Sony SRS-BTX500

Sony SRS-BTX500 manuale

(1)
  • Personal Audio System
    ©2013 Sony Corporation Printed in China
    4-457-524-12(1)
    SRS-BTX500
    Function of Parts
    BATTERY/CHARGE indicator
    Lights up, flashes or turns off depending on the status of
    the system.
    For details, see the following section, “Indications of BATTERY/
    CHARGE indicator.
    N-mark
    Touch to make Bluetooth connection with an NFC
    compatible smartphone.
    (call) button
    Press to call or operate during a call.
    VOLUME −/+ buttons
    Adjusts the volume.
    Illumination lamp
    Lights up in a variety of colors depending on the status of
    the system. For details, see the following section,
    “Indications of Illumination lamp.
    Microphone
    Use during a call.
    Stand
    Open to use the system.
    DC IN 15V jack
    Connects the supplied AC adaptor.
    AUDIO IN jack
    Connects to the headphone jack of a portable audio device,
    computer, etc., using a connecting cord (not supplied).
    BLUETOOTH STANDBY switch
    Turns on and off the Bluetooth standby mode.
    RESET button
    Resets the system.
    DC OUT ONLY connector (USB)
    Charges devices, such as your smartphone, etc. by
    connecting to the DC OUT ONLY connector (USB connector).
    SOUND button
    Press to select a sound effect.
    SOUND indicator
    Lights up, according to the sound effect setting.
    AUDIO IN button
    Press to listen to sound from a device connected by a
    connecting cord (not supplied).
    AUDIO IN indicator (amber)
    Lights up in AUDIO IN mode.
    BLUETOOTH-PAIRING button
    Press to pair with a Bluetooth device.
    Bluetooth indicator (blue)
    Lights up, flashes or turns off depending on the
    communication status.
    For details, see the following section, “Indications of the
    Bluetooth function.
    / button
    Turns the system on/off.
    Indications of BATTERY/CHARGE
    indicator (built-in lithium-ion battery)
    Status BATTERY/CHARGE indicator
    System turned on Lights up (green) (battery
    operation only)
    Battery requires charging
    Flashes (green)
    Charging battery
    Lights up (amber)
    Charging complete
    Off
    Indications of Illumination lamp
    Status Illumination lamp
    AUDIO IN mode Lights up (white)
    Searching for a device
    Lights up (white)
    Connecting to Bluetooth
    device
    Lights up (blue)
    Pressing VOLUME−/+
    buttons
    Flashes once (white)
    When the volume hits the
    maximum or minimum
    Flashes three times (white)
    Tip
    To turn the illumination on/off, hold down the
    BLUETOOTH-PAIRING button, then press and hold the /
    button.
    Indications of the Bluetooth function
    Status Bluetooth indicator (blue)
    Pairing with a device Flashes quickly
    Searching for a device Flashes
    Connected to a device Lights up
    Bluetooth standby mode
    Flashes slowly
    Opening the Stand
    The system stands itself by opening the stand.
    To close the stand
    Close the stand to the opposite way of arrow.
    Turning the System on
    and off/Charging the
    system
    This system can operate by AC adaptor or built-in lithium-ion
    battery (rechargeable). Charge the battery before using the
    system for the first time.
    1 Connect the supplied AC adaptor.
    The BATTERY/CHARGE indicator (amber) lights up when
    the battery is being charged, and turns off when charging
    is complete. It takes approximately 4 hours to charge the
    battery.
    2 Press the / button.
    Tip
    You can operate the system by battery instead of the AC adaptor
    by charging the system before use.
    Notes
    When the BATTERY/CHARGE indicator flashes as below,
    charge the system. In these cases, you cannot charge
    devices via the DC OUT ONLY connector.
    Flashes (green) (Battery power is low).
    Flashes (amber), then turns off after turning on the system
    (No battery power remaining).
    When you switch the power source between AC adaptor
    and battery by connecting/disconnecting the AC adaptor,
    the system stops sound output for a short while. This is not
    a malfunction.
    The maximum power output will be lower when the AC
    adaptor is disconnected.
    In an extremely cold or hot environment, note the following
    points.
    When operating by the AC adaptor, charging may complete
    too quickly, or may not be possible.
    When operating on battery only, the system may stop after
    the BATTERY/CHARGE indicator flashes (green) three times.
    Charge the battery at least twice a year.
    To reset the system
    Press the RESET button on the rear of the system with a
    pointed object if the buttons on the system do not function.
    How to Make Wireless
    Connection with
    Bluetooth Devices
    You can enjoy music and hands-free calling with the system
    wirelessly by using your devices Bluetooth function.
    Choose one of the following three connection methods, best
    suited for the Bluetooth device. For details on how to operate
    your device, refer to the operating instructions supplied with
    the device.
    Pairing with a Bluetooth device:
    see
    Pattern A
    Bluetooth devices need to be “paired” with each other
    beforehand.
