Sony SNC-CH240 manuale

Sony SNC-CH240
(1)
  • Numero di pagine: 2
  • Tipo di file: PDF
4-174-240-14 (1)

Network Camera

Installation Manual
Before operating the unit, please read this manual thoroughly and retain it for future reference.

SNC-CH140/CH240

Owner’s Record

The model and serial numbers are located on the top. Record these numbers in the spaces provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. Serial No.

WARNING

To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNINGThis installation should be made by a qualified service person and should conform to all local codes.WARNINGA readily accessible disconnect device shall be incorporated in the building installation wiring.WARNING (for Installers only)Instructions for installing the equipment on the ceiling or the wall:After the installation, ensure the connection is capable of supporting at least a force of 50 Newtons (N) downwards.CAUTION for LAN portFor safety reason, do not connect the LAN port to any network devices that might have excessive voltage.The LAN port of this unit is to be connected only to the devices whose power feeding meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited Power Source according to IEC 60950-1 Second Edition.Power SupplyCaution for U.S.A. and CanadaThe SNC-CH140/CH240 operates on 24 V AC or 12 V DC.The SNC-CH140/CH240 automatically detects the power.In the USA, this product shall be powered by a UL listed Class 2 Power Supply Only.In Canada, this product shall be powered by a CSA Certified Class 2 Power Supply Only.Caution for other countriesThe SNC-CH140/CH240 operates on 24 V AC or 12 V DC.The SNC-CH140/CH240 automatically detects the power.Use a power supply rated 24 V AC or 12 V DC which meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited Power Source according to IEC 60950-1 Second Edition.For customers in the U.S.A.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B or Part 15 of FCC Rules.For customers in CanadaThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.For the customers in EuropeThe manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.For the customers in Europe, Australia and New ZealandWARNINGThis is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.In the case that interference should occur, consult your nearest authorized Sony service facility.This apparatus shall not be used in the residential area.ATTENTIONThe electromagnetic fields at specific frequencies may influence the picture of the unit.
Notes on Use
Before UseIf you find condensation when you open the package, turn on the power after the condensation disappears.Remove the static electricity before operation or when touching the camera.Data and securityYou should keep in mind that the images or audio you are monitoring may be protected by privacy and other legal rights, and the responsibility for making sure you are complying with applicable laws is yours alone. Access to the images and audio is protected only by a user name and the password you set up. No further authentication is provided nor should you presume that any other protective filtering is done by the service. Since the service is Internet-based, there is a risk that the image or audio you are monitoring can be viewed or used by a third-party via the network.SONY IS NOT RESPONSIBLE, AND ASSUMES ABSOLUTELY NO LIABILITY TO YOU OR ANYONE ELSE, FOR SERVICE INTERRUPTIONS OR DISCONTINUATIONS OR EVEN SERVICE CANCELLATION. THE SERVICE IS PROVIDED AS-IS, AND SONY DISCLAIMS AND EXCLUDES ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE SERVICE INCLUDING, BUT NOT LIMITED TO, ANY OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THAT IT WILL OPERATE ERROR-FREE OR CONTINUOUSLY.Security configuration is essential for wireless LAN. Should a problem occur without setting security, or due to the limitation of the wireless LAN specifications, SONY shall not be liable for any damage, loss of recorded data or restoration thereof.Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.If you lose data by using this unit, SONY accepts no responsibility for restoration of the data.Personal informationThe images taken by the system using this device can identify individuals and thus they fall under “personal information” stipulated in the “Act on the Protection of Personal Information”. Please handle the video data appropriately according to law.Information recorded using this product may also be “personal information”. Upon disposal, transfer, repair, or any other occasion where this product or storage media is passed on to a third party, practice due care in its handling.Operating or storage locationAvoid operating or storing the camera in the following locations.Extremely hot or cold places (Operating temperature: 10°C to +50°C [14°F to 122°F])Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)Close to sources of strong magnetismClose to sources of powerful electromagnetic radiation, such as radios or TV transmittersLocations subject to strong vibration or shockHumid or dusty locationsLocations exposed to rainLocations under the influence of fluorescent light or reflection of a windowUnder an unsteady light (the image will flicker.)VentilationTo prevent heat buildup, do not block air circulation around the camera.TransportationAlways turn off the power when carrying.When transporting the camera, repack it as originally packed at the factory or in materials of equal quality.CleaningUse a blower to remove dust from the lens.Use a soft, dry cloth to clean the external surfaces of the camera. Stubborn stains can be removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.Note on laser beamsLaser beams may damage image sensors. You are cautioned that the surface of image sensors should not be exposed to laser beam radiation in an environment where a laser beam device is used.
Phenomena Specific to Image Sensors
The following phenomena that may occur in images are specific to image sensors. They do not indicate a malfunction.White flecksAlthough the image sensors are produced with high-precision technologies, fine white flecks may be generated on the screen in rare cases, caused by cosmic rays,
etc.
