
recycling of the materials will help to conserve natural
resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated properly, hand over
the product at end-of-life to the applicable collection point
for the recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to
remove the battery from the product safely. Hand the battery
over to the applicable collection point for the recycling of
waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
Notice for customers: the following information is only
applicable to equipment sold in countries applying EU
directives
The manufacturer of this product is Sony Corporation, 1-7-
1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized
Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters please refer
to the addresses given in separate service or guarantee
documents.

Charging the supplied

rechargeable battery

The supplied rechargeable nickel-metal hydride battery is
not charged from the first time you use them. Charge them
before use.
To charge the battery, connect the CHARGE plug of the
transmitter to the headphones.
1 Remove the battery compartment lid on the left
housing of the headphones.
There are tactile dots on the upper side of the lid and the
housing to check the position of the lid. Press and turn
the lid counter-clockwise with your palm so that the dot
on the lid aligns with the left side dot of the housing.
Incline the headphones to drop the cover off the
housing.
2 Insert the supplied rechargeable nickel-metal
hydride battery into the battery compartment,
matching the
terminals on the battery to the
marks in the compartment.
Do not use rechargeable battery other than the supplied
ones.
3 Close the battery compartment lid.
Press and turn the lid clockwise with your palm so that
the tactile dot on the lid matches to right side dot of the
housing.
4 Connect the supplied AC power adaptor to the
transmitter.
CHARGEINPUT
CHANNEL
DC IN 12V
ATT
OdB
6dB
1 2
DC OUT 6.2V
150mA MAX
Transmitter
To DC IN 12V jack
To an AC
outlet
AC power adaptor
(supplied)
5 Make sure to set the switch located on the left
housing to OFF. After that, connect the CHARGE
plug of the transmitter to jack located on the left
housing.
POWER indicator located on the transmitter lights up
red. Prior to using for the first time, charge the
rechargeable battery until the POWER indicator (red)
turns off (approximately 16 hours). From the next time,
charging time to the full charge will be almost equal to
the previous operating time. Regardless of remaining
battery charge, the POWER indicator (red) will turn off
approximately 16 hours after charging starts.
ON
CHG
OFF
Transmitter
Headphones
CHARGE plug
When the transmitter’s POWER indicator does not light up red
Check if the switch on the left housing of the headphones is
set to OFF. If the switch is set to ON, the POWER indicator
does not light up.
You cannot charge any rechargeable battery or dry-cell
battery other than the supplied battery.
To recharge the headphone battery after use
Connect the headphones to the CHARGE plug of the
transmitter in the same manner as described in step 5 of
Charging the supplied rechargeable battery” after use. Since
the built-in timer recognises when charging is complete,
there is no need to remove the headphones from the
transmitter after charging.
Notes
Do not connect the CHARGE plug to anything other than these
headphones.
The transmitter automatically stops sending RF signals while
charging the battery.
This system is designed to charge only the supplied rechargeable
battery type BP-HP550-11 for safety. Note that other types of
rechargeable battery cannot be charged with this system.
If dry-cell batteries are installed, they cannot be charged.
Do not attempt to use the supplied BP-HP550-11 rechargeable
battery for other components. They are for use with this system
only.
Charge in an environmental temperature of between 0 °C and 40 °C
(between 32 °F and 104 °F).
Charging and usage hours
Approx. charging hours Approx. usage time*
1
1 hour 45 minutes*
3
16 hours*
2
13 hours*
3
*
1
at 1 kHz, 1 mW+1 mW output.
*
2
hours required to fully charge empty battery.
*
3
Time stated above may vary, depending on the temperature or
conditions of use.
Using the headphones with dry-cell batteries (sold separately)
Commercially available (size AAA) dry-cell batteries can
also be used to power the headphones. Install the batteries
in the same manner as described in steps 1 through 3 of
Charging the supplied rechargeable battery.
When dry-cell batteries are installed, the battery charge
function will not be activated.
Battery life
Battery Approx. hours*
1
Sony alkaline batteries
LR03/AM-4(N)
28 hours*
2
*
1
at 1 kHz, 1 mW+1 mW output
*
2
Time stated above may vary, depending on the temperature or
conditions of use.
Notes on Batteries
Do not charge a dry-cell battery.
Do not carry a dry-cell battery together with coins or other metallic
objects. It can generate heat if the positive and negative terminals of
the battery accidentally come into contact with metallic objects.
If you are not going to use the unit for a long time, remove the
batteries to avoid damage from battery leakage or corrosion.
Checking the remaining battery power
Turn on the switch located on the left housing of the
headphone, and check the POWER indicator located on the
left housing. The battery are still serviceable when the
indicator lights up red.
Charge the rechargeable battery or install new dry-cell
batteries if the POWER indicator light dims, flashes, or the
sound becomes distorted or noisy.
Note
The rechargeable nickel-metal hydride battery should be replaced
with new ones when they last only half the expected time after a
proper recharging. The rechargeable battery type BP-HP550-11 are
not commercially available. You can order the battery from the store
where you purchased this system, or at your nearest Sony dealer.