    Connecting with a paired device:
    see
    Pattern B
    To listen to music with a Bluetooth device that has been
    paired, see this pattern.
    One touch connection with a smartphone (NFC):
    see
    Pattern C
    Using an NFC compatible smartphone, you can establish a
    Bluetooth connection by just touching the system with it.
    Check the following before operating the system.
    Both the system and the device are placed within 1 m of
    each other.
    The system is connected to the AC adaptor, or the battery is
    sufficiently charged.
    The operating instructions supplied with the device are at
    hand.
    Pattern A
    Pairing and connecting with a
    Bluetooth device
    1 Turn on the system.
    The Bluetooth indicator (blue) flashes.
    If the AUDIO IN indicator (amber) lights up, press the
    BLUETOOTH-PAIRING button.
    2 Set the Bluetooth function of the Bluetooth
    device to on.
    For details, refer to the operating instructions supplied
    with the device.
    3 Press and hold the BLUETOOTH-PAIRING
    button on the system until two beeps are
    heard.
    The Bluetooth indicator (blue) begins to flash quickly and
    pairing mode is entered.
    Operating Instructions
    Manual de instrucciones
    English Personal Audio System
    Before operating the system, please read this guide
    thoroughly and retain it for future reference.
    Owners Record
    The serial number is located on the bottom.
    Record the serial number in the space provided below. Refer
    to them whenever you call upon your Sony dealer regarding
    this product.
    Model No. SRS-BTX500
    Serial No. ________________________________
    For customers in the USA
    Please register this product on line at
    http://www.sony.com/productregistration
    Proper registration will enable us to send
    you periodic updates about new products,
    services and other important announcements.
    Registering your product will also allow us
    to contact you in the unlikely event that the
    product needs adjustment or modication.
    Thank you.
    WARNING
    To reduce the risk of fire or electric shock, do not
    expose this apparatus to rain or moisture.
    To reduce the risk of fire, do not cover the ventilation of the
    apparatus with newspapers, tablecloths, curtains, etc. And do
    not place lighted candles on the apparatus.
    To reduce the risk of fire or electric shock, do not expose this
    apparatus to dripping or splashing, and do not place objects
    filled with liquids, such as vases, on the apparatus.
    Do not install the appliance in a confined space, such as a
    bookcase or built-in cabinet.
    Do not expose the batteries (battery pack or batteries
    installed) to excessive heat such as sunshine, fire or the like for
    a long time.
    As the main plug of AC adaptor is used to disconnect the AC
    adaptor from the mains, connect it to an easily accessible AC
    outlet. Should you notice an abnormality in it, disconnect it
    from the AC outlet immediately.
    The unit is not disconnected from the AC power source
    (mains) as long as it is connected to the wall outlet, even if the
    unit itself has been turned off.
    The nameplate and important information concerning safety
    are located on the bottom exterior of the main unit and on the
    surface of the AC adaptor.
    You are cautioned that any changes or modifications not
    expressly approved in this manual could void your authority
    to operate this equipment.
    This equipment must not be co-located or operated in
    conjunction with any other antenna or transmitter.
    This equipment complies with FCC/IC radiation exposure
    limits set forth for an uncontrolled environment and meets
    the FCC radio frequency (RF) Exposure Guidelines in
    Supplement C to OET65 and RSS-102 of the IC radio frequency
    (RF) Exposure rules.
    This equipment has very low levels of RF energy that it
    deemed to comply without maximum permissive exposure
    evaluation (MPE). But it is desirable that it should be installed
    and operated keeping the radiator at least 20 cm or more
    away from persons body (excluding extremities: hands, wrists,
    feet and ankles).
    Under Industry Canada regulations, this radio transmitter may
    only operate using an antenna of a type and maximum (or
    lesser) gain approved for the transmitter by Industry Canada.
    To reduce potential radio interference to other users, the
    antenna type and its gain should be so chosen that the
    equivalent isotropically radiated power (e.i.r.p.) is not more
    than that necessary for successful communication.
    This device complies with Industry Canada license-exempt
    RSS standard(s). Operation is subject to the following two
    conditions: (1) this device may not cause interference, and (2)
    this device must accept any interference, including
    interference that may cause undesired operation of the
    device.
    This Class B digital apparatus complies with Canadian
    ICES-003.
    Important Safety Instructions
    1) Read these instructions.
    2) Keep these instructions.
    3) Heed all warnings.
    4) Follow all instructions.
    5) Do not use this apparatus near water.
    6) Clean only with dry cloth.
    7) Do not block any ventilation openings.
    Install in accordance with the manufacturer’s instructions.
    8) Do not install near any heat sources such as radiators, heat
    registers, stoves, or other apparatus (including amplifiers)
    that produce heat.
    9) Do not defeat the safety purpose of the polarized or
    grounding-type plug. A polarized plug has two blades
    with one wider than the other. A grounding type plug has
    two blades and a third grounding prong. The wide blade
    or the third prong are provided for your safety. If the
    provided plug does not fit into your outlet, consult an
    electrician for replacement of the obsolete outlet.
