Name: Spatz DVIFIX
Brand: Spatz
SKU: 1033306
Rating: 90 (1 reviews)

manualeSpatz DVIFIX

SPATZ Tel. +49-7335-921400

Mühlhauser Str.5 Fax. +49-7335-921402

73344 Gruibingen e-mail:spatz@spatz-tech.de

Germany

www.spatz-tech.de

HDMIFIX/DVIFIX

Manual/Anleitung Programmable EDID Simulator

Description

The HDMIFIX/DVIFIX is an user programmable EDID Emulator

that manipulates the communication between source and

display.

The source only sees the EDID of the HDMIFIX/DVIFIX and

does not know about the hardware connected beyond the

HDMIFIX/DVIFIX. This ensures user controlled EDID with

predictable results and faster switching times.

BEWARE ! The manipulation of the automatic negotiation

between source and display can cause incompatible resolutions

outputted by the source resulting in a blank picture on the

display !!

480p@60Hz (resolution 1 of table 2) should result in a picture

all the time -this is the minimum shared standard between the

HDMI consumer and professional DVI world.

The HDMIFIX/DVIFIX has two operation modes. The standard

mode allows assignement of one of the 60 Video EDID and the

video output colorspace to one of the 10 user presets (01-10).

All audio formats are turned active in this mode.

PRESET 00 forwards the display EDID to the source, PRESET

11 can learn EDID of any display attached at the

DMIFIX/DVIFIX’s output and forward it to the attached source.

There is an additional fixed 3D EDID that holds the EDID table

of 1080p 3D compatible display and is the preferred setting if

you need a 3D output from a BluRay Player.

Cycling through one of the 13 presets is the standard operation

mode of the unit.

Activation of the Standard Programming Mode:

To activate Standard Programming Mode press the +10 button

for 2 s while powering the unit. The unit displays “S” for 3

seconds.

In the standard mode you can assign one of the 60 output

resolutions and define the colorspace you want the

HDMIFIX/DVIFIX to forward to the source. Pressing MODE one

time will bring you to the video output (Table 2) settings

(VIDEO LED is on). With +1 and +10 buttons you may select

one of the 60 output resolutions. Pressing MODE again will

bring you to the FMT setting (VIDEO and FMT LED is on).

With +1 button you may cycle through the 3 available color

space settings.

If you use the unit with DVI sources that are true DVI then FMT

changes will have no effect, as DVI only uses RGB color space.

Pressing MODE again brings you back in the operation mode.

The FMT LED will flash indicating that a HOTPLUG signal has

been executed. The source should now start renegotiating the

new settings with the HDMIFIX/DVIFIX.

The new setting will automatically be stored in the previous

selected PRESET.

It is mandatory to finish the sequence for activating the new

settings.

Activation of the Expert Programming Mode:

To activate Expert Programming Mode press the +1 button for

2 s while powering the unit. The unit displays “E” for 3 seconds.

In the expert mode you can assign one of the 60 output

resolutions and define the colorspace you want the

HDMIFIX/DVIFIX to forward to the source.

In addition to the standard mode, you can select one of 15

audio formats (Table AUDIO 1), specify the numbers of audio

channels (AUDIO 2), defining audio sample frequency

(AUDIO 3) and specify the bit depth for the PCM audio modes

(AUDIO 4). This is the MODE sequence that is available through

repetitive button presses:

Adjustment Sequence:

VIDEO (00 -60) -> FMT (RGB, C2, C4) ->AUDIO 1 (00-15)

->AUDIO 2 (2CH, 6 CH, 8CH) -> AUDIO 3 (F1-F7) and optional

AUDIO 4 (r1,r2 und r3) for PCM audio modes.

Once you return to the operation mode the unit will flash the

FMT LED indicating that HOTPLUG has been executed. Your

settings will automatically be saved in the previous selected

PRESET.

The source should now start renegotiating the EDID and start

with the settings you have selected in the HDMIFIX/DVIFIX.

Make sure that you cycled through the complete sequence !

ATTENTION !

Not all settings must have an effect on the behaviour of the

source. This is varying from manufacturer and HDMI source as

these may not use all functions specified in the HDMI standard.

The HDMIFIX/DVIFIX is offering you all kind of manipulations

provided

by the standard but has no control over the implementation of

firmware in the individual sources.

HOTPLUG -activating the settings

The Hotplug signal is the signal that initiates the

resynchronizing of the source. Once the source detects this

signal it starts rereading the EDID.

To force the EDID rereading at any time simply press the

MODE button for 2s. The FMT LED will flash.

Read EDID Save into PRESET 11

HDMIFIX/DVIFIX can learn the EDID of any display that is

connected to the output connector. You may use any HDMI or

DVI display.

Please select PRESET 11.

Press MODE (first) and (then) +10 simultanously until the

display flashes.

You have now succesfully stored the EDID of the attached

display to the PRESET 11.

You may use this as a reference for other installs or just use it

with the current install to speed up switching times and ensure

reliable operation. You would have to use one HDMIFIX/DVIFIX

for any of the sources that are in use.

However we recommend to use one the 60 single output

resolutions EDIDs as they will really force the source into the

resolution that works best with your display, instead of using

the one that is marked as “NATIVE” that is probably not the

best choice.

Give it a try and decide yourself !

Consulta qui gratuitamente il manuale per il Spatz DVIFIX. Il manuale rientra nella categoria Non classificato ed è stato valutato da 1 persone con una media di 9. Il manuale è disponibile nelle seguenti lingue: Inglese. Hai domande sul Spatz DVIFIX o hai bisogno di aiuto? Fai la tua domanda qui

Ho bisogno di aiuto?

Hai una domanda relativa a Spatz e la risposta non è nel manuale? Fai qui la tua domanda Fornisci una descrizione chiara e completa del problema e della tua domanda. Migliore sarà la descrizione del tuo problema e della domanda, più facile sarà per gli altri proprietari di Spatz fornirti una buona risposta.

Numero di domande: 0

Generale

	Spatz
	DVIFIX \| DVIFIX
	Non classificato
	4260180550412
	Inglese
	Manuale d'uso (PDF)

Caratteristiche

Quantità bande equalizzatore	-
Ingresso audio	-
Colore del prodotto	Nero

Dimensioni e peso

Larghezza	70 mm
Profondità	30 mm
Altezza	105 mm

Mostra di più

Non riesci a trovare la risposta alla tua domanda nel manuale? Puoi trovare la risposta alla tua domanda nelle FAQ sul Spatz DVIFIX che trovi di seguito.