Setting up the transmitter

1 Connect the transmitter to audio/video
equipment.
CHARGEINPUT
DC IN 12V
DC OUT 6.2V
150mA MAX
ATT
OdB
6dB
CHANNEL
1 2
Transmitter
To headphones jack (Stereo mini jack),
LINE OUT or REC OUT jacks
Connecting cord
WALKMAN®*, TV, etc.
* “WALKMAN” and “WALKMAN” logo are registered trademarks
of Sony Coporation.
2 Connect the supplied AC power adaptor to the
transmitter.
CHARGEINPUT
DC IN 12V
ATT
OdB
6dB
CHANNEL
1 2
DC OUT 6.2V
150mA MAX
Transmitter
AC power adaptor
(supplied)
To an AC
outlet
To DC IN 12V jack
Notes
Use only the supplied AC power adaptor. Do not use any other AC
power adaptor.
Polarity of the plug
When the transmitter is placed on or near a TV, it may pick up a
noise. In such a case, place the transmitter away from the TV.
If the connected equipment has the AVLS (Automatic Volume
Limiter System) function, be sure to turn the function off when
using the transmitter. Otherwise, you will have to turn up the
volume of the headphones, and that may cause noise.
Do not lift the transmitter by the aerial. The aerial cover may
become detached. If it becomes detached, attach it back where it
was before.
Aerial cover
Setting the input level
If the volume is high using the analogue input, set the ATT
(attenuator) switch to “–6 dB.
INPUT
ATT
OdB
6dB
Setting Connected components
0 dB TV, portable components, and other components with a
low output level (initial settings)
–6 dB Other components
Notes
Be sure to lower the volume before setting the ATT switch.
If audio input is distorted (sometimes, noise can be heard at the
same time), set the ATT switch to “–6 dB.
Operating the system

Listening to a programme

Before listening
To reduce the risk of hearing damage, first lower the volume.
1 Turn on the audio/video equipment connected to
the transmitter.
If the transmitter is connected to the headphone jack, set
the volume control of the audio source equipment as
high as possible but not so high that the audio signal
becomes distorted.
2 Disconnect the CHARGE plug from the
headphones.
The transmitter’s POWER indicator lights up green.
CHG
Transmitter
Headphones
CHARGE plug
3 Select the radio frequency with the CHANNEL
selector switch.
CHANNELDC IN 12V1 2
4 Turn on the switch on the left housing of the
headphones.
Check if the power indicator on the left housing lights
up red. Place the right housing on your right ear and
the left housing on your left ear.
There is a tactile dot on the hanger marked to
distinguish the left side.
ON POWER
OFF
5 Select the channel to that of the transmitter with
the switch on the right housing of the headphones.
Turn up the volume to a moderate level with the
VOLUME control on the left housing.
2CH1CH
VOLUME
Sending RF signals from the transmitter
The transmitter starts sending RF signals automatically
when it detects an audio signal from the connected
equipment.
If the transmitter does not detect an audio signal for more
than about 4 minutes, it will stop sending RF signals, and
the POWER indicator will blink for 1 minute, and then turn
off.
When the transmitter receives an audio signal again, it starts
sending the RF signals, and the POWER indicator will light
up green again.
You may not hear the beginning of the sound from the
headphones until the transmitter starts sending the RF
signals after detecting an audio signal.
RF signal transmission may stop when an extremely low
sound is input for about 4 minutes. If this happens, raise
the volume of the connected AV component within the
range where the sound is not distorted, and lower the
volume of the headphones.
Notes
If hiss is heard, move closer to the transmitter.
You may hear some noise when you disconnect the AC power
adaptor from the transmitter before turn off the headphones.