    10) Protect the power cord from being walked on or pinched
    particularly at plugs, convenience receptacles, and the
    point where they exit from the apparatus.
    11) Only use attachments/accessories specified by the
    manufacturer.
    12) Use only with the cart, stand, tripod, bracket, or table
    specified by the manufacturer, or sold with the apparatus.
    When a cart is used, use caution when moving the
    cart/apparatus combination to avoid injury from tip-over.
    13) Unplug this apparatus during lightning storms or when
    unused for long periods of time.
    14) Refer all servicing to qualified service personnel. Servicing
    is required when the apparatus has been damaged in any
    way, such as power-supply cord or plug is damaged, liquid
    has been spilled or objects have fallen into the apparatus,
    the apparatus has been exposed to rain or moisture, does
    not operate normally, or has been dropped.
    WARNING
    
    Battery may explode if mistreated. Do not recharge,
    disassemble or dispose of in fire.
    
    Dispose of used battery promptly, according to local
    environmental laws and guidelines in force. Keep away from
    children.
    For the State of California, USA only
    Perchlorate Material - special handling may apply, See
    www.dtsc.ca.gov/hazardouswaste/perchlorate
    Perchlorate Material : Lithium battery contains perchlorate.
    On Copyrights and Licenses
    The Bluetooth® word mark and logos are owned by the
    Bluetooth SIG, Inc. and any use of such marks by Sony
    Corporation is under license.
    The N Mark is a trademark or registered trademark of NFC
    Forum, Inc. in the United States and in other countries.
    Android is a trademark of Google Inc.
    iPhone is a trademark of Apple Inc., registered in the U.S. and
    other countries.
    Other trademarks and trade names are those of their
    respective owners.
    NOTE
    This equipment has been tested and found to comply with the
    limits for a Class B digital device, pursuant to Part 15 of the
    FCC Rules. These limits are designed to provide reasonable
    protection against harmful interference in a residential
    installation. This equipment generates, uses and can radiate
    radio frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful
    interference to radio communications. However, there is no
    guarantee that interference will not occur in a particular
    installation. If this equipment does cause harmful interference
    to radio or television reception, which can be determined by
    turning the equipment off and on, the user is encouraged to
    try to correct the interference by one or more of the following
    measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and
    receiver.
    Connect the equipment into an outlet on a circuit different
    from that to which the receiver is connected.
    Consult the dealer or an experienced radio/TV technician
    for help.
    For the customers in the USA and Canada
    RECYCLING LITHIUM-ION BATTERIES
    Lithium-Ion batteries are recyclable.
    You can help preserve our environment
    by returning your used rechargeable
    batteries to the collection and recycling
    location nearest you.
    For more information regarding
    recycling of rechargeable batteries, call toll free
    1-800-822-8837, or visit http://www.rbrc.org/
    Caution: Do not handle damaged or leaking Lithium-Ion
    batteries.
    Precautions
    Notes when using with a mobile phone
    For details on operation of your mobile phone when
    receiving a telephone call while transmitting the sound
    using the Bluetooth connection, refer to the operating
    instructions supplied with the mobile phone.
    On safety
    Notes on the AC adaptor
    When connecting or disconnecting the AC adaptor, turn off
    the system beforehand. Otherwise, it may cause
    malfunction.
    Use only the supplied AC adaptor. To avoid damaging the
    system, do not use any other AC adaptor.
    Polarity of the plug
    Plug the AC adaptor into a nearby wall outlet (mains). In the
    case of a problem, unplug it from the wall outlet (mains)
    immediately.
    Do not install the AC adaptor in a confined space, such as a
    bookcase or built-in cabinet.
    To reduce the risk of fire or electric shock, do not expose the
    AC adaptor to dripping or splashing, and do not place
    objects filled with liquids, such as vases, on the AC adaptor.
    On placement
    Do not set the speaker in an inclined position.
    Do not leave the system in a location near heat sources, or
    in a place subject to direct sunlight, excessive dust,
    moisture, rain or mechanical shock.
    On operation
    Do not insert any small objects, etc., into the jacks or
    ventilation hole on the rear of the system. The system may
    short out or malfunction.
    On cleaning
    Do not use alcohol, benzine, or thinner to clean the cabinet.
    Others
    If you have any questions or problems concerning this
    system that are not covered in this manual, please consult
    your nearest Sony dealer.
    What is Bluetooth
    Wireless Technology?
    Bluetooth wireless technology is a short-range wireless
    technology that enables wireless data communication
    between digital devices, such as a computer and digital
    camera. Bluetooth wireless technology operates within a range
    of about 10 m.
    Connecting two devices as necessary is common, but some
    devices can be connected to multiple devices at the same
    time.
    You do not need to use a cable for connection, nor is it
    necessary for the devices to face one another, such is the case
    with infrared technology. For example, you can use such a
    device in a bag or pocket.