This is related to the principle of image sensors and is not a malfunction.The white flecks especially tend to be seen in the following cases:- when operating at a high environmental temperature- when you have raised the gain (sensitivity)- when using the slow shutterAliasingWhen fine patterns, stripes, or lines are shot, they may appear jagged or flicker.
About the imaging conditions
When Auto Iris is set to On, resolution may be unsatisfactory. In this case, set Auto Iris to Off.When View-DR is set to On, resolution may be unsatisfactory. In this case, set View-DR to Off, Auto Iris to Off and shutter speed to Auto (SNC-CH240).When using the manual Iris, set View-DR to Off (SNC-CH240).
About the Supplied Manuals
Installation Manual (this document)This Installation Manual describes the names and functions of parts and controls of the Network Camera, gives connection examples and explains how to set up the camera. Be sure to read the Installation Manual before operating.User’s Guide (stored in the CD-ROM)The User’s Guide describes how to set up the camera and how to control the camera via a Web browser.After installing and connecting the camera correctly, operate referring to this User’s Guide.
Using the CD-ROM Manuals
The supplied CD-ROM disc includes the User’s Guides for this unit in PDF format.PreparationsThe Adobe Reader Version 6.0 or higher must be installed on your computer in order to use the guides stored in the CD-ROM disc. Note If Adobe Reader is not installed, it may be downloaded from the following URL: http://www.adobe.com/Reading the manual in the CD-ROM
1 Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web browser. If it does not appear automatically in the Web browser, double-click on the index.htm file on the CD-ROM.
2 Select and click on the manual that you want to read.
This opens the PDF file of the manual. Clicking an item in the Table of Contents allows you jump to the relevant page.Notes The files may not be displayed properly, depending on the version of Adobe Reader. In this case, install the latest version, which you can download from the URL mentioned in “Preparations” above.If you have lost or damaged the CD-ROM, you can purchase replacement. Contact your Sony service representative.Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Location and Function of Part
Front
LensA vari-focal lens is mounted as standard equipment. Focus ringTurn this ring toward N (near) to focus on a closer object. Turn it toward F (infinite) to focus on a farther object. Zoom ringTurn this ring toward T for telephoto, or toward W for wide-angle. Tripod screw holeUse this screw hole when attaching the camera to a tripod (screw: 1/4”, 20 UNC). You can attach a tripod to either the top or bottom of the camera.CautionUse the mounting screw whose length is 4.5 mm – 7 mm only. Use of other screws may cause improper mounting and damage parts inside the camera. Rating LabelThis label shows the name of device and its electric rating. Lens connector (4-pin socket)Supplies power and control signals to an auto-iris lens.
Rear
DC 12 V/AC 24 V (power input) terminalConnect to a 12 V DC or 24 V AC power supply system. LAN network port (RJ-45)Connect to a hub on the 10BASE-T/100BASE-TX network using a network cable (UTP, category 5).Refer to “Connecting the power source” on the reverse side for PoE connection. Easy Focus buttonPress this button to automatically adjust the focus.To load the default setting, press and hold this button for 4 seconds. Fall-prevention wire rope mounting screw holeWhen installing the camera to the ceiling or the wall, secure the supplied wire rope to this hole using the supplied screw. VIDEO OUT (video output) connectorConnect the BNC cable (not supplied) to this connector.
Note
The output image is mainly used to adjust the view angle, and may not display correctly, depending on the video format and image size settings. The image may not display properly in the horizontal and/or vertical plane.The image may be reduced. U (ground) terminalThis is a ground terminal for the chassis. CF card lever Press the lever to remove the CF memory card** from the CF card slot. CF card slotThis slot is used for the optional SNCA-CFW5* wireless card or CF memory card**.Insert the SNCA-CFW5* into the slot and attach the optional wireless LAN antenna SNCA-AN1* to the camera to extend the communicable distance by wireless LAN.NotesInsert the CF memory card with its bottom side facing the camera’ NETWORK indicator.* SNCA-CFW5 and SNCA-AN1 are not available in some countries and areas. For details, contact your authorized Sony dealer.** For inquiries regarding verified CF memory cards, contact your authorized Sony dealer. CF card slot cover To remove the CF card slot cover, pull the cover forward.When reinstalling the CF card slot cover, be sure the cover is completely closed. NTSC/PAL switchSwitching the video output. I/O (Input/Output) portThis cable is provided with a sensor input and two alarm outputs.The wires of the cable control the following signals.PinNo. Signal1 Sensor input+ 2 Sensor input– (GND) 3 Alarm output 1+4 Alarm output 1–5 Alarm output 2+6 Alarm output 2–For details on each function and required settings, see the User’s Guide stored in the supplied CD-ROM.For the wiring, see “Connecting the I/O cable.” 5 (line output) jack (minijack, monaural)Connect a commercially available speaker system with a built-in amplifier. POWER indicator (Green)When the power is supplied to the camera, the camera starts checking the system. If the system is normal, this indicator lights up. If a system error occurs, this indicator flashes every second. In this case, consult your authorized Sony dealer. m (microphone input) jack (minijack, monaural)Connect a commercially available microphone. This jack supports plug-in-power microphones (rated voltage: 2.5 V DC). NETWORK indicator (Green/Orange)The indicator lights up or flashes when the camera is connected to the network. The indicator is off when the camera is not connected to the network. When 100BASE-TX is connected, the indicator turns green. When 10BASE-T is connected, the indicator turns orange. Reset switchTo reset the camera to the factory default settings, turn on the power to the camera while holding down this switch with a pointed object.(continued on the reverse side)
2009 Sony Corporation Printed in China
U1/4”, 20 UNC = 4.5 mm - 7 mm(ISO standard) (with thescrews fastened)
Sony SNC-CH240

