Stagg 500 BAH

Stagg 500 BAH manuale

    1) INPUT - Plug your bass in here. We recommend that you always use a high-quality shielded cable to
    prevent any background noise interference or unwanted feedback.
    2) VOLUME - This control determines the level of the input signal going into the amplier.
    3) PASSIVE/ACTIVE - When released (or off), this selector switches the INPUT of the amplier to a high
    impedance (sensitivity) circuit, suitable for basses with PASSIVE electronics. When pushed in (or on), it
    connects the INPUT to a low impedance (sensitivity) circuit, suitable for use with ACTIVE basses.
    4) TREBLE - This control determines the level of high frequencies in the output signal. Adding TREBLE will
    make your bass sound brighter and sharper.
    5) MID - This control determines the level of middle frequencies in the output signal. Adding MID will
    make your bass sound rounder and fuller.
    6) BASS - This control determines the level of low frequencies in the output signal. Adding BASS will make
    your bass sound warmer and heavier.
    7) COMPRESSION - This control reduces the dynamic range of the output signal and evens out the
    changes in volume that occur according to how hard you play your instrument. Adding COMPRESSION will
    make your bass sound smoother and clearer.
    8) MASTER - This controls the overall listening level of the amplier. Adjust it to your preferred level.
    9) CD/MP3 INPUT - This is a line level 1/4" (Ø 6.3 mm) stereo jack into which an MP3/CD/Tape player
    may be connected.
    10) EFX SEND - This amplier is equipped with an effects loop which allows you to plug effects between
    the preamp and the power amp. The EFX SEND jack is a line level 1/4" (Ø 6.3 mm) output jack into which
    you may connect one or several outboard effects, eg Flanger, Delay, Chorus etc. The EFX SEND should be
    connected to the input jack of the rst effect in your chain.
    11) EFX RETURN - This is a line level 1/4" 6.3 mm) input jack into which you should connect the
    output jack of the last effect in your chain. The effects loop may also be used with a multi-effects rack
    system, or with a single effect.
    12) BALANCED OUT - This front panel XLR socket drives a post E.Q, post effects, balanced output signal
    for connecting directly to one of the Balanced Microphone inputs of a mixing console.
    13) POWER LED - When this red LED is lit, the amplier is ready to work. When it is off, it means the
    amplier is powered off.
    Features and Specications are subject to change without notice.
    2 3
    500 BAH - 500 BA115 500 BAH - 500 BA115
    1 2 3 4 5 6 7 8 9 10 11 12 13
    STAGG 500 BAH & STAGG 500 BA115
    STAGG 500 BAH & STAGG 500 BA115
    1 2 4 5 5 53
    500 BAH 500 BA115
    This amplier must be earthed. Please check that the supply voltage details given on the rating label
    (located on the rear panel) are in accordance with your electricity supply.
    1 POWER SWITCH - This switch turns the amplier on or off.
    2 POWER FUSE - In the event of the power fuse having to be replaced, rst unplug the power cable from
    the mains outlet. Then remove the fuse cover and replace the power fuse with one of the same type and
    value. Never plug the power cable back into the mains outlet without the fuse cover. When powering on
    the amplier, if the power fuse blows up again, go to a suitable service centre for repair.
    3 MAINS INPUT - This is the input socket into which the mains power cable must be connected. This
    amplier is supplied with a power cable with a moulded-on plug. If the socket outlets in the home are
    not suitable for the plug supplied with this amplier, use an appropriate plug adapter that can handle the
    power required for this amplier.
    4 VOLTAGE SELECT - This switch selects the chosen voltage level between 110-120VAC and 220-
    240VAC as appropriate. This switch may be accessed by unscrewing the safety cover. Always make sure
    that the selected voltage level is in accordance with your electricity supply.
    5 SPEAKER OUT - The 500 BAH head features two external speaker sockets to connect one (or two)
    external Speaker Cabinet(s) providing the total load impedance is not lower than 8 Ohms, while the 500
    BA115 combo allows you to plug one external Speaker Cabinet only with a minimum load impedance of 16
    Ohms, i.e: Stagg 300 BC115 (1x 15”) and Stagg 300 BC410 (4x 10”), 300W RMS/16Ω Speaker Cabinets
    for bass ampliers.
    Description 500W Bass Amp Head
    500W Bass Combo
    and 1x 15" Speaker
    Max. Rated Power 500 Watts RMS @ 8 Ohms 500 Watts RMS @ 8 Ohms
    Speakers (N * Ø/ P/ Z) 1 x 15"/ 300W/ 16 Ohms
    External Speaker Out 2 x SPK 1 x SPK
    Minimum Load 8 Ohms 16 Ohms
    Frequency Response 40 Hz to 20 kHz 40 Hz to 20 kHz
    Total Harmonic Distortion 0.5% 0.5%
    Signal to Noise Ratio - 68 dB @ max Rated Power - 68 dB @ max Rated Power
    Input Impedance 220k Ohms 220k Ohms
    Power Consumption 900 Watts max 900 Watts max
    Maximum Input Level 45 mV RMS 45 mV RMS
    Maximum Gain 47 dB @ 1 kHz 47 dB @ 1 kHz
    Dimensions (H x L x P) 23.5 x 73 x 38 cm 72.5 x 73.5 x 38 cm w/o casters
    Dimensions (H x W x D) 9.2 x 28.7 x 15 in 28.5 x 28.9 x 12.2 in w/o casters
    Weight 29.5 kg / 65.0 lb 55.3 kg/ 121.9 lb
Stagg 500 BAH

Ho bisogno di aiuto?

Numero di domande: 0

Hai domande sul Stagg 500 BAH o hai bisogno di aiuto? Fai qui la tua domanda. Fornisci una descrizione chiara e completa del problema e della domanda. Più dettagli fornisci per il tuo problema e la tua domanda, più facile sarà per gli altri proprietari di Stagg 500 BAH rispondere correttamente alla tua domanda.

Consulta qui gratuitamente il manuale per il Stagg 500 BAH. Il manuale rientra nella categoria Ricevitore ed è stato valutato da 1 persone con una media di 9.3. Il manuale è disponibile nelle seguenti lingue: Engels. Hai domande sul Stagg 500 BAH o hai bisogno di aiuto? Fai la tua domanda qui

Specifiche Stagg 500 BAH

Marca Stagg
Modello 500 BAH
Prodotto Ricevitori
Lingua Engels
Tipo di file PDF

Domande frequenti

Di seguito, troverai le domande più frequenti riguardo Stagg 500 BAH .

La tua domanda non è elencata? Fai la tua domanda qui


Stai cercando un manuale? ManualeD' farà in modo che tu possa trovare il manuale che stai cercando in un attimo. Il nostro database contiene più di 1 milione di manuali in formato PDF di oltre 10.000 marchi. Ogni giorno aggiungiamo i manuali più recenti in modo che sia sempre possibile trovare il prodotto che stai cercando. È molto semplice: basta digitare il marchio e il tipo di prodotto nella barra di ricerca e immediatamente visualizzerai gratuitamente il manuale di tua scelta online.


© Copyright 2021 ManualeD' Tutti I diritti riservati.

Utilizziamo i cookie per essere sicuri che tu possa avere la migliore esperienza sul nostro sito. Se continui ad utilizzare questo sito noi assumiamo che tu ne sia felice.

Leggi di più