    Bluetooth standard is an international standard supported by
    thousands of companies all over the world, and employed by
    various companies worldwide.
    Communication system and
    compatible Bluetooth profiles of the
    system
    Profile is standardisation of the function for each Bluetooth
    device specification. The system supports the following
    Bluetooth version and profiles:
    Communication System:
    Bluetooth Specification version 3.0
    Compatible Bluetooth Profiles:
    A2DP (Advanced Audio Distribution Profile): Transmitting
    or receiving audio content of high-quality.
    AVRCP (Audio Video Remote Control Profile): Controlling
    the volume.
    HSP (Headset Profile): Talking on the phone/Operating the
    phone.
    HFP (Hands-free Profile): Talking on the phone/Operating
    the phone by hands-free.
    Maximum communication range
    Use Bluetooth devices within 10 m (line of sight) of the system.
    Maximum communication range may shorten under the
    following conditions.
    There is an obstacle such as a person, metal, or wall
    between the system and Bluetooth device.
    A wireless LAN device is in use near the system.
    A microwave oven is in use near the system.
    A device that generates electromagnetic radiation is in
    use near the system.
    Interference from other devices
    Because Bluetooth devices and wireless LAN (IEEE802.11b/g)
    use the same frequency, microwave interference may occur
    and resulting in communication speed deterioration, noise, or
    invalid connection if the system is used near a wireless LAN
    device. In such a case, perform the following.
    Use the system at least 10 m away from the wireless LAN
    device.
    If the system is used within 10 m of a wireless LAN device,
    turn off the wireless LAN device.
    Interference to other devices
    Microwaves emitting from a Bluetooth device may affect the
    operation of electronic medical devices. Turn off the system
    and other Bluetooth devices in the following locations, as it
    may cause an accident.
    where inflammable gas is present, in a hospital, train,
    airplane, or a gas station
    near automatic doors or a fire alarm
    Notes
    To be able to use the Bluetooth function, the Bluetooth
    device to be connected requires the same profile as the
    systems.
    Note also that even if the same profile exists, devices may
    vary in function depending on their specifications.
    Due to the characteristic of Bluetooth wireless technology,
    the sound played on the system is slightly delayed from the
    sound played on the Bluetooth device during talking on the
    telephone or listening to the music.
    This system supports security capabilities that comply with
    the Bluetooth standard to provide a secure connection
    when the Bluetooth wireless technology is used, but
    security may not be enough depending on the setting. Be
    careful when communicating using Bluetooth wireless
    technology.
    We do not take any responsibility for the leakage of
    information during Bluetooth communication.
    A device featuring the Bluetooth function is required to
    conform to the Bluetooth standard specified by Bluetooth
    SIG, and be authenticated. Even if the connected device
    conforms to the above mentioned Bluetooth standard,
    some devices may not be connected or work correctly,
    depending on the features or specifications of the device.
    Noise or sound skips may occur depending on the Bluetooth
    device connected with the system, the communication
    environment or the usage environment.
    Tip
    When the system is turned on first time, the
    Bluetooth
    indicator (blue) starts flashing quickly.
    Flashes
    quickly
    4 Perform the pairing procedure on the
    Bluetooth device to detect the system.
    5 Select “SRS-BTX500” shown in the display of
    the Bluetooth device.
    If “SRS- BTX500” does not appear on the device’s display,
    repeat from step 2.
    Note
    Some devices cannot display a list of detected devices.
    6 If Passcode* input is required on the display
    of the Bluetooth device, input “0000.
    The Bluetooth connection is established and the Bluetooth
    indicator (blue) on the system stays on.
    * Passcode may be called “Passkey, “PIN code, “PIN
    number, or “Password.
    Tip
    To pair with other
    Bluetooth devices, repeat steps 2 to 6 for each
    device.
    Notes
    Pairing mode of the system is cancelled after about 5 minutes,
    and the Bluetooth indicator (blue) flashes. If the pairing mode is
    cancelled while performing this procedure, start over from
    step 3.
    Passcode of the system is fixed as “0000. The system cannot be
    paired with a Bluetooth device whose Passcode is not “0000.
    Once
    Bluetooth devices are paired, there is no need to pair those
    devices again. However, in the following case, you will need to
    perform the pairing procedure again.
    The system is paired with 9 or more devices.
    The system can be paired with up to 8 Bluetooth devices. If a
    new device is paired after 8 devices have been paired, the
    device whose latest connection time is the oldest among the
    8 paired devices is replaced by the new one.
    More than one device can be paired with the system, but sound
    will be heard from just one of those devices.
    Pattern B
    Connecting with a paired
    Bluetooth device
    1 Turn on the system.
    The Bluetooth indicator (blue) flashes.
    If the AUDIO IN indicator (amber) lights up, press the
    BLUETOOTH-PAIRING button.
    2 Set the Bluetooth function of the Bluetooth
    device to on.