The effective areas of the

transmitter

The optimum distance is up to approximately 100 m without
the system picking up some interference. However, the
distance may vary depending on the surroundings and
environment. If the system picks up some noise within the
above mentioned distance, reduce the distance between the
transmitter unit and the headphones, or select another
channel.
Notes
When you use the headphones inside the effective areas of the
transmitter, the transmitter can be placed in any direction from the
listener.
Even within the signal reception area, there are some spots (dead
spots) where the RF signal cannot be received. This characteristics
is inherent to RF signals, and does not indicate malfunction. By
slightly moving the transmitter, location of the dead spot can be
changed.

Replacing the earpads

The earpads are replaceable. If the earpads become dirty or
worn out, replace them as illustrated below.
The earpad is not commercially available. You can order
replacements from the store where you purchased this
system, or at your nearest Sony dealer.
1 Remove the old earpad by pulling it out of the
groove on the housing.
2 Place the new earpad on the driver unit.
Hang the edge of the earpad on one side of the driver
units groove edge, then turn the edge of earpad around
the driver unit as illustrated below.
When the earpad is securely inserted into the groove,
adjust the earpad to the vertical position.
Additional information

Precautions

If the transmitter is not to be used for a long period of
time, disconnect the AC power adaptor from the AC
outlet by holding the plug. Do not pull on the cord.
Do not leave the wireless stereo headphone system in a
location subject to direct sunlight, heat or moisture.
Notes on headphonesTo reduce the risk of hearing damage
Avoid using headphones at high volume. Hearing experts
advise against continuous, loud and extended play. If you
experience a ringing in your ears, reduce the volume or
discontinue use.
Caring for others
Keep the volume at a moderate level. This will allow you to
hear outside sounds and to be considerate to the people
around you.
If you have any questions or problems concerning the
system that are not covered in this manual, please consult
your nearest Sony dealer.
Be sure to bring the headphones and the transmitter to the
Sony dealer when requiring repair work.
Operating Instructions
Mode d’emploi
©2010 Sony Corporation Printed in China

MDR-RF810RK

Troubleshooting

No sound/Muffled sound
Check the connection of the audio/video equipment or the AC
power adaptor.
Check that the audio/video equipment is turned on.
Turn up the volume on the connected audio/video equipment, if
the transmitter is connected to the headphones jack.
Change the radio frequency with the CHANNEL selector on the
transmitter, then select the same radio frequency with the switch
on the right housing of the headphones.
The mute function is activated.
Use the headphones near the transmitter.
The headphones’ POWER indicator light turns off, dims, flashes,
or sound becomes distorted or noisy.
Charge the rechargeable battery if it is weak, or replace alkaline
batteries with new ones. If the POWER indicator is still off
after charging the battery, take the headphones to a Sony
dealer.
The sound cuts off
The transmitter stops transmitting if low sound or no signal is
input for 4 minutes.
If you connect the transmitter to an AV component using the
headphone jack, raise the volume level on the connected AV
component within the range where the sound is not distorted.
Distortion
If the transmitter is connected to the headphone jack, turn down
the volume on the connected audio/video equipment.
Change the radio frequency with the CHANNEL selector on the
transmitter and the switch on the right housing of the
headphones.
The headphones’ POWER indicator light turns off, dims, flashes,
or sound becomes distorted or noisy.
Charge the rechargeable battery if it is weak, or replace alkaline
batteries with new ones. If the POWER indicator is still off
after charging the battery, take the headphones to a Sony
dealer.
Loud background noise
Move closer to the transmitter. As you move away from the
transmitter, more noise is likely to be heard.
If the transmitter is connected to the headphones jack, turn up
the volume of the connected audio/video equipment.
Change the radio frequency with the CHANNEL selector on the
transmitter, then select the same radio frequency with the switch
on the right housing of the headphones.
The headphones’ POWER indicator light turns off, dims, flashes,
or sound becomes distorted or noisy.
Charge the rechargeable battery if it is weak, or replace alkaline
batteries with new ones. If the POWER indicator is still off
after charging the battery, take the headphones to a Sony
dealer.