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Sony SNC-CH240 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Sony SNC-CH240 rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Sony SNC-CH240. Il manuale rientra nella categoria Telecamera di sorveglianza ed è stato valutato da 1 persone con una media di 8.3. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Sony SNC-CH240 o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Sony SNC-CH240

Generale
Marca Sony
Modello SNC-CH240
Prodotto Telecamere di sorveglianza
EAN 27242783959
Lingua Inglese
Tipo di file PDF
Video
Formati video supportati H.264
Risoluzione massima 1920 x 1440 Pixel
Frame rate 30 fps
Formato video analogico NTSC,PAL
Macchina fotografica
Angolo di visualizzazione (orizzontale) 101.2 °
Velocità otturatore 1 - 1/10000 s
Illuminazione min. 0.25 lx
Bilanciamento del bianco Auto,Manual
Sensore d'immagine
Tipo sensore CMOS
Dimensioni sensore ottico 1/2.8 "
Scansione progressiva
Sistema di lente
Lunghezza focale 2.8 - 6 mm
Zoom digitale 2 x
Zoom ottico 2.1 x
Sicurezza
Riconoscimento movimento video
Allarme attivo di interferenza
Audio
Rapporto segnale/rumore (SNR) 50 dB
Codec audio G.711/G.72
Collegamento in rete
Tecnologia di cablaggio 10/100Base-T(X)
Protocolli di rete supportati IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP, SNMP (MIB-2)
Altre caratteristiche
Alimentazione AC 24 V, DC 12 V
Uscita audio 1
Dimensioni (LxPxA) 72 x 197.3 x 63 mm
Sistema operativo compatibile Windows XP, Windows Vista, Windows 7
Numero F (apertura relativa) F1.3 (W), F1.9 (T)
Gestione energetica
Supporto Power over Ethernet (PoE)
Consumi 11.2 W
Tipologia alimentazione PoE
Connettività
Microfono, spinotto d'ingresso
Quantità porte Ethernet LAN (RJ-45) 1
Veduta notturna
Visione notturna
Dimensioni e peso
Peso 650 g
null
Requisiti di sistema
Processore minimo Intel Core2 Duo 2 GHz
RAM minima 1024 MB
Condizioni ambientali
Intervallo temperatura di funzionamento -10 - 50 °C
Intervallo di temperatura -20 - 60 °C
Prestazione
Certificazione UL2044, FCC 15B A, IC A, IEC60950-1, EN55022(A)+EN55024+EN50130-4, VCCI A, C-Tick
Mostra di più

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Sony SNC-CH240 .

La tua domanda non è elencata? Fai la tua domanda qui