    Tip
    In the case of the last-connected
    Bluetooth device, the
    system tries to re-establish Bluetooth connection with it if
    the device’s Bluetooth function is on. When Bluetooth
    connection is established, the Bluetooth indicator (blue) on
    the system stays on.
    3 Select “SRS-BTX500” shown in the display of
    the Bluetooth device.
    If necessary, select a Bluetooth profile that the system
    supports from the following: A2DP, HSP or HFP. For details
    on each profile, see “What is Bluetooth Wireless Technology?”
    The Bluetooth connection is established and the Bluetooth
    indicator (blue) on the system stays on.
    Notes
    This step may not be necessary for some devices.
    If the system cannot connect to the
    Bluetooth device, delete
    “SRS-BTX500” from the Bluetooth device, then perform
    pairing again.
    Bluetooth standby mode
    When the Bluetooth standby mode is set to ON, the system can
    be turned on and operated by a Bluetooth device.
    Note
    If the system is being powered by battery, even if the
    system is turned off, battery power will continue to be
    consumed if the BLUETOOTH STANDBY switch is set to ON.
    Pattern C
    Connecting with a smartphone
    by One touch (NFC)
    By just touching the system with an NFC compatible
    smartphone, the system is turned on automatically and then
    paired and connected with the smartphone.
    1 Download and install the app “NFC Easy
    Connect” on the smartphone.
    “NFC Easy Connect” is an original app by Sony for Android
    phones, and is available at Google Play Store.
    Search for “NFC Easy Connect” or scan the following two-
    dimensional code to download and install the free app.
    Communication fees are required to download the app.
    The app may not be downloadable in some country/
    regions.
    Tip
    For some smartphones, One touch connection may be
    available without downloading the app “NFC Easy Connect.
    In that case, the operation and specifications may be
    different from the description here. For details, refer to the
    operating instructions supplied with the smartphone.
    By the two-dimensional code:
    Use a two-dimensional code reader app.
    Compatible smartphones
    Smartphones with the NFC function built-in
    (OS: Android 2.3.3 or later, excluding Android 3.x)
    About NFC
    NFC (Near Field Communication) is a technology enabling
    short-range wireless communication between various
    devices, such as mobile phones and IC tags. Thanks to the
    NFC function, data communication can be achieved easily
    just by touching the relevant symbol or designated
    location on NFC compatible devices.
    2 Start the app “NFC Easy Connect on the
    smartphone.
    Make sure that the application screen is displayed.
    3 Touch the system with the smartphone.
    Keep touching the smartphone on the N marked part of
    the system until the smartphone vibrates.
    Smartphone vibrates
    (system recognized)
    Follow the on-screen instructions to establish the
    connection.
    When the Bluetooth connection is established, the
    Bluetooth indicator (blue) stays on.
    DC IN 15V jack
    AUDIO IN jack
    BLUETOOTH
    STANDBY switch
    RESET
    button
    DC OUT ONLY
    connector (USB)
    Tips
    If it is difficult to establish the connection, try the following.
    Activate the app “NFC Easy Connect and move the
    smartphone slightly on the N marked part of the system.
    If the smartphone is in a case, remove it.
    Touch the system with the smartphone again to disconnect.
    If you have multiple NFC compatible devices, just touch the
    smartphone to a different device to switch the connection
    to that device. For example, when your smartphone is
    connected with NFC compatible headphones, just touch the
    smartphone to the system to change the Bluetooth
    connection to the system (One touch connection switching).
    Listening to Music
    You can enjoy music wirelessly, via the Bluetooth function built
    in your devices.
    Operations may vary depending on the Bluetooth device.
    Refer also to the operating instructions supplied with your
    Bluetooth device.
    1 Make the Bluetooth connection between the
    system and the device.
    For details on the Bluetooth connection procedure, see
    “How to Make Wireless Connection with Bluetooth
    Devices. When the Bluetooth connection is established,
    the Bluetooth indicator (blue) on the system stays on.
    2 Start playback on the Bluetooth device, then
    adjust the volume.
    Set the volume of the Bluetooth device to a moderate
    level, and press the VOLUME –/+ buttons on the system.
    Auto power off
    The system automatically turns off after about 20 minutes
    when the hands-free is not being used (the system is not
    connected with a Bluetooth device via HFP/HSP), and when no
    device is being charged via the DC OUT ONLY connector, and
    when no music is being played.
    After use
    Do any of the following.
    Set the Bluetooth function of the Bluetooth device off. For
    details, refer to the operating instructions supplied with the
    device.
    Turn off the Bluetooth device.
    Turn off the system.
    Touch the system with the smartphone again to disconnect
    (NFC compatible smartphones only).
    Using Hands-free Calling
    While Listening to Music
    You can enjoy hands-free calling via Bluetooth connection
    with a Bluetooth mobile phone that has a music function and
    supports the Bluetooth profile A2DP, and HFP or HSP.