Specifications

General
Carrier frequency 863.52 MHz, 864.52 MHz
Channel
Ch1, Ch2
Modulation
FM stereo
Frequency response
20 – 20,000 Hz
Transmitter TMR-RF810R
Power source DC 12 V: supplied AC power
adaptor
Audio input
Stereo mini plug
Dimensions
Approx. 108 × 128 × 108 mm
(4
3
/
8
× 5
1
/
8
× 4
3
/
8
in) (w/h/d)
Mass
Approx. 137 g (4.83 oz)
Rated power consumption
3 W
Headphones MDR-RF810R
Power source Supplied rechargeable nickel-metal
hydride battery BP-HP550-11 or
commercially available (size AAA)
dry-cell batteries
Mass
Approx. 270 g (9.52 oz)
(including the supplied
rechargeable nickel-metal hydride
battery)
Rated power consumption
2 W
Design and specifications are subject to change without
notice.

Manuale

Consulta qui gratuitamente il manuale per il Sony MDR-RF810RK. Il manuale rientra nella categoria Cuffia ed è stato valutato da 2 persone con una media di 7.4. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Sony MDR-RF810RK o hai bisogno di aiuto? Fai la tua domanda qui

Ho bisogno di aiuto?

Hai una domanda relativa a Sony MDR-RF810RK e la risposta non è nel manuale? Fai qui la tua domanda Fornisci una descrizione chiara e completa del problema e della tua domanda. Migliore sarà la descrizione del tuo problema e della domanda, più facile sarà per gli altri proprietari di Sony MDR-RF810RK fornirti una buona risposta.

Numero di domande: 0

Specifiche Sony MDR-RF810RK

Di seguito troverai le specifiche del prodotto e le specifiche del manuale di Sony MDR-RF810RK.

Generale
Marca Sony
Modello MDR-RF810RK | MDRRF810RK
Prodotto Cuffie
EAN 5053460660708, 4905524614190, 5052217076762, 5053959428420
Lingua Inglese
Tipo di file Manuale d'uso (PDF)
Batteria
Durata batteria 28 h
Tempo di ricarica 16 h
Tecnologia batteria Nichel-Metallo Idruro (NiMH)
Tipo batteria Mini Stilo AAA
Auricolari
Unità driver 40 mm
Tipo di magnete Neodimio
Frequenza cuffia 20 - 20000 Hz
Disegno auricolare Circumaurale
Altre caratteristiche
Dimensioni (LxPxA) 108 x 108 x 128 mm
Quantità di canali 2 canali
Connettività
Range wireless 100 m
Tecnologia di connessione Wireless
Dimensioni e peso
Peso 220 g
Prestazione
Tipo di prodotto Cuffie
Utilizzo raccomandato MUSICA
Microfono
Tipo di microfono Non disponibile
Mostra di più

Domande frequenti

Non riesci a trovare la risposta alla tua domanda nel manuale? Puoi trovare la risposta alla tua domanda nelle FAQ sul Sony MDR-RF810RK che trovi di seguito.

La tua domanda non è elencata? Fai la tua domanda qui

Nessun risultato