    If your Bluetooth mobile phone supports both HFP and HSP,
    set to HFP.
    Operations may vary depending on the Bluetooth mobile
    phone. Refer also to the operating instructions supplied with
    your mobile phone.
    1 Make the Bluetooth connection between the
    system and the mobile phone.
    For details on the Bluetooth connection procedure, see
    “How to Make Wireless Connection with Bluetooth
    Devices. When the Bluetooth connection is established,
    the Bluetooth indicator (blue) on the system stays on.
    2 Start playback on the Bluetooth mobile
    phone, then adjust the volume.
    Set the volume of the Bluetooth mobile phone to a
    moderate level, and press the VOLUME –/+ buttons on the
    system.
    To call
    Operate the Bluetooth mobile phone. Check that a dialing
    tone is heard on the system and talk using the microphone. If
    no dialing tone is heard, press the (call) button on the
    system for about 2 seconds to change the call device to the
    system.
    To receive a call
    When an incoming call arrives, the playback pauses and a ring
    tone is heard from the system. Press the (call) button on
    the system and talk using the microphone.
    Tips
    If no ring tone is heard from the system when incoming call
    arrives, stop playback and press the (call) button to talk.
    You can use the hands-free calling when playback is completed.
    During a call, press the VOLUME –/+ buttons on the system to
    adjust the volume.
    Notes
    The sound is output from the left speaker only during a call.
    Use your smartphone at least 50 cm from the system. Noise may
    result if the system and smartphone are too close.
    To end a call
    Press the (call) button. If you were listening to music when
    the call arrived, it will be resumed when the call has finished.
    After use
    Do any of the following.
    Set the Bluetooth function of the Bluetooth device off. For
    details, refer to the operating instructions supplied with the
    device.
    Turn off the Bluetooth device.
    Turn off the system.
    Touch the system with the smartphone again to disconnect
    (NFC compatible smartphones only).
    Unit button functions during a call
    Available functions may vary depending on the Bluetooth
    mobile phone, or the profiles supported by the Bluetooth
    mobile phone. Refer to the operating instructions supplied
    with the Bluetooth mobile phone.
    Status (call) button
    Standby
    Press once to start voice dial (voice dial
    compatible mobile phones only).
    Press for about 2 seconds to redial the phone
    number that is dialed last time.
    Outgoing
    call
    Press once to cancel outgoing call.
    Press for about 2 seconds to change call
    device between the system and mobile
    phone.
    Incoming
    call
    Press once to answer call.
    Press for about 2 seconds to reject call.
    During
    call
    Press once to finish call.
    Press for about 2 seconds to change call
    device between the system and mobile
    phone.
    Using Hands-free calling with another
    Bluetooth mobile phone while
    listening to music
    This system is compatible with Multipoint technology, which
    allows you to enjoy hands-free calling while listening to music
    from a Bluetooth-compatible music player.
    One touch connection (NFC) cannot be used in this
    procedure.
    Operations may vary depending on the Bluetooth device.
    This type of Bluetooth connection may not be established
    depending on the combination of the Bluetooth devices.
    Refer also to the operating instructions supplied with your
    Bluetooth devices.
    N-mark
    BATTERY/CHARGE
    indicator
    VOLUME −/+
    buttons
    (call) button
    SOUND button/
    indicator
    AUDIO IN button/
    indicator
    BLUETOOTH -PAIRING
    button
    Bluetooth indicator
    / button
    Illumination lamp
    Microphone
    1 Make the Bluetooth connections between the
    system and a Bluetooth music player via
    A2DP, and between the system and a
    Bluetooth mobile phone via HFP or HSP.
    For details on the Bluetooth connection procedure, see
    “How to Make Wireless Connection with Bluetooth
    Devices. When the Bluetooth connection is established,
    the Bluetooth indicator (blue) on the system stays on.
    Tips
    To use only the calling function of a
    Bluetooth mobile phone
    that also has a music function, establish Bluetooth
    connection between the system and the mobile phone via
    HFP or HSP, not via A2DP.
    Depending on the
    Bluetooth mobile phone, while the
    Bluetooth connection is established via HFP or HSP, the
    other Bluetooth connection via A2DP may also be occupied
    by the same Bluetooth mobile phone. A Bluetooth music
    player cannot be connected with this system in this case.
    Note
    To make the same connection with the same devices after
    turning the system off, follow this procedure again.
    To Enjoy the Sound Effect
    Setting
    You can enjoy sound effects as desired.
    1 Press the SOUND button to select the sound
    effect.
    The SOUND indicator (see below) shows the current sound
    effect setting.
    You can switch between effects by repeatedly pressing the
    SOUND button.
    Status Sound effect
    Amber High-quality bass sound will be heard (MEGA
    BASS). This setting is enabled by default when
    you first turn on the system.
    Green Surround sound will be heard (MEGA
    BASS+SURROUND).
    Off The sound effect is off.
    Tip
    The system remembers the last sound effect setting next time it
    is turned on.
    Listening to Music by
    Wired Connection with a
    Portable Audio Device,
    etc.
    1 Connect the device to the system.
    Connecting cord (not supplied)
    (Stereo mini jack)
    2 Turn on the system.
    3 Turn on the connected device.
    4 Press the AUDIO IN button on the system.
    5 Operate the connected device.
    Set the volume of the connected device to a moderate
    level, then press the VOLUME –/+ buttons on the system.
    Notes
    You cannot play music only by connecting to the system with
    the connecting cord. Make sure to also press the AUDIO IN
    button.
    Hands-free calling is not available while you are listening to
    music from a device connecting to the system by the connected
    cord.
    Auto power off
    The system automatically turns off after about 20 minutes
    when the hands-free is not being used (the system is not
    connected with a
    Bluetooth
    device via HFP/HSP), and when
    no device is being charged via the DC OUT ONLY connector,
    and when no music is being played.
    Charging USB Devices,
    such as Smartphones, via
    a USB Connection to the
    System
    You can charge your smartphone by connecting it to the DC
    OUT ONLY connector (USB) of the system, even when using
    the system by the built-in battery only. Turn on the system in
    order to charge a USB device.
    USB cable
    (not supplied)
    Note
    This function is not for data communication by USB cable.
    Disposing of the System
    For environment protection, remove the built-in lithium-ion
    battery pack from the system.
    Before removing the battery, drain the battery by removing
    the AC adaptor and using the system only with the battery.
    Take out the lithium-ion battery for recycling.
    Do not open the cabinet other than when disposing of
    the system.
    1 Turn off the system and remove the AC
    adaptor.
    2 Detach the cover of the rear of the system to
    remove the battery pack.
    Open the stand.
    Remove the 4 rubber covers from the bottom of the
    system.
    Remove the 4 screws.
    Remove the cover.
    Remove the connector plug from the system.
    Remove the battery.
    Note
    Be careful not to damage the code cover with metallic tweezers,
    etc. when you remove the battery pack from the system.
    Specifications
    Speaker section
    Speaker system Satellite speaker:
    Approx. 48mm (1
    15
    /16 in) dia. × 2
    Subwoofer:
    Approx. 80mm (3
    1
    /4 in) dia. × 1
    Enclosure type
    Satellite speaker: Sealed enclosure
    Subwoofer: Passive radiator model
    Amplifier section
    Reference output power
    Using AC adaptor: 10 W + 10 W (Satellite
    speaker, at 1 % harmonic distortion, 1 kHz,
    6 Ω) 20 W (Subwoofer, at 1 % harmonic
    distortion, 100 Hz, 4 Ω)
    Using battery: 4 W + 4 W (Satellite speaker,
    at 10 % harmonic distortion, 1 kHz, 6 Ω)
    8 W (Subwoofer, at 10 % harmonic
    distortion, 100 Hz, 4 Ω)
    Bluetooth
    Communication System
    Bluetooth Specification version 3.0
    Output
    Bluetooth Specification Power Class 2
    Maximum communication range
    Line of sight approx. 10 m (30 ft)*
    1
    Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
    Modulation method
    FHSS
    Compatible Bluetooth Profiles*
    2
    A2DP (Advanced Audio Distribution
    Profile)
    AVRCP (Audio Video Remote Control
    Profile)
    HSP (Headset Profile)
    HFP (Hands-free Profile)
    Supported Codec*
    3
    SBC*
    4
    , AAC*
    5
    Transmission range (A2DP)
    20 Hz - 20,000 Hz (Sampling frequency
    44.1 kHz)
    *
    1
    The actual range will vary depending on factors such as
    obstacles between devices, magnetic fields around a
    microwave oven, static electricity, reception sensitivity,
    aerial’s performance, operating system, software
    application, etc.
    *
    2
    Bluetooth standard profiles indicate the purpose of
    Bluetooth communication between devices.
    *
    3
    Codec: Audio signal compression and conversion format
    *
    4
    Subband Codec
    *
    5
    Advanced Audio Coding
    Microphone
    Type: Electret condenser
    Directional characteristic:
    Omni directional
    Effective frequency range:
    50 Hz -10 kHz
    General
    Input AUDIO IN jack (ø 3.5 mm stereo mini jack)
    DC OUT USB jack Type A (for charging the battery
    of a connected device) (5 V, Max.1.5 A)
    Power DC 15 V (using the supplied AC adaptor
    connected to AC 100 V - 240 V, 50 Hz/60 Hz
    power supply) or, using built-in lithium-ion
    battery
    Usage life of lithium-ion battery (using the Bluetooth
    connection)
    approx. 6 hours*
    6
    Dimensions (including projecting parts and controls)
    Approx. 385.0 mm × 152.0 mm × 65.0 mm
    (15
    1
    /4 in × 6 in × 2
    5
    /8 in) (w/h/d)
    Mass Approx. 2,000 g (4 lb 7 oz)
    including battery
    Supplied accessories
    AC adaptor (AC-E1530) (1)
    Operating Instructions (this document) (2)
    Bluetooth
    ® Startup Guide (1)
    Warranty card (2)
    Carrying case (1)
    *
    6
    Time may vary, depending on the temperature or
    conditions of use.
    Design and specifications are subject to change without
    notice.
    Troubleshooting
    No sound / Sound from only one speaker /
    Low sound level
    Check that both this system and
    the connected device are turned
    on.
    If you are connecting a personal
    computer to the system, make sure
    the audio output setting of the
    computer is set for a Bluetooth
    device.
    Turn up the volume of the system
    and the connected device.
    Pair this system and the Bluetooth
    device again.
    Check that the connected device is
    being played back.
    If the connected device is monaural,
    sound will only be output from the
    left speaker.
    Check that both plugs of the
    connecting cord (not supplied) are
    firmly inserted into the system and
    the connected device.
    Distorted sound /
    Humming or noise in the system output
    Turn down the volume of the
    connected device.
    Keep the system away from a TV.
    If the connected device has an
    equalizer function, set it to off.
    Switch the Bluetooth connection to
    A2DP by operating the Bluetooth
    device when HFP or HSP is set.
    Keep the system away from a
    microwave oven, wireless LAN, etc.
    If you connect a device with a built-
    in radio or tuner to this system,
    broadcasts may not be received, or
    sensitivity may be reduced. Locate
    the system farther away from the
    device and check that you can listen
    to the broadcasts satisfactorily.
    Bring this system and the
    Bluetooth device closer together.
    Remove any obstacle between this
    system and the Bluetooth device.
    Charge the system by connecting
    the AC adaptor if the BATTERY/
    CHARGE indicator flashes in green.
    Pairing is not possible
    Bring this system and the Bluetooth
    device to within 1 m of each other.
    If the Bluetooth indicator (blue) is not
    flashing quickly, press and hold the
    BLUETOOTH-PAIRING button on the
    system until two beeps are heard.
    No voice / Low voice from recipient
    Check that both this system and
    the connected device are turned
    on.
    Select HFP or HSP Bluetooth
    connection by operating the
    Bluetooth device.
    Check that output of the Bluetooth
    mobile phone is set for the system.
    Turn up the volume of the system
    and the connected device.
    One touch connection (NFC) is
    not possible
    Keep the smartphone close to the
    system until the smartphone
    vibrates. If you fail, move the
    smartphone slightly on the N
    marked part of the system.
    If the smartphone is in a case,
    remove it.
    Check that the NFC function of the
    smartphone is set to on.
    NFC receiving sensitivity depends on
    the device. If you fail to connect with
    a smartphone by One touch several
    times, connect to the system by on-
    screen operation.
    Check that the “NFC Easy Connect
    app is displayed on the
    smartphone.
    Lights up
    Stand
Sony SRS-BTX500

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Sony SRS-BTX500 o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Sony SRS-BTX500 rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Sony SRS-BTX500. Il manuale rientra nella categoria Altoparlante Bluetooth ed è stato valutato da 1 persone con una media di 8. Il manuale è disponibile nelle seguenti lingue: Inglese, Spagnolo. Hai domande sul Sony SRS-BTX500 o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Sony SRS-BTX500

Generale
Marca Sony
Modello SRS-BTX500
Prodotto Altoparlanti Bluetooth
EAN 4905524905540
Lingua Inglese, Spagnolo
Tipo di file PDF
Prestazione
Utilizzo raccomandato mobile phone/smartphone
Amplificatore Da Incasso
Comandato a distanza
Radio FM
Design
Design Soundbar
Colore del prodotto Black, Silver
Controllo del volume Digitale
Display incorporato
Altoparlanti
Numero di altoparlanti 1
Numero di driver -
Tipo di speaker 2-vie
Sistema audio -
Audio
Potenza in uscita (RMS) 40
Range di frequenza 20 - 20000
Impedenza -
Altre caratteristiche
Dimensioni (LxPxA) 341 x 72 x 115
Connettività
Portata Bluetooth 10
Tecnologia di connessione Senza fili
Ingresso (alimentazione) AC
Range di frequenza 2.4
Bluetooth
Contenuto dell'imballo
Quantità per pacco 1
- Bluetooth
Gestione energetica
Tipologia alimentazione AC, Battery
Tipo batteria Da Incasso
Durata batteria 6
Tempo di ricarica 4
Caricatore incorporato
Dimensioni e peso
Larghezza 341
Profondità 72
Altezza 115
Peso 2000

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Sony SRS-BTX500 .

La tua domanda non è elencata? Fai la tua domanda qui

ManualeD'uso.it

Stai cercando un manuale? ManualeD'uso.it farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.

ManualeD'uso.it

© Copyright 2020 ManualeD'uso.it